Re: Adding a third IDE drive in Linux
Sundar Narayanasamy
plug-discuss@lists.plug.phoenix.az.us
Sun, 5 May 2002 19:41:53 -0700 (MST)
Thanks, Matt. I hadn't set the CDROM to slave.
-Sundar
> Is the CDROM on bus 1 set to Slave? What have you tried that leads you
> to believe the system doesn't see the new drive? You might also check
> your BIOS settings to make sure the drive is accessible.
> ~M
>
>
> On Sat, 4 May 2002, Sundar Narayanasamy wrote:
>
>> I added the hard drive(40G IDE) to my home server(RedHat 7.1). The
>> server already had two(6G and Original 2.5G) IDEs on Bus 0 and CD ROM
>> on bus 1, so I added the new drive as a master on bus 1. The problem
>> is system doesn't seem to see the new hard drive.
>>
>> Sundar
>>
>> "A man is only as big as the dreams he dares to live"
>>
>>
>>
>> > Am 03. May, 2002 schwätzte sundar so:
>> >
>> >> I want to add a third IDE drive to my home server. It's a old Sony
>> >> PCV-70. Are there any good How-tos you could refer me to.
>> >
>> > ide bus 0 master is /dev/hda
>> > ide bus 0 slave is /dev/hdb
>> > ide bus 1 master is /dev/hdc
>> > ide bus 1 slave is /dev/hdd
>> >
>> > On normal x86 box bus 0 is primary ide and bus 1 is secondary ide.
>> >
>> > Normally your original hard drive should be hda. Your CD will be hdb
>> > if it's on the same cable as the primary hard drive or hdc if it's
>> > by itself on the secondary ide bus.
>> >
>> > If you have two items on an ide cable use the jumpers to set one to
>> > master and the other to slave. I think you might be able to set them
>> > both to select ( or something like that ) if they're new enough.
>> >
>> > Look at www.LinuxDoc.org for HOWTOs. There are plenty. There should
>> > be one that covers ide hardware setup.
>> >
>> > ciao,
>> >
>> > der.hans
>> > --
>> > # https://www.LuftHans.com/
>> > # I've got a photographic memory,
>> > # but I'm lousy photographer. - der.hans
>> >
>> > ________________________________________________
>> > See http://PLUG.phoenix.az.us/navigator-mail.shtml if your mail
>> > doesn't post to the list quickly and you use Netscape to write mail.
>> >
>> > PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
>> > http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>>
>>
>> ________________________________________________
>> See http://PLUG.phoenix.az.us/navigator-mail.shtml if your mail
>> doesn't post to the list quickly and you use Netscape to write mail.
>>
>> PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
>> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>>
>
> ________________________________________________
> See http://PLUG.phoenix.az.us/navigator-mail.shtml if your mail doesn't
> post to the list quickly and you use Netscape to write mail.
>
> PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss