New install NIC problem

[Mark Berkwitt]

Hans, how've  you been?
When you say to
> Change eth0 to eth1 and vice versa in the config files and restart
> networking.
do you mean to change the file names, or swap the contents? I suppose it
wouldn't matter but for the DEVICE=eth0 statement. Would you also change
just the DEVICE=eth0 statement as well?
What if the file name and the DEVICE=eth0 statement contradict eachother,
just curious. :)

BTW, I think I know why starting up the IP of the added nic failed. When I
installed, there was only one nic. The firewall config when listing "allow
incoming" only had SSH checked.
I realized this when I did the reinstall with 2 nics and both DHCP and SSH
were checked. Ooops. I guess I didn't really need to reinstall afterall.



> -----Original Message-----
> From: plug-discuss-admin@lists.plug.phoenix.az.us
> [mailto:plug-discuss-admin@lists.plug.phoenix.az.us]On Behalf Of
> der.hans
> Sent: Friday, September 13, 2002 12:15 AM
> To: plug-discuss@lists.plug.phoenix.az.us
> Subject: RE: New install NIC problem
>
>
> Am 12. Sep, 2002 schwätzte Mark Berkwitt so:
>
> > Please look at a previous post (in this thread) of mine where I
> list what's
> > in
> > /etc/sysconfig/network-scripts/ifcfg-eth0   and
> > /etc/sysconfig/network-scripts/ifcfg-eth1
> >
> > To be honest, I wouldn't know where or what to look for to see
> if pump is
> > being used.
>
> Change eth0 to eth1 and vice versa in the config files and restart
> networking.
>
> ps auxwww | grep pump
>
> > Could you please tell me how to
> > > change to use dhcpcd or dhclient rather than pump.?
> > Sorry for the remedial type questions.
>
> Remove pump and add one of those packages. Anyone who uses RH
> wanna suggest
> which way to go? Mark doesn't currently have a Net connection due to this
> problem, just to make it more of a challenge :).
>
> ciao,
>
> der.hans
> --
> #  https://www.LuftHans.com/    http://www.TOLISGroup.com/
> #  I chose to use the kernel sources as my documentation.  ;-)
> #  -- Kevin Buettner
>
> -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
> PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
> To subscribe, unsubscribe, or to change  you mail settings:
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>