Well,
lmsensors will allow you too look at the temp of your CPU. If you are idling and the temp is say 30 degrees normally, and all the sudden you see the temp spike to 70 and a reboot happens, check your heatsink. If the proc is really 70c, you should not be able to get close to your heatsink without feeling heat. If you have an IR thermometer, point that at you heatsink and take a temp reading. If it is above ~50, you may have a real heat issue. If it is not, you may have a sensor on the board or cpu that went bad as reporting a bad temp causing a reboot/shutdown because of thermal emergency.
Mac
Michael wrote on 11/1/19 3:15 PM:
Interesting. So how do I check the sensor? How do I fix it?
On Sat, Oct 26, 2019 at 12:27 AM Donald Mac McCarthy <mac@oscontext.com> wrote:It is starting to sound like a thermal issue. And possibly not an actual thermal issue, but a sensor issue.
Mac
Michael wrote on 10/25/19 7:24 PM:
No, I didn't. Oh well....
On Fri, Oct 25, 2019 at 7:25 PM Donald Mac McCarthy <mac@oscontext.com> wrote:Mike, I am sorry that I din not get you a quick reply. I have been traveling a lot and was not frequently checking my plug folders. Did you figure this one out. I see there was some follow-up discussion with the rest of the list.
Best,
Mac
Michael wrote on 10/19/19 4:20 PM:
apparently some guy had a similar problem and this is what he said:
This command shows that my system came up with a new kernel. Ubuntu 12.04 64 bit. 3.2.0-63 after reboot, 3.2.0-61 before
– Antonios Hadjigeorgalis May 26 '14 at 14:20
4
This led me to checking etc/apt/apt.conf.d/50unattended-upgrades I had set Unattended-Upgrade::Automatic-Reboot "true"; I changed it back to the default setting of false.
– Antonios Hadjigeorgalis May 26 '14 at 15:31
found- https://askubuntu.com/questions/202335/ ... om-reboots
but there was no 'unattended upgrades' line in /etc/apt/apt.conf.d/
On Sat, Oct 19, 2019 at 9:04 AM Michael <bmike1@gmail.com> wrote:darn....... it just rebooted on its own. lovely:( well, it was fixed for fourteen days at least.On Wed, Oct 9, 2019 at 1:07 PM Michael <bmike1@gmail.com> wrote:Ok, thanks.On Sat, Oct 5, 2019 at 11:26 PM Donald Mac McCarthy <mac@oscontext.com> wrote:CLI CDRW is not something that I have done - I can't remember the burner software I used. I told it the ISO and it burned and closed the disc. I am travelling at the moment, so when I get home I will look. As for the nomenclature of the device, in RHEL land it is usually labelled as /dev/cdrom{0-9}
Mac
Michael wrote on 10/5/19 6:54 PM:
also what is the rw listed as? /dev/sdc? if that is so I would issue the command 'sudo dd if=memtest86-usb.img of=/dev/sdc'.... right?
On Sat, Oct 5, 2019 at 9:34 PM Michael <bmike1@gmail.com> wrote:well.... it seems blowing it fixed it. thank goodness! my cdrom is not working and I don't recall if it boots to the USBCDRW. I seem to remember that it was booting from a thumb drive last year (if I remember correctly).... or was it the USBCDRW.... hmmmmm..... hey ET... how do I write the image to the usbcdrw?On Fri, Oct 4, 2019 at 11:12 PM Donald Mac McCarthy <mac@oscontext.com> wrote:I have had that happen before when a BIOS only partially supports boot from USB. Have you booted from USB on that system before?
Do you have a CD you could burn the iso to and try. That sounds so... old fashioned, but I have a couple of 10 yr old dell workstations that don't properly USB boot that I used before I discovered I could replace them with a couple of RasPis.
Mac
Michael wrote on 10/3/19 3:47 PM:
Yepers.... just notes.
On Thu, Oct 3, 2019 at 12:03 PM Stephen Partington <cryptworks@gmail.com> wrote:No, just notes. at least from the looks of them.On Thu, Oct 3, 2019 at 8:05 AM Bob Elzer <bob.elzer@gmail.com> wrote:Are those your passwords on the sticky notes?---------------------------------------------------On Wed, Oct 2, 2019, 4:53 PM Michael <bmike1@gmail.com> wrote:what a mess my computer desk isOn Wed, Oct 2, 2019 at 7:50 PM Michael <bmike1@gmail.com> wrote:On Wed, Oct 2, 2019 at 4:36 PM <kitepilot@kitepilot.com> wrote:> what do you advise I do...
Call Geek Squad? 8)
Can you send me a picture of the screen you get?
