Ummm...need a little bit of router config help...

[Bob Elzer]

Qwest only blocks port 25, I'm running a web on 80 it works ok.
 

-----Original Message-----
From: plug-discuss-bounces at lists.plug.phoenix.az.us
[mailto:plug-discuss-bounces at lists.plug.phoenix.az.us] On Behalf Of Joseph
Sinclair
Sent: Friday, July 03, 2009 4:58 PM
To: Main PLUG discussion list
Subject: Re: Ummm...need a little bit of router config help...

Lisa Kachold wrote:
> On Fri, Jul 3, 2009 at 3:59 PM, Jim March <1.jim.march at gmail.com> wrote:
> 
>> Any idea what I've missed here?
> 
> I believe that the Quest DSL allows port 80 inbound, but I would check
this.
> 

I think Lisa may have hit the problem here:

Try setting the forward on the router to route some other port (e.g. 45786)
on the outside interface to your zoneminder server on port 80.
If that works, then you're dealing with a QWest issue, and you should be
able to just use some alternate high-range port.

BTW, don't try the obvious 8080, 8000, etc...  If they block 80, they
typically block those too.  They almost never block ports above 32768,
however.