Well, it might be protecting your computer but if it is too low it will just be annoying. You still need to run sensors and get those numbers if you haven't yet: https://askubuntu.com/questions/15832/how-do-i-get-the-cpu-temperature If your machine is legitimately overheating you need to address that with fans and ventilation, etc. On Mon, Oct 30, 2017 at 3:59 PM, Michael wrote: > if there is a shutoff point you did say disable it? > > > On Mon, Oct 30, 2017 at 6:56 PM, Brien Dieterle wrote: > >> Well, you're on the right track. Try to isolate whether glmark alone can >> crash it, or if you need stress as well. Then try opening up your case >> and point a fan in there. >> Also don't forget to check the BIOS for thermal management events that >> might be causing the shutdown/reboot. >> >> On Mon, Oct 30, 2017 at 3:52 PM, Michael wrote: >> >>> never mind..... I ran glmark around 5 minutes and then stress. that >>> crashed the machine! Not a nice reboot (like what it does with dt) but a >>> power failure outage, >>> >>> On Mon, Oct 30, 2017 at 6:41 PM, Michael wrote: >>> >>>> and if glmark2 doesn't crash it run stress the same amount of time? >>>> >>>> On Mon, Oct 30, 2017 at 6:37 PM, Michael wrote: >>>> >>>>> how long do I let glmark2's pretty horse rotate? >>>>> >>>>> >>>>> On Mon, Oct 30, 2017 at 6:36 PM, Michael wrote: >>>>> >>>>>> okay >>>>>> ` >>>>>> >>>>>> On Mon, Oct 30, 2017 at 6:10 PM, Brien Dieterle >>>>>> wrote: >>>>>> >>>>>>> I'd wait. If stress alone doesn't crash, run glmark2 by itself. >>>>>>> If glmark2 doesn't crash, run them both at the same time. >>>>>>> >>>>>>> >>>>>>> On Mon, Oct 30, 2017 at 3:01 PM, Michael wrote: >>>>>>> >>>>>>>> run this now or after stress completes? >>>>>>>> ? >>>>>>>> >>>>>>>> On Mon, Oct 30, 2017 at 5:59 PM, Brien Dieterle >>>>>>>> wrote: >>>>>>>> >>>>>>>>> Well, not yet ;-). If it doesn't crash, you might need to stress >>>>>>>>> the graphics card as well with one of these tools: >>>>>>>>> >>>>>>>>> https://www.pcsuggest.com/gpu-benchmarking-and-stress-testin >>>>>>>>> g-in-linux/ >>>>>>>>> >>>>>>>>> So maybe kick off both stress and >>>>>>>>> >>>>>>>>> glmark2 --run-forever >>>>>>>>> >>>>>>>>> >>>>>>>>> On Mon, Oct 30, 2017 at 2:55 PM, Michael wrote: >>>>>>>>> >>>>>>>>>> if it doesn't crash I'll start hounding the darktable forums. >>>>>>>>>> >>>>>>>>>> On Mon, Oct 30, 2017 at 5:45 PM, Michael >>>>>>>>>> wrote: >>>>>>>>>> >>>>>>>>>>> Just started..... lets see what happens >>>>>>>>>>> >>>>>>>>>>> On Mon, Oct 30, 2017 at 5:36 PM, Brien Dieterle < >>>>>>>>>>> briend@gmail.com> wrote: >>>>>>>>>>> >>>>>>>>>>>> Forget darktable for now. Did you run stress test for more >>>>>>>>>>>> than 10 seconds? >>>>>>>>>>>> >>>>>>>>>>>> This will run a stress test for 30 minutes: >>>>>>>>>>>> >>>>>>>>>>>> stress --cpu 8 --io 4 --vm 2 --hdd 2 --timeout 1800s >>>>>>>>>>>> >>>>>>>>>>>> If you can get it to crash with just this stress program, then >>>>>>>>>>>> it has nothing to do with darktable >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> On Mon, Oct 30, 2017 at 2:24 PM, Michael >>>>>>>>>>>> wrote: >>>>>>>>>>>> >>>>>>>>>>>>> I have no sensors running and as for it panicing when warm >>>>>>>>>>>>> sometimes it panics after I run dt 2 minutes after it had been shut down an >>>>>>>>>>>>> hour and doesn't panic even though dt had run10 minutes. >>>>>>>>>>>>> >>>>>>>>>>>>> On Mon, Oct 30, 2017 at 4:31 PM, Brien Dieterle < >>>>>>>>>>>>> briend@gmail.com> wrote: >>>>>>>>>>>>> >>>>>>>>>>>>>> Check your bios settings for hardware monitoring and >>>>>>>>>>>>>> temperature limits. You may have it set with a maximum temperature so the >>>>>>>>>>>>>> machine panics when it's just warm. