asterisk: forward disconnect and Cox

[JD]

Asterisk is cool!
If you're going all voip you don't need pstn hardware.

Sangoma and rhino cards are usually  less expensive and have built in echo cancellation.
The x100p cards aren't  very good; get tdm400 card if you go digium.

As far as ip phones...polycom, aastra, snom are good; grandstream 2000 is ok; stay away from grandstream budget phones.
JD

--
sent from phone

-----Original Message-----
From: chip33az at netscape.net
To: "Main PLUG discussion list" <plug-discuss at lists.plug.phoenix.az.us>
Sent: 9/26/07 7:51 AM
Subject: Re: asterisk: forward disconnect and Cox

I will be looking into Asterisk very shortly as my company will no 
longer pay for my home office phone line.  I have Vonage now and like 
it, but it costs more than I use.  I'm thinking of going with VoicePulse 
for the long distance/phone service.

Have you looked at the actual digium cards?  They sell for about $140, 
but are supposed to be the best out there.

PLUGd at LuftHans.com wrote:
> moin moin,
>
> still trying to get Asterisk working in my spare nanoseconds.
>
> I found documentation suggestion I verify that "disconnect supervision"
> aka "forward disconnect" is enabled.
>
> I hadn't realized we have Cox phone service rather than Qwest. Sorry for
> not having that info on previous emails.
>
> Just talked to phone tech support at Cox ( after getting Internet tech
> support twice and being disconnected ). The person was nice, patient and
> appeared to be willing to help out. She didn't know what "disconnect
> supervision" or "forward disconnect" were, so put me on hold to talk to
> internal tech support.
>
> The response she got was that my answering device isn't compatable with
> Cox phone service :(.
>
> Does having service via Cox rather than Qwest change what I need to do to
> get Asterisk to recognize call initiation and termination? Asterisk
> doesn't recognize hangups and ties up the line for long periods of time.
> Some might see this as a bonus :).
>
> Do I need to call it something else when asking for support from Cox?
>
> Any recommendations for a card that actually works? I want to connect to a
> POTS line for receiving and initiating phone calls. I want the possibility
> of that POTS line to be whatever source of POTS lines we get in the
> Phoenix area.
>
> I also want to ring through the phone card to a phone.
>
> I also want to use a small Sipura SIP box that has 2 RJ11 connectors and
> can handle two phones.
>
> There are many other things I want to do, but that's the initial setup. If
> I can get that working such that I don't break it with further
> experimentation I can play with Asterisk.
>
> ciao,
>
> der.hans
>   

---------------------------------------------------
PLUG-discuss mailing list - PLUG-discuss at lists.plug.phoenix.az.us
To subscribe, unsubscribe, or to change your mail settings:
http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss