eth0 not working [Resent after 8hrs]

[MG]

Bryce,

What distribution are you running? If MDK9.1 Take a look at this:
http://archives.mandrakelinux.com/newbie/2003-02/msg03519.php
I see that hotplugging is enabled in your config file under #general setup

Mike



On Sunday 06 April 2003 08:15 am, you wrote:
> Here's the kernel config.
>
> Quoting "Bryce C." <Plug@BryceCo.Net>:
> > It's a Netgear FA310TX that's using the tulip module compiled-in to the
> > kernel.
> >  I don't htink it's going to work but I'm going to try taking iptables
> > out of
> > the kernel entirely.
> >
> > Quoting Kevin Brown <kevin_brown@qwest.net>:
> > > Bryce C. wrote:
> > > > It may be because it's late but I can not for the life of me get eth0
> > > > talking to
> > > > anything.  It works under gentoo's livecd and it worked before then
> > > > in all the
> > > > other distros I ran.  I can even restart to the livecd and it works.
> > > > In dmesg, I
> > > > get alot of net watchdog: eth0 transmit timeout but also mii-tool
> > > > does negotiate
> > > > (successfully) with the switch.
> > >
> > > What module is the Gentoo LiveCD loading to work with that card?  I had
> >
> > this
> >
> > > issue with an Intel 10/100/1000 card that I had to download the driver
> > > from
> > >
> > > Intel's site and then after completing the step to build the kernel,
> > > built the
> > > driver and then it would work.
> > >
> > >
> > > ---------------------------------------------------
> > > PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
> > > To subscribe, unsubscribe, or to change  you mail settings:
> > > http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
> >
> > ---------------------------------------------------
> > PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
> > To subscribe, unsubscribe, or to change  you mail settings:
> > http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss