Lilo Issues

[Brian Cluff]

I might be totally wrong on this, but if I remember correctly there are a
lot of scsi controllers that will only boot off of the first 2 devices.
Other than that, everything you got in your lilo looks a-ok.  Try swapping
your sdb and sda and see if you are able to boot after that.

Brian Cluff
----- Original Message -----
> If anyone knows anything about lilo, any info would be much
> appreciated...
> I have a debian potato system with two 9 gig scsi drives (sda and sdb)
> I have another machine with 98 loaded on it, that I would like to put in
> to the debian machine and just make it dual boot.
> I put the win98 drive in the debian machine on scsi id3 (sdc) and change
> lilo.conf to read this:
> boot=/dev/sda1
> prompt
> timeout=50
> root=/dev/sda1
> install=/boot/boot.b
> map=/boot/map
> vga=normal
> delay=20
> image=/vmlinuz
>     label=Linux
>     read-only
> other=/dev/sdc1
>     label=98
>     table=/dev/sdc
>
> To which I receive that partition 0x82 may not be bootable
> and on reboot I choose 98 to have it kick out a message that I have an
> invalid system disk...
> Is there something that I am missing?
>
>
>
> -- Todd Hought
> thought@scuddertech.ws
> AIM - SupahVee
> ICQ - 3024630
>
>
>
>
>
> ________________________________________________
> See http://PLUG.phoenix.az.us/navigator-mail.shtml if your mail doesn't
post to the list quickly and you use Netscape to write mail.
>
> Plug-discuss mailing list  -  Plug-discuss@lists.PLUG.phoenix.az.us
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss