I'm just about to take a reading and then run stress again. It is pretty coo, in here so not sure if a fan would do any good. $ sensors radeon-pci-0100 Adapter: PCI adapter temp1: +74.5°C k10temp-pci-00c3 Adapter: PCI adapter temp1: +51.6°C (high = +70.0°C) (crit = +72.0°C, hyst = +70.0°C) want me to crash it now? On Mon, Oct 30, 2017 at 8:30 PM, Brien Dieterle wrote: > Well, those temperatures are not that hot, but that doesn't mean some > cooling wouldn't improve things. > Have you popped the case off and pointed a big fan in there and tried to > reproduce the crash yet? > > On Mon, Oct 30, 2017 at 5:21 PM, Michael wrote: > >> Here is around 180 seconds of readings at around 10 second intervals (if >> it helps): >> >> $ sensors >> radeon-pci-0100 >> Adapter: PCI adapter >> temp1: +74.5°C >> >> k10temp-pci-00c3 >> Adapter: PCI adapter >> temp1: +51.5°C (high = +70.0°C) >> (crit = +72.0°C, hyst = +70.0°C) >> >> bmike1@MikesBeast ~ $ sensors >> radeon-pci-0100 >> Adapter: PCI adapter >> temp1: +75.5°C >> >> k10temp-pci-00c3 >> Adapter: PCI adapter >> temp1: +51.0°C (high = +70.0°C) >> (crit = +72.0°C, hyst = +70.0°C) >> >> bmike1@MikesBeast ~ $ sensors >> radeon-pci-0100 >> Adapter: PCI adapter >> temp1: +75.5°C >> >> k10temp-pci-00c3 >> Adapter: PCI adapter >> temp1: +51.0°C (high = +70.0°C) >> (crit = +72.0°C, hyst = +70.0°C) >> >> bmike1@MikesBeast ~ $ sensors >> radeon-pci-0100 >> Adapter: PCI adapter >> temp1: +75.5°C >> >> k10temp-pci-00c3 >> Adapter: PCI adapter >> temp1: +51.4°C (high = +70.0°C) >> (crit = +72.0°C, hyst = +70.0°C) >> >> bmike1@MikesBeast ~ $ sensors >> radeon-pci-0100 >> Adapter: PCI adapter >> temp1: +75.0°C >> >> k10temp-pci-00c3 >> Adapter: PCI adapter >> temp1: +51.2°C (high = +70.0°C) >> (crit = +72.0°C, hyst = +70.0°C) >> >> bmike1@MikesBeast ~ $ sensors >> radeon-pci-0100 >> Adapter: PCI adapter >> temp1: +75.5°C >> >> k10temp-pci-00c3 >> Adapter: PCI adapter >> temp1: +51.0°C (high = +70.0°C) >> (crit = +72.0°C, hyst = +70.0°C) >> >> bmike1@MikesBeast ~ $ sensors >> radeon-pci-0100 >> Adapter: PCI adapter >> temp1: +75.5°C >> >> k10temp-pci-00c3 >> Adapter: PCI adapter >> temp1: +51.5°C (high = +70.0°C) >> (crit = +72.0°C, hyst = +70.0°C) >> >> bmike1@MikesBeast ~ $ sensors >> radeon-pci-0100 >> Adapter: PCI adapter >> temp1: +75.0°C >> >> k10temp-pci-00c3 >> Adapter: PCI adapter >> temp1: +50.9°C (high = +70.0°C) >> (crit = +72.0°C, hyst = +70.0°C) >> >> bmike1@MikesBeast ~ $ sensors >> radeon-pci-0100 >> Adapter: PCI adapter >> temp1: +75.5°C >> >> k10temp-pci-00c3 >> Adapter: PCI adapter >> temp1: +53.6°C (high = +70.0°C) >> (crit = +72.0°C, hyst = +70.0°C) >> >> bmike1@MikesBeast ~ $ sensors >> radeon-pci-0100 >> Adapter: PCI adapter >> temp1: +75.0°C >> >> k10temp-pci-00c3 >> Adapter: PCI adapter >> temp1: +52.4°C (high = +70.0°C) >> (crit = +72.0°C, hyst = +70.0°C) >> >> bmike1@MikesBeast ~ $ sensors >> radeon-pci-0100 >> Adapter: PCI adapter >> temp1: +75.0°C >> >> k10temp-pci-00c3 >> Adapter: PCI adapter >> temp1: +51.8°C (high = +70.0°C) >> (crit = +72.0°C, hyst = +70.0°C) >> >> bmike1@MikesBeast ~ $ sensors >> radeon-pci-0100 >> Adapter: PCI adapter >> temp1: +74.5°C >> >> k10temp-pci-00c3 >> Adapter: PCI adapter >> temp1: +51.1°C (high = +70.0°C) >> (crit = +72.0°C, hyst = +70.0°C) >> >> bmike1@MikesBeast ~ $ sensors >> radeon-pci-0100 >> Adapter: PCI adapter >> temp1: +74.5°C >> >> k10temp-pci-00c3 >> Adapter: PCI adapter >> temp1: +51.0°C (high = +70.0°C) >> (crit = +72.0°C, hyst = +70.0°C) >> >> bmike1@MikesBeast ~ $ sensors >> radeon-pci-0100 >> Adapter: PCI adapter >> temp1: +74.5°C >> >> k10temp-pci-00c3 >> Adapter: PCI adapter >> temp1: +52.0°C (high = +70.0°C) >> (crit = +72.0°C, hyst = +70.0°C) >> >> bmike1@MikesBeast ~ $ sensors >> radeon-pci-0100 >> Adapter: PCI adapter >> temp1: +74.0°C >> >> k10temp-pci-00c3 >> Adapter: PCI adapter >> temp1: +50.6°C (high = +70.0°C) >> (crit = +72.0°C, hyst = +70.0°C) >> >> bmike1@MikesBeast ~ $ sensors >> radeon-pci-0100 >> Adapter: PCI adapter >> temp1: +74.5°C >> >> k10temp-pci-00c3 >> Adapter: PCI adapter >> temp1: +51.4°C (high = +70.0°C) >> (crit = +72.0°C, hyst = +70.0°C) >> >> bmike1@MikesBeast ~ $ sensors >> radeon-pci-0100 >> Adapter: PCI adapter >> temp1: +75.0°C >> >> k10temp-pci-00c3 >> Adapter: PCI adapter >> temp1: +51.8°C (high = +70.0°C) >> (crit = +72.0°C, hyst = +70.0°C) >> >> bmike1@MikesBeast ~ $ sensors >> radeon-pci-0100 >> Adapter: PCI adapter >> temp1: +75.0°C >> >> k10temp-pci-00c3 >> Adapter: PCI adapter >> temp1: +51.9°C (high = +70.0°C) >> (crit = +72.0°C, hyst = +70.0°C) >> >> >> On Mon, Oct 30, 2017 at 7:39 PM, Brien Dieterle wrote: >> >>> 30 mins is plenty for a test. Try to get sensors output just before a >>> crash >>> >>> On Mon, Oct 30, 2017 at 4:25 PM, Michael wrote: >>> >>>> how long do you want me to run glmark2 for? Forever is not feasible! >>>> >>>> On Mon, Oct 30, 2017 at 7:22 PM, Michael wrote: >>>> >>>>> as for the shutoff point everything that had anything to do with >>>>> cutting power was already diabled >>>>> >>>>> On Mon, Oct 30, 2017 at 7:20 PM, Michael wrote: >>>>> >>>>>> $ sensors >>>>>> radeon-pci-0100 >>>>>> Adapter: PCI adapter >>>>>> temp1: +68.0°C >>>>>> >>>>>> k10temp-pci-00c3 >>>>>> Adapter: PCI adapter >>>>>> temp1: +45.1°C (high = +70.0°C) >>>>>> (crit = +72.0°C, hyst = +70.0°C) >>>>>> >>>>>> >>>>>> On Mon, Oct 30, 2017 at 7:07 PM, Brien Dieterle >>>>>> wrote: >>>>>> >>>>>>> Well, it might be protecting your computer but if it is too low it >>>>>>> will just be annoying. >>>>>>> You still need to run sensors and get those numbers if you haven't >>>>>>> yet: >>>>>>> >>>>>>> https://askubuntu.com/questions/15832/how-do-i-get-the-cpu-t >>>>>>> emperature >>>>>>> >>>>>>> If your machine is legitimately overheating you need to address that >>>>>>> with fans and ventilation, etc. >>>>>>> >>>>>>> On Mon, Oct 30, 2017 at 3:59 PM, Michael wrote: >>>>>>> >>>>>>>> if there is a shutoff point you did say disable it? >>>>>>>> >>>>>>>> >>>>>>>> On Mon, Oct 30, 2017 at 6:56 PM, Brien Dieterle >>>>>>>> wrote: >>>>>>>> >>>>>>>>> Well, you're on the right track. Try to isolate whether glmark >>>>>>>>> alone can crash it, or if you need stress as well. Then try opening up >>>>>>>>> your case and point a fan in there. >>>>>>>>> Also don't forget to check the BIOS for thermal management events >>>>>>>>> that might be causing the shutdown/reboot. >>>>>>>>> >>>>>>>>> On Mon, Oct 30, 2017 at 3:52 PM, Michael wrote: >>>>>>>>> >>>>>>>>>> never mind..... I ran glmark around 5 minutes and then stress. >>>>>>>>>> that crashed the machine! Not a nice reboot (like what it does with dt) but >>>>>>>>>> a power failure outage, >>>>>>>>>> >>>>>>>>>> On Mon, Oct 30, 2017 at 6:41 PM, Michael >>>>>>>>>> wrote: >>>>>>>>>> >>>>>>>>>>> and if glmark2 doesn't crash it run stress the same amount of >>>>>>>>>>> time? >>>>>>>>>>> >>>>>>>>>>> On Mon, Oct 30, 2017 at 6:37 PM, Michael >>>>>>>>>>> wrote: >>>>>>>>>>> >>>>>>>>>>>> how long do I let glmark2's pretty horse rotate? >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> On Mon, Oct 30, 2017 at 6:36 PM, Michael >>>>>>>>>>>> wrote: >>>>>>>>>>>> >>>>>>>>>>>>> okay >>>>>>>>>>>>> ` >>>>>>>>>>>>> >>>>>>>>>>>>> On Mon, Oct 30, 2017 at 6:10 PM, Brien Dieterle < >>>>>>>>>>>>> briend@gmail.com> wrote: >>>>>>>>>>>>> >>>>>>>>>>>>>> I'd wait. If stress alone doesn't crash, run glmark2 by >>>>>>>>>>>>>> itself. If glmark2 doesn't crash, run them both at the same time. >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Mon, Oct 30, 2017 at 3:01 PM, Michael >>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>>> run this now or after stress completes? >>>>>>>>>>>>>>> ? >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> On Mon, Oct 30, 2017 at 5:59 PM, Brien Dieterle < >>>>>>>>>>>>>>> briend@gmail.com> wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Well, not yet ;-). If it doesn't crash, you might need to >>>>>>>>>>>>>>>> stress the graphics card as well with one of these tools: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> https://www.pcsuggest.com/gpu- >>>>>>>>>>>>>>>> benchmarking-and-stress-testing-in-linux/ >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> So maybe kick off both stress and >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> glmark2 --run-forever >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On Mon, Oct 30, 2017 at 2:55 PM, Michael >>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> if it doesn't crash I'll start hounding the darktable >>>>>>>>>>>>>>>>> forums. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> On Mon, Oct 30, 2017 at 5:45 PM, Michael >>>>>>>>>>>>>>>> > wrote: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Just started..... lets see what happens >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> On Mon, Oct 30, 2017 at 5:36 PM, Brien Dieterle < >>>>>>>>>>>>>>>>>> briend@gmail.com> wrote: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Forget darktable for now. Did you run stress test for >>>>>>>>>>>>>>>>>>> more than 10 seconds? >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> This will run a stress test for 30 minutes: >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> stress --cpu 8 --io 4 --vm 2 --hdd 2 --timeout 1800s >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> If you can get it to crash with just this stress >>>>>>>>>>>>>>>>>>> program, then it has nothing to do with darktable >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> On Mon, Oct 30, 2017 at 2:24 PM, Michael < >>>>>>>>>>>>>>>>>>> bmike1@gmail.com> wrote: >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> I have no sensors running and as for it panicing when >>>>>>>>>>>>>>>>>>>> warm sometimes it panics after I run dt 2 minutes after it had been shut >>>>>>>>>>>>>>>>>>>> down an hour and doesn't panic even though dt had run10 minutes. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> On Mon, Oct 30, 2017 at 4:31 PM, Brien Dieterle < >>>>>>>>>>>>>>>>>>>> briend@gmail.com> wrote: >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Check your bios settings for hardware monitoring and >>>>>>>>>>>>>>>>>>>>> temperature limits. You may have it set with a maximum temperature so the >>>>>>>>>>>>>>>>>>>>> machine panics when it's just warm. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Try raising this number or disabling the feature >>>>>>>>>>>>>>>>>>>>> entirely >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> But first check your sensors by installing a >>>>>>>>>>>>>>>>>>>>> temperature monitoring program >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> On Oct 30, 2017 1:04 PM, "Michael" >>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> it is sooo ify! I just ran it for like 10 minutes >>>>>>>>>>>>>>>>>>>>>> with no crashes whereas before I had just started the computer and ran dt >>>>>>>>>>>>>>>>>>>>>> for 2 minutes and it crashed. Then I restarted and I had a repeat >>>>>>>>>>>>>>>>>>>>>> performance of the 2 minute thing. >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> On Mon, Oct 30, 2017 at 3:38 PM, Michael < >>>>>>>>>>>>>>>>>>>>>> bmike1@gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> $ stress --cpu 8 --io 4 --vm 2 --vm-bytes 128M >>>>>>>>>>>>>>>>>>>>>>> --timeout 10s >>>>>>>>>>>>>>>>>>>>>>> stress: info: [7571] dispatching hogs: 8 cpu, 4 io, >>>>>>>>>>>>>>>>>>>>>>> 2 vm, 0 hdd >>>>>>>>>>>>>>>>>>>>>>> stress: info: [7571] successful run completed in 10s >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> I don't know what that was suppossed to tell me but >>>>>>>>>>>>>>>>>>>>>>> there it is. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> On Mon, Oct 30, 2017 at 3:36 PM, Michael < >>>>>>>>>>>>>>>>>>>>>>> bmike1@gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> I am experiencing no slowness. It is like the days >>>>>>>>>>>>>>>>>>>>>>>> where you had a power switch on the back of your computer... or it is like >>>>>>>>>>>>>>>>>>>>>>>> a hard reboot. >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> On Mon, Oct 30, 2017 at 3:33 PM, Stephen Partington >>>>>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> OpenCL in darktable mainly impacts rendering. it >>>>>>>>>>>>>>>>>>>>>>>>> should have no effect on on system or ram consumption unless you are >>>>>>>>>>>>>>>>>>>>>>>>> experiencing slowness during render cycles. >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Oct 30, 2017 at 12:21 PM, Michael < >>>>>>>>>>>>>>>>>>>>>>>>> bmike1@gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> You know.... I'm having trouble running >>>>>>>>>>>>>>>>>>>>>>>>>> darktable. It seems that after I start it it runs a few minutes and then >>>>>>>>>>>>>>>>>>>>>>>>>> reboots the computer. Probably because I do not have a GPU (I don't think). >>>>>>>>>>>>>>>>>>>>>>>>>> Then I saw this thread and thought that I'd give that a try. So it seems I >>>>>>>>>>>>>>>>>>>>>>>>>> can not run chrome and darktable at the same time. >>>>>>>>>>>>>>>>>>>>>>>>>> ___ >>>>>>>>>>>>>>>>>>>>>>>>>> 'lspci' shows that my graphics card is : >>>>>>>>>>>>>>>>>>>>>>>>>> 01:00.0 VGA compatible controller: Advanced Micro >>>>>>>>>>>>>>>>>>>>>>>>>> Devices, Inc. [AMD/ATI] RV770 [Radeon HD 4850] >>>>>>>>>>>>>>>>>>>>>>>>>> and 'lspci|grep gpu' returned an empty set >>>>>>>>>>>>>>>>>>>>>>>>>> (if I did that correctly) >>>>>>>>>>>>>>>>>>>>>>>>>> so I suppose the cheapest way to fix this is to >>>>>>>>>>>>>>>>>>>>>>>>>> get a gpu.... correct? >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Oct 30, 2017 at 12:09 PM, Carruth, Rusty >>>>>>>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> In my experience, it’s almost always Firefox >>>>>>>>>>>>>>>>>>>>>>>>>>> taking all of memory. (Or Chrome, or whatever web browser you’re using). >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> I agree with Mr B, run top or htop and see >>>>>>>>>>>>>>>>>>>>>>>>>>> what’s, well, on top ;-) >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Rusty >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> [image: SMART_HRS_RGB] >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Rusty Carruth | Customer Support | *rusty.carruth@smarth.com >>>>>>>>>>>>>>>>>>>>>>>>>>> * | >>>>>>>>>>>>>>>>>>>>>>>>>>> http://www.smarth.com >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> [image: linkedin] >>>>>>>>>>>>>>>>>>>>>>>>>>> [image: >>>>>>>>>>>>>>>>>>>>>>>>>>> twitter] See the >>>>>>>>>>>>>>>>>>>>>>>>>>> new M4[image: >>>>>>>>>>>>>>>>>>>>>>>>>>> cid:image004.jpg@01D348E7.AF930710] >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> See us on Storage Search >>>>>>>>>>>>>>>>>>>>>>>>>>> http://www.storagesearch.com/smart2.html >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> 510-624-5391 <(510)%20624-5391> | Fax: >>>>>>>>>>>>>>>>>>>>>>>>>>> 480-926-5579 <(480)%20926-5579> | 1325 N. >>>>>>>>>>>>>>>>>>>>>>>>>>> Fiesta Blvd. Suite 101 Gilbert, Az. 85233 >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> *From:* PLUG-discuss [mailto: >>>>>>>>>>>>>>>>>>>>>>>>>>> plug-discuss-bounces@lists.phxlinux.org] *On >>>>>>>>>>>>>>>>>>>>>>>>>>> Behalf Of *Michael Butash >>>>>>>>>>>>>>>>>>>>>>>>>>> *Sent:* Sunday, October 29, 2017 10:05 AM >>>>>>>>>>>>>>>>>>>>>>>>>>> *To:* Main PLUG discussion list >>>>>>>>>>>>>>>>>>>>>>>>>>> *Subject:* Re: computer slow >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> If I ever have that, it's usually because of >>>>>>>>>>>>>>>>>>>>>>>>>>> something with a memory leak, or desktop graphic compositing is degrading >>>>>>>>>>>>>>>>>>>>>>>>>>> over time. >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Before you reboot, see if you can ssh into it >>>>>>>>>>>>>>>>>>>>>>>>>>> from another computer and check htop (or just top all you have), see if >>>>>>>>>>>>>>>>>>>>>>>>>>> something is consuming all your memory or cpu. >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Desktop compositors are all shite from what I >>>>>>>>>>>>>>>>>>>>>>>>>>> can tell (including windoze), they're all just a varying degree of broken >>>>>>>>>>>>>>>>>>>>>>>>>>> when you push them, or just have a slow (or buggy) video card. Depending >>>>>>>>>>>>>>>>>>>>>>>>>>> on your desktop environment of choice, try turning down graphics options, >>>>>>>>>>>>>>>>>>>>>>>>>>> or disabling the compositor all together to see if it helps stability. >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> -mb >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> On Sun, Oct 29, 2017 at 3:41 AM, Michael < >>>>>>>>>>>>>>>>>>>>>>>>>>> bmike1@gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> I'm almost certain that in my bag of tricks I >>>>>>>>>>>>>>>>>>>>>>>>>>> had instructions on 'resetting' my computer when it started acting weird >>>>>>>>>>>>>>>>>>>>>>>>>>> but I can't find them. Riddle me this: I try to leave the computer on 24/7 >>>>>>>>>>>>>>>>>>>>>>>>>>> (maybe I shouldn't do that) and twice so far I come up to it and it is >>>>>>>>>>>>>>>>>>>>>>>>>>> non-responsive or really slow to respond. Anyone know how to fix this? >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> :-)~MIKE~(-: >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------ >>>>>>>>>>>>>>>>>>>>>>>>>>> --------------------- >>>>>>>>>>>>>>>>>>>>>>>>>>> PLUG-discuss mailing list - >>>>>>>>>>>>>>>>>>>>>>>>>>> PLUG-discuss@lists.phxlinux.org >>>>>>>>>>>>>>>>>>>>>>>>>>> To subscribe, unsubscribe, or to change your >>>>>>>>>>>>>>>>>>>>>>>>>>> mail settings: >>>>>>>>>>>>>>>>>>>>>>>>>>> http://lists.phxlinux.org/mail >>>>>>>>>>>>>>>>>>>>>>>>>>> man/listinfo/plug-discuss >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------ >>>>>>>>>>>>>>>>>>>>>>>>>>> --------------------- >>>>>>>>>>>>>>>>>>>>>>>>>>> PLUG-discuss mailing list - >>>>>>>>>>>>>>>>>>>>>>>>>>> PLUG-discuss@lists.phxlinux.org >>>>>>>>>>>>>>>>>>>>>>>>>>> To subscribe, unsubscribe, or to change your >>>>>>>>>>>>>>>>>>>>>>>>>>> mail settings: >>>>>>>>>>>>>>>>>>>>>>>>>>> http://lists.phxlinux.org/mail >>>>>>>>>>>>>>>>>>>>>>>>>>> man/listinfo/plug-discuss >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>> :-)~MIKE~(-: >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------ >>>>>>>>>>>>>>>>>>>>>>>>>> --------------------- >>>>>>>>>>>>>>>>>>>>>>>>>> PLUG-discuss mailing list - >>>>>>>>>>>>>>>>>>>>>>>>>> PLUG-discuss@lists.phxlinux.org >>>>>>>>>>>>>>>>>>>>>>>>>> To subscribe, unsubscribe, or to change your mail >>>>>>>>>>>>>>>>>>>>>>>>>> settings: >>>>>>>>>>>>>>>>>>>>>>>>>> http://lists.phxlinux.org/mail >>>>>>>>>>>>>>>>>>>>>>>>>> man/listinfo/plug-discuss >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>> A mouse trap, placed on top of your alarm clock, >>>>>>>>>>>>>>>>>>>>>>>>> will prevent you from rolling over and going back to sleep after you hit >>>>>>>>>>>>>>>>>>>>>>>>> the snooze button. >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> Stephen >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------ >>>>>>>>>>>>>>>>>>>>>>>>> --------------------- >>>>>>>>>>>>>>>>>>>>>>>>> PLUG-discuss mailing list - >>>>>>>>>>>>>>>>>>>>>>>>> PLUG-discuss@lists.phxlinux.org >>>>>>>>>>>>>>>>>>>>>>>>> To subscribe, unsubscribe, or to change your mail >>>>>>>>>>>>>>>>>>>>>>>>> settings: >>>>>>>>>>>>>>>>>>>>>>>>> http://lists.phxlinux.org/mail >>>>>>>>>>>>>>>>>>>>>>>>> man/listinfo/plug-discuss >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>> :-)~MIKE~(-: >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>> :-)~MIKE~(-: >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>> :-)~MIKE~(-: >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> --------------------------------------------------- >>>>>>>>>>>>>>>>>>>>>> PLUG-discuss mailing list - >>>>>>>>>>>>>>>>>>>>>> PLUG-discuss@lists.phxlinux.org >>>>>>>>>>>>>>>>>>>>>> To subscribe, unsubscribe, or to change your mail >>>>>>>>>>>>>>>>>>>>>> settings: >>>>>>>>>>>>>>>>>>>>>> http://lists.phxlinux.org/mail >>>>>>>>>>>>>>>>>>>>>> man/listinfo/plug-discuss >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> --------------------------------------------------- >>>>>>>>>>>>>>>>>>>>> PLUG-discuss mailing list - >>>>>>>>>>>>>>>>>>>>> PLUG-discuss@lists.phxlinux.org >>>>>>>>>>>>>>>>>>>>> To subscribe, unsubscribe, or to change your mail >>>>>>>>>>>>>>>>>>>>> settings: >>>>>>>>>>>>>>>>>>>>> http://lists.phxlinux.org/mail >>>>>>>>>>>>>>>>>>>>> man/listinfo/plug-discuss >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>> :-)~MIKE~(-: >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> --------------------------------------------------- >>>>>>>>>>>>>>>>>>>> PLUG-discuss mailing list - >>>>>>>>>>>>>>>>>>>> PLUG-discuss@lists.phxlinux.org >>>>>>>>>>>>>>>>>>>> To subscribe, unsubscribe, or to change your mail >>>>>>>>>>>>>>>>>>>> settings: >>>>>>>>>>>>>>>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> --------------------------------------------------- >>>>>>>>>>>>>>>>>>> PLUG-discuss mailing list - >>>>>>>>>>>>>>>>>>> PLUG-discuss@lists.phxlinux.org >>>>>>>>>>>>>>>>>>> To subscribe, unsubscribe, or to change your mail >>>>>>>>>>>>>>>>>>> settings: >>>>>>>>>>>>>>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>> :-)~MIKE~(-: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>> :-)~MIKE~(-: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> --------------------------------------------------- >>>>>>>>>>>>>>>>> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.or >>>>>>>>>>>>>>>>> g >>>>>>>>>>>>>>>>> To subscribe, unsubscribe, or to change your mail settings: >>>>>>>>>>>>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> --------------------------------------------------- >>>>>>>>>>>>>>>> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org >>>>>>>>>>>>>>>> To subscribe, unsubscribe, or to change your mail settings: >>>>>>>>>>>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>> :-)~MIKE~(-: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> --------------------------------------------------- >>>>>>>>>>>>>>> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org >>>>>>>>>>>>>>> To subscribe, unsubscribe, or to change your mail settings: >>>>>>>>>>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss >>>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> --------------------------------------------------- >>>>>>>>>>>>>> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org >>>>>>>>>>>>>> To subscribe, unsubscribe, or to change your mail settings: >>>>>>>>>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss >>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> -- >>>>>>>>>>>>> :-)~MIKE~(-: >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>>>>> :-)~MIKE~(-: >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>>>> :-)~MIKE~(-: >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> :-)~MIKE~(-: >>>>>>>>>> >>>>>>>>>> --------------------------------------------------- >>>>>>>>>> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org >>>>>>>>>> To subscribe, unsubscribe, or to change your mail settings: >>>>>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss >>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> --------------------------------------------------- >>>>>>>>> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org >>>>>>>>> To subscribe, unsubscribe, or to change your mail settings: >>>>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> :-)~MIKE~(-: >>>>>>>> >>>>>>>> --------------------------------------------------- >>>>>>>> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org >>>>>>>> To subscribe, unsubscribe, or to change your mail settings: >>>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss >>>>>>>> >>>>>>> >>>>>>> >>>>>>> --------------------------------------------------- >>>>>>> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org >>>>>>> To subscribe, unsubscribe, or to change your mail settings: >>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss >>>>>>> >>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> :-)~MIKE~(-: >>>>>> >>>>> >>>>> >>>>> >>>>> -- >>>>> :-)~MIKE~(-: >>>>> >>>> >>>> >>>> >>>> -- >>>> :-)~MIKE~(-: >>>> >>>> --------------------------------------------------- >>>> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org >>>> To subscribe, unsubscribe, or to change your mail settings: >>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss >>>> >>> >>> >>> --------------------------------------------------- >>> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org >>> To subscribe, unsubscribe, or to change your mail settings: >>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss >>> >> >> >> >> -- >> :-)~MIKE~(-: >> >> --------------------------------------------------- >> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org >> To subscribe, unsubscribe, or to change your mail settings: >> http://lists.phxlinux.org/mailman/listinfo/plug-discuss >> > > > --------------------------------------------------- > PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org > To subscribe, unsubscribe, or to change your mail settings: > http://lists.phxlinux.org/mailman/listinfo/plug-discuss > -- :-)~MIKE~(-: