OT:Switch boosts ethernet?

[Bob Elzer]

I would bet that a 400ft cable would work just fine. 

I worked in a building where we had a few 600 and 700 ft lines. There were
some intermittent problems, but they usually worked well.
We eventually put in a switch to serve that side of the building, but the
switch was on a 700 ft line and it worked fine.

If it's for just one line, try the 400 ft first and if you have problems go
with the switch.
If it's multiple, run a 400 for the switch, and then feed the systems from
the switch.


-----Original Message-----
From: plug-discuss-bounces at lists.plug.phoenix.az.us
[mailto:plug-discuss-bounces at lists.plug.phoenix.az.us] On Behalf Of Nathan
England
Sent: Thursday, February 19, 2009 12:54 AM
To: Main PLUG discussion list
Subject: Re: OT:Switch boosts ethernet?

On Wednesday 18 February 2009 17:55:59 Alan Dayley wrote:
> Calling wiring gurus!
>
> Maximum ethernet connection length is approx. 300 feet.  If I need to 
> get to 400 feet, can I just put a switch in the middle of two 200 foot 
> cables?
>
> Alan
> ---------------------------------------------------
> PLUG-discuss mailing list - PLUG-discuss at lists.plug.phoenix.az.us
> To subscribe, unsubscribe, or to change your mail settings:
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss


Yes, or you could just run 400 feet of cable, I mean, after all, they do
come in 1000 foot boxes, right?!!  ha ha

Have you ever tried putting connectors on both ends of a 500' box and seeing
what happens? I've not tried it, any takers?

nathan
---------------------------------------------------
PLUG-discuss mailing list - PLUG-discuss at lists.plug.phoenix.az.us
To subscribe, unsubscribe, or to change your mail settings:
http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss