Linux as a DHCP client for Cox @ home
Hawke
proudhawk19021@home.com
Wed, 13 Dec 2000 21:24:22 +0000
try this on a COSOLE only:
dhcpcd -h cx1139855-b
and thats all you should need (unless your main ethernet card is
something other than eth0).
I use it here and it works....
"Smith, Stephen P (AZ75)" wrote:
>
> Ok, I tried using my host name and it failed. The applicable code looks
> like
>
> if /sbin/dhcpcd -h cx1139855-b eth1
> then
> echo "done."
> else
> echo "failed."
> fi
>
> That should work, correct? If it works, then I should see eth1 when running
> ifconfig - correct?
>
> Stephen
>
> -----Original Message-----
> From: Hawke [mailto:proudhawk19021@home.com]
> Sent: Tuesday, December 12, 2000 9:57 AM
> To: plug-discuss@lists.PLUG.phoenix.az.us
> Subject: Re: Linux as a DHCP client for Cox @ home
>
> I am.
> first of all, you have to make sure that yiur firewall (if you are
> using one) doesn't block the DHCP broadcasts.
>
> Secondly,
> to use dhcp (or pump) you must issue the command like so:
> dhcpcd -h <your hostname here>
>
> I use: dhcpcd -h cx358876-c
>
> it generally takes a couple of minutes, but then it comes right up.
> some of the startuo scripts may have thissetup (but knowing redhat
> I rather doubt it).
>
> If this doesn't work for you, then I'm at a loss.
>
> Hawke
>
> "Smith, Stephen P (AZ75)" wrote:
> >
> > Ok, I have Red Hat 7.0 installed on my system at home ( AMD 486 clone
> 133MHz
> > - real ancient). I have the two nic cards up and running and now want to
> > convert one of them to a DHCP client.
> >
> > My notebook (SONY Pentium II) is currently set up to dynamically get the
> IP
> > settings. I have the machine name COX wants me to use.
> >
> > At this point I have tried connecting the AMD to the cable modem, set the
> > nic to DHCP and then rebooting - no dice.
> >
> > Is anyone out there using COX, Linux and DHCP?
> >
> > Stephen
> >
>
> ________________________________________________
> See http://PLUG.phoenix.az.us/navigator-mail.shtml if your mail doesn't post to the list quickly and you use Netscape to write mail.
>
> Plug-discuss mailing list - Plug-discuss@lists.PLUG.phoenix.az.us
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
--
Make a few extra $$$.
Join http://www.processtree.com/?sponsor=29027
I will not be pushed, filed, stamped, indexed, briefed, debriefed, or
numbered!
My life is my own - No. 6