Problem compiling Broadcom 440x drivers for open Solaris

[Al Tobey]

Does the driver load with the add_drv.sh script bundled with the
source?    The installation process is usually really simple,
something like (assuming it's called bfe) "cp bfe
/usr/kernel/drv/amd64 ; cp bfe.conf /usr/kernel/drv ; update_drv bfe".

-Al

On Sun, Apr 5, 2009 at 4:15 PM, Bryan O'Neal <boneal at cornerstonehome.com> wrote:
> There is no "make" in the working directory. I did check that, and even if I
> didn't running gcc and suncc from their full bin paths would have accounted
> for it. :( Also the files look fine under VIM; at least to me it looks fine.
> I downloaded the tar.gz file from the server using Ubuntu and copied using a
> flash drive but untared/ziped on the sun box so their should be no windows
> contaminates on my end.
>
> I had actually gone down that road of though already, but thank you for the
> suggestions. Some times the most obvious issue is the one that takes you
> days to find.
>
> -----Original Message-----
> From: plug-discuss-bounces at lists.plug.phoenix.az.us
> [mailto:plug-discuss-bounces at lists.plug.phoenix.az.us] On Behalf Of Bob
> Elzer
> Sent: Sunday, April 05, 2009 3:50 PM
> To: 'Main PLUG discussion list'
> Subject: RE: Problem compiling Broadcom 440x drivers for open Solaris
>
> Make sure (lol) that you don't have a file in the current directory named
> "make"
>
> Also sometime the files may have cr/lf in them which cause problems, this
> happens if the file came from a dos/win environment.
>
> check your makefile
>
>
>
> -----Original Message-----
> From: plug-discuss-bounces at lists.plug.phoenix.az.us
> [mailto:plug-discuss-bounces at lists.plug.phoenix.az.us] On Behalf Of Bryan
> O'Neal
> Sent: Sunday, April 05, 2009 2:49 PM
> To: 'Main PLUG discussion list'
> Subject: Problem compiling Broadcom 440x drivers for open Solaris
>
> I installed Open Solaris on my Dell Inspiron 6000 notebook, however the
> Broadcom 440x integrated nic card is not supported.
> I found the following link
> http://www.sun.com/bigadmin/hcl/data/components/details/363.html
> <http://www.sun.com/bigadmin/hcl/data/components/details/363.html>  which
> leads me to a driver pack, which provides a set of instructions that
> basically boiled down to #make #make install however make does not compile
> anything.
> make reports Fatal error: No arguments to build. make Makefile reports
> Makefile is uptodate. And of course, since I can not make I am not surprised
> when make install reports Don't know how to make target 'install'
>
> I have gotten so used to
>        #./config <arguments>
>        #make
>        #make install
> over the last decade that I have lost the trouble shooting talent for this
> sort of thing. I have tried with gcc and suncc but I get the same issue both
> times. There is no actual configure script since the make files come predone
> for a dozen different platforms/os/compiler combos that are supported; you
> just simlink to the rite one and go.
>
>
> Suggestions?
>
>
>
> Bryan O'Neal
> O'Neal & Associates
> Phone: (602) 295-4356
> Fax:     (602) 795-6050
> E-Mail: Bryan.ONeal at TheONealAndAssociates.com
>
>
> Blogger <http://twitter.com/BryanONeal> Twitter
> <http://mlwtech.blogspot.com/> Linkedin
> <http://www.linkedin.com/in/thebryanoneal>
>
>
>
>
>
>
> ---------------------------------------------------
> PLUG-discuss mailing list - PLUG-discuss at lists.plug.phoenix.az.us
> To subscribe, unsubscribe, or to change your mail settings:
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>
> ---------------------------------------------------
> PLUG-discuss mailing list - PLUG-discuss at lists.plug.phoenix.az.us
> To subscribe, unsubscribe, or to change your mail settings:
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>
> ---------------------------------------------------
> PLUG-discuss mailing list - PLUG-discuss at lists.plug.phoenix.az.us
> To subscribe, unsubscribe, or to change your mail settings:
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>