Help with routing

[Armand]

Hi group,

I need help with my /etc/route.conf file.

I'm using the 2.4 kernel with SNAT and 3 NIC's - one for the gateway,
one for the intranet and one for DMZ.

eth0 has a static cable connection with an IP address of 24.116.64.118
but I'm letting it use dhcpcd to connect, it's just assigns
24.116.64.118 every time and I can use irc and ping out.
eth1 is 192.168.100.1 - internal
eht2 is 172.16.50.1 - DMZ	

I just went with these values because they match with the example bind
config files that come with SuSE 7.1
This is what I have so far:

# Destination	Dummy/Gateway	Netmask			Device
#
127.0.0.0	0.0.0.0		255.255.255.0		lo
24.116.64.0	0.0.0.0		255.255.254.0		eth0
# The above was generated by the default installation, it works, I added
the below
192.116.100.1	0.0.0.0		255.255.255.255		eth1
172.16.50.1	0.0.0.0		255.255.255.255		eth2
# Gateway
0.0.0.0		192.116.100.1
0.0.0.0		172.16.50.1
# Host behind a Gateway
24.116.64.118	24.116.64.1	255.255.255.255
# Net behind a Gateway
192.116.100.1	24.116.64.118
172.16.50.1	24.116.64.118

TIA,
Armand