Memetest is (or was) prtty straight forward.
Even *I* could use it! ;-)
ET
Michael writes:
> Okay e t I bought a USB drive and ran the command 2 put the memtest on it
> but when I boot it gets to verifying DMI pool and just sits . I've had a
> going for about 15 minutes and nothing's happened what do you advise I do
>
> On Tue, Oct 1, 2019, 6:38 AM <kitepilot@kitepilot.com> wrote:
>
>> You only need 500MG.
>> A USB HD that size will be cheaper than the can of air.
>> Buy one too!
>> ET
>>
>>
>> Michael writes:
>>
>> > all the fans are working. I'll try the memtest.... I don't have a spare
>> usb
>> > drive large enough.....
>> > $ sudo dd if=memtest86-usb.img of=/dev/sdc
>> > dd: writing to '/dev/sdc': No space left on device
>> > 128001+0 records in
>> > 128000+0 records out
>> > 65536000 bytes (66 MB, 62 MiB) copied, 21.5638 s, 3.0 MB/s
>> > bmike1@MikesBeast:/tmp$
>> > I'll take care of it tomorrow
>> >
>> >
>> > On Mon, Sep 30, 2019 at 1:48 PM <kitepilot@kitepilot.com> wrote:
>> >
>> >> I agree that heat is a big suspect, but it could also be some creative
>> >> video
>> >> driver or a bad memory.
>> >> Give memtest a try:
>> >> https://www.memtest86.com/downloads/memtest86-usb.zip
>> >> ET
>> >>
>> >>
>> >> Matthew Crews writes:
>> >>
>> >> > On 9/28/19 4:31 PM, Michael wrote:
>> >> >> Thank you so much for the help I really truly appreciate it.
>> >> >
>> >> > No problem, its what we are here for.
>> >> >
>> >> >> Does it reboot while you are using it? Are you using very
>> intensive
>> >> >> applications on it, or very not-intensive applications?
>> >> >>
>> >> >>
>> >> >> So far it has only only reboot. after I load Chrome. And it doesn't
>> >> >> happen all the time usually it will load the Chrome and it will
>> reboot
>> >> >> then open it again and then it will be fine.
>> >> >
>> >> > Chrome is notoriously resource intensive. Maybe give Chromium or
>> Firefox
>> >> > a try.
>> >> >
>> >> > But based on that answer I'm leaning towards a fan failure first. As
>> you
>> >> > said you are currently in Miami, so when you get back definitely check
>> >> that.
>> >> >
>> >> > Could also be simple dust accumulation, something a can of air can
>> fix.
>> >> > That is something that is obvious to see when you look.
>> >> >
>> >> > There are a few other possible things to check, but lets rule out the
>> >> > simple stuff first before we dive deeper.
>> >> >
>> >> > -Matt
>> >> >
>> >> ---------------------------------------------------
>> >> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org
>> >> To subscribe, unsubscribe, or to change your mail settings:
>> >> https://lists.phxlinux.org/mailman/listinfo/plug-discuss
>> >
>> >
>> >
>> > --
>> > :-)~MIKE~(-:
>> ---------------------------------------------------
>> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org
>> To subscribe, unsubscribe, or to change your mail settings:
>> https://lists.phxlinux.org/mailman/listinfo/plug-discuss
---------------------------------------------------
PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org
To subscribe, unsubscribe, or to change your mail settings:
https://lists.phxlinux.org/mailman/listinfo/plug-discuss--:-)~MIKE~(-:-----------------------------------------------------:-)~MIKE~(-:
PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org
To subscribe, unsubscribe, or to change your mail settings:
https://lists.phxlinux.org/mailman/listinfo/plug-discuss
PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org
To subscribe, unsubscribe, or to change your mail settings:
https://lists.phxlinux.org/mailman/listinfo/plug-discuss--A mouse trap, placed on top of your alarm clock, will prevent you from rolling over and going back to sleep after you hit the snooze button.---------------------------------------------------
Stephen
PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org
To subscribe, unsubscribe, or to change your mail settings:
https://lists.phxlinux.org/mailman/listinfo/plug-discuss
--
:-)~MIKE~(-:
--------------------------------------------------- PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org To subscribe, unsubscribe, or to change your mail settings: https://lists.phxlinux.org/mailman/listinfo/plug-discuss
--:-)~MIKE~(-:
--
:-)~MIKE~(-:
--:-)~MIKE~(-:--:-)~MIKE~(-:
--
:-)~MIKE~(-:
--
Sent from Postbox
--
:-)~MIKE~(-:
--
Sent from Postbox
--
:-)~MIKE~(-:
--
Sent from Postbox