Qwest/Actiontec/Cisco/Server issues
Don Calfa
plug-discuss@lists.plug.phoenix.az.us
Thu, 02 Jan 2003 06:07:40 -0700
I'm sure you have but have you tried the 192.168.0.1 address? Worst
case you could find a windows machine and run the CD.
klsmith wrote:
>>Date: Wed, 01 Jan 2003 19:51:11 -0700
>>From: Don Calfa <tvat3000@netscape.net>
>>To: plug-discuss@lists.plug.phoenix.az.us
>>Subject: Re: PLUG-discuss digest, Vol 1 #3149 - 13 msgs
>>Reply-To: plug-discuss@lists.plug.phoenix.az.us
>>
>>I changed the default 192.168.0.1 of the gateway to 10.0.0.1. easier to
>>type and subnet for experiments.
>>
>>I have:
>>No services blocked
>>No website blocking
>>L2TP is off
>>Remote management is off. As long as you're within your internal
>>network, the external IP will work. If this is on, you can acces this
>>from the outside.
>>
>>
>
>Okay I'm the same.
>
>
>
>
>>Port fowarding - I have a slew of addresses going to multiple servers.
>> Listed as 80-80 to 10.0.0.20, 20-23 to 10.0.0.10, 8080-8080 to
>>
>>
>
>
>
>
>
>>10.0.0.30, etc...
>>DMZ is off right now but it does work when I used it for ILS temporarily.
>>
>>
>
>
>
>
>>MAC address is default
>>NAT is on
>>Static routes:
>>10.0.0.10/255.255.255.0,10.0.0.1
>>10.0.0.20/255.255.255.0,10,0,0,1
>>etc...
>>
>>
>
>I'm not sure about this one.
>
>
>
>>I have a static IP but I obtain it through PPPoA and I'm not using the
>>wireless feature since I plan on returning it back to Qwest after the
>>contract.
>>
>>
>>Hope this helps.
>>
>>
>>
>
>Seems I "was" configured properly.
>
>I went to the actiontec site and found what they called the QWest firmware
>1.60.0.49. Thinking there might be a bug. I did the upgrade - which was
>actually moving backwords given the release date. All went well according
>to the feedback.
>
>Now I can not access the actiontec. It appears dead.
>
>Anyone have an idea? I know with the Cisco one could get into debug mode
>and fix the malconfigured image, however this was through serial.
>
>Thanks in advance for any help.
>
>Keith
>
>
>
>>klsmith wrote:
>>
>>
>>
>>>Hello Don,
>>>
>>>Thank you for your help.
>>>
>>>
>>>
>>>
>>>
>>>>Date: Wed, 01 Jan 2003 18:09:23 -0700
>>>>From: Don Calfa <tvat3000@netscape.net>
>>>>To: plug-discuss@lists.plug.phoenix.az.us
>>>>Subject: Re: Qwest/Actiontec/Cisco/Server issues
>>>>Reply-To: plug-discuss@lists.plug.phoenix.az.us
>>>>
>>>>I have the ActionTec 1520 and don' t have a problem with it. I'm
>>>>actually using 2 servers accessible behind it.
>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>>
>>>>You have to set up NAT,
>>>>
>>>>
>>>>
>>>>
>>>My static IP is 66.192.159.4 which I entered undet the basic setup.
>>>
>>>NAT is "on".
>>>
>>>Under advanced setup > Port Forwarding I tried:
>>>
>>>Port 80-80 both 10.0.0.100 (my server's address) I've changed the gateway
>>>
>>>
>to
>
>
>>>10.0.0.1.
>>>
>>>I did a save restart.
>>>
>>>when I try to browse to my url of http://www.akscomputers.com/ I get the
>>>Actiontec setup web page.
>>>
>>>What am I missing?
>>>
>>>
>>>
>>>
>>>
>>>>Static addresses, and the ports you want forwarded.
>>>>
>>>>My firmware is 1.60.0.49
>>>>
>>>>
>>>>
>>>>
>>>>
>>>I'm running 1.60.10.0.30b-R1520SU
>>>
>>>It was 1.60.10.0.30-R1520SU when it arrived Monday.
>>>
>>><SNIP>
>>>
>>>
>>>
>>>
>>>
>>>>>Qwest sent an Actiontec 1520 as a replacement.
>>>>>
>>>>>History:
>>>>>
>>>>>1) Tried to get the Actiontec to do port forwarding - does not appear
>>>>>
>>>>>
>to
>
>
>>>>>work.
>>>>>2) Searched internet and found dozens of posts about this problem.
>>>>>Suggested solution was firmware upgrade.
>>>>>3) Firmware upgraded.
>>>>>4) Still unable to get port forwarding to work.
>>>>>
>>>>>
>>>>>
>>>>>
>>><SNIP>
>>>
>>>
>>>
>
>---------------------------------------------------
>PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
>To subscribe, unsubscribe, or to change you mail settings:
>http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>
>
>
--
Your favorite stores, helpful shopping tools and great gift ideas.
Experience the convenience of buying online with Shop@Netscape!
http://shopnow.netscape.com/