Networking question

Thomas Cameron plug-discuss@lists.plug.phoenix.az.us
Sun, 8 Jun 2003 22:55:38 -0500


I assume you mean that it is a switch feeding four hubs (as in one hub on
each floor with a home run back to the switch).  If that is the case, you
will get 10 MB/s from the switch to each hub.  The traffic on each hub
(often called a collision domain) will vary based on traffic (i.e.
collisions).  But every cable plugged into the switch will have a max speed
of 10MB/s.

Regards,
Thomas Cameron, RHCE, CNE, MCSE, MCT
Cameron Technical Services, Inc.
http://www.camerontech.com/


----- Original Message ----- 
From: "Robert Wultsch" <robert.wultsch@asu.edu>
To: <plug-discuss@lists.plug.phoenix.az.us>
Sent: Sunday, June 08, 2003 9:36 PM
Subject: Networking question


> Here is a question for all of you networking wizards:
>
> Cisco test question:  If you have a switch running half-duplex at 10Mbg
> connected to four hubs what is the speed of each segment to the hubs.
>
> ---------------------------------------------------
> PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
> To subscribe, unsubscribe, or to change  you mail settings:
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>