ethernet wiring

[Michael Havens]

thanks guys

On Sun, Nov 20, 2011 at 1:21 PM, Derek Trotter <expat.arizonan at gmail.com>wrote:

>  Here's a site I have bookmarked.  I just checked and it's still there.
>
> http://www.incentre.net/content/view/75/2/
>
> It will show you what color wires to put where.
>
>
> On 11/20/2011 13:05, Bryan O'Neal wrote:
>
> Just remember there is no magic to it. You have 2 wires for TX and 2
> for RX. As long as the wires match on each end (pin 1 to pin 1, pin 2
> to pin 2, etc.) it does not matter what color they are.
>
> On 11/20/11, Brian Cluff <brian at snaptek.com> <brian at snaptek.com> wrote:
>
>  First off, you shouldn't need to strip the wires when putting them into
> the jack,  The jacks are designed to cut through the shielding and make
> a connection directly though the shielding.  In fact, I'll bet that the
> connections are much more likely to corrode if you strip them first.
>
> As for the color sequence.  They change a bit depending on what style of
> jack you have and how much the wires twist inside the jack itself.  Just
> go ahead and wire up the jack in the color order that the jack dictates
> and it shouldn't matter if they are in different physical orders on the
> back of the jack.
>
> As for the Jack that shows yellow brown white red etc... It sounds like
> you got a hold of an rj45 based telecom jack.  I would take that back
> and get one that is made for networking.  You could probably get it to
> work just fine if you can figure out the correct wiring order, but why
> not do it right in the first place...
>
> Brian
>
> On 11/20/2011 11:28 AM, Michael Havens wrote:
>
>  So I'm connecting my brothers computer to the internet . I ran the wire
> under the house yesterday (I let him do that... I didn't want to get
> dirty) and drilled a hole today and fed the cable through the hole. Then
> I stripped the cable; first the blue pair, then the green pair, the.....
> I'm sure you get the point. Anyways I'm all excited because now I'm
> going to connect the wires to the jack, then I'll do the other side,
> then my brother is in business! Except I sit down to connect the other
> side when I see a nightmare: instead of blue-green-orange-brown wires
> the colors of the wires are blue, orange, black, red, green, yellow,
> brown, and white; each designated with a number: 1 to 8. Any idea how I
> should wire these?
>
> --
> :-)~MIKE~(-:
>
>
> ---------------------------------------------------
> PLUG-discuss mailing list - PLUG-discuss at lists.plug.phoenix.az.us
> To subscribe, unsubscribe, or to change your mail settings:http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>
>  ---------------------------------------------------
> PLUG-discuss mailing list - PLUG-discuss at lists.plug.phoenix.az.us
> To subscribe, unsubscribe, or to change your mail settings:http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>
>
> ---------------------------------------------------
> PLUG-discuss mailing list - PLUG-discuss at lists.plug.phoenix.az.us
> To subscribe, unsubscribe, or to change your mail settings:
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>



-- 
:-)~MIKE~(-:
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.PLUG.phoenix.az.us/pipermail/plug-discuss/attachments/20111120/b7e03764/attachment.html>