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Try raising this number or disabling the feature entirely >>>>>>>>>>>>>> >>>>>>>>>>>>>> But first check your sensors by installing a temperature >>>>>>>>>>>>>> monitoring program >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Oct 30, 2017 1:04 PM, "Michael" wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>>> it is sooo ify! I just ran it for like 10 minutes with no >>>>>>>>>>>>>>> crashes whereas before I had just started the computer and ran dt for 2 >>>>>>>>>>>>>>> minutes and it crashed. Then I restarted and I had a repeat performance of >>>>>>>>>>>>>>> the 2 minute thing. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> On Mon, Oct 30, 2017 at 3:38 PM, Michael >>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> $ stress --cpu 8 --io 4 --vm 2 --vm-bytes 128M --timeout >>>>>>>>>>>>>>>> 10s >>>>>>>>>>>>>>>> stress: info: [7571] dispatching hogs: 8 cpu, 4 io, 2 vm, 0 >>>>>>>>>>>>>>>> hdd >>>>>>>>>>>>>>>> stress: info: [7571] successful run completed in 10s >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> I don't know what that was suppossed to tell me but there >>>>>>>>>>>>>>>> it is. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On Mon, Oct 30, 2017 at 3:36 PM, Michael >>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> I am experiencing no slowness. It is like the days where >>>>>>>>>>>>>>>>> you had a power switch on the back of your computer... or it is like a hard >>>>>>>>>>>>>>>>> reboot. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> On Mon, Oct 30, 2017 at 3:33 PM, Stephen Partington < >>>>>>>>>>>>>>>>> cryptworks@gmail.com> wrote: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> OpenCL in darktable mainly impacts rendering. it should >>>>>>>>>>>>>>>>>> have no effect on on system or ram consumption unless you are experiencing >>>>>>>>>>>>>>>>>> slowness during render cycles. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> On Mon, Oct 30, 2017 at 12:21 PM, Michael < >>>>>>>>>>>>>>>>>> bmike1@gmail.com> wrote: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> You know.... I'm having trouble running darktable. It >>>>>>>>>>>>>>>>>>> seems that after I start it it runs a few minutes and then reboots the >>>>>>>>>>>>>>>>>>> computer. Probably because I do not have a GPU (I don't think). Then I saw >>>>>>>>>>>>>>>>>>> this thread and thought that I'd give that a try. So it seems I can not run >>>>>>>>>>>>>>>>>>> chrome and darktable at the same time. >>>>>>>>>>>>>>>>>>> ___ >>>>>>>>>>>>>>>>>>> 'lspci' shows that my graphics card is : >>>>>>>>>>>>>>>>>>> 01:00.0 VGA compatible controller: Advanced Micro >>>>>>>>>>>>>>>>>>> Devices, Inc. [AMD/ATI] RV770 [Radeon HD 4850] >>>>>>>>>>>>>>>>>>> and 'lspci|grep gpu' returned an empty set >>>>>>>>>>>>>>>>>>> (if I did that correctly) >>>>>>>>>>>>>>>>>>> so I suppose the cheapest way to fix this is to get a >>>>>>>>>>>>>>>>>>> gpu.... correct? >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> On Mon, Oct 30, 2017 at 12:09 PM, Carruth, Rusty < >>>>>>>>>>>>>>>>>>> Rusty.Carruth@smartm.com> wrote: >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> In my experience, it’s almost always Firefox taking all >>>>>>>>>>>>>>>>>>>> of memory. (Or Chrome, or whatever web browser you’re using). >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> I agree with Mr B, run top or htop and see what’s, >>>>>>>>>>>>>>>>>>>> well, on top ;-) >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Rusty >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> [image: SMART_HRS_RGB] >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Rusty Carruth | Customer Support | *rusty.carruth@smarth.com >>>>>>>>>>>>>>>>>>>> * | http://www.smarth.com >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> [image: linkedin] >>>>>>>>>>>>>>>>>>>> [image: >>>>>>>>>>>>>>>>>>>> twitter] See the new M4[image: >>>>>>>>>>>>>>>>>>>> cid:image004.jpg@01D348E7.AF930710] >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> See us on Storage Search >>>>>>>>>>>>>>>>>>>> http://www.storagesearch.com/smart2.html >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> 510-624-5391 <(510)%20624-5391> | Fax: 480-926-5579 >>>>>>>>>>>>>>>>>>>> <(480)%20926-5579> | 1325 N. Fiesta Blvd. Suite 101 >>>>>>>>>>>>>>>>>>>> Gilbert, Az. 85233 >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> *From:* PLUG-discuss [mailto:plug-discuss-bounces@l >>>>>>>>>>>>>>>>>>>> ists.phxlinux.org] *On Behalf Of *Michael Butash >>>>>>>>>>>>>>>>>>>> *Sent:* Sunday, October 29, 2017 10:05 AM >>>>>>>>>>>>>>>>>>>> *To:* Main PLUG discussion list >>>>>>>>>>>>>>>>>>>> *Subject:* Re: computer slow >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> If I ever have that, it's usually because of something >>>>>>>>>>>>>>>>>>>> with a memory leak, or desktop graphic compositing is degrading over time. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Before you reboot, see if you can ssh into it from >>>>>>>>>>>>>>>>>>>> another computer and check htop (or just top all you have), see if >>>>>>>>>>>>>>>>>>>> something is consuming all your memory or cpu. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Desktop compositors are all shite from what I can tell >>>>>>>>>>>>>>>>>>>> (including windoze), they're all just a varying degree of broken when you >>>>>>>>>>>>>>>>>>>> push them, or just have a slow (or buggy) video card. Depending on your >>>>>>>>>>>>>>>>>>>> desktop environment of choice, try turning down graphics options, or >>>>>>>>>>>>>>>>>>>> disabling the compositor all together to see if it helps stability. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> -mb >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> On Sun, Oct 29, 2017 at 3:41 AM, Michael < >>>>>>>>>>>>>>>>>>>> bmike1@gmail.com> wrote: >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> I'm almost certain that in my bag of tricks I had >>>>>>>>>>>>>>>>>>>> instructions on 'resetting' my computer when it started acting weird but I >>>>>>>>>>>>>>>>>>>> can't find them. Riddle me this: I try to leave the computer on 24/7 (maybe >>>>>>>>>>>>>>>>>>>> I shouldn't do that) and twice so far I come up to it and it is >>>>>>>>>>>>>>>>>>>> non-responsive or really slow to respond. Anyone know how to fix this? >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> :-)~MIKE~(-: >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> --------------------------------------------------- >>>>>>>>>>>>>>>>>>>> PLUG-discuss mailing list - >>>>>>>>>>>>>>>>>>>> PLUG-discuss@lists.phxlinux.org >>>>>>>>>>>>>>>>>>>> To subscribe, unsubscribe, or to change your mail >>>>>>>>>>>>>>>>>>>> settings: >>>>>>>>>>>>>>>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> --------------------------------------------------- >>>>>>>>>>>>>>>>>>>> PLUG-discuss mailing list - >>>>>>>>>>>>>>>>>>>> PLUG-discuss@lists.phxlinux.org >>>>>>>>>>>>>>>>>>>> To subscribe, unsubscribe, or to change your mail >>>>>>>>>>>>>>>>>>>> settings: >>>>>>>>>>>>>>>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>> :-)~MIKE~(-: >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> --------------------------------------------------- >>>>>>>>>>>>>>>>>>> PLUG-discuss mailing list - >>>>>>>>>>>>>>>>>>> PLUG-discuss@lists.phxlinux.org >>>>>>>>>>>>>>>>>>> To subscribe, unsubscribe, or to change your mail >>>>>>>>>>>>>>>>>>> settings: >>>>>>>>>>>>>>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>> A mouse trap, placed on top of your alarm clock, will >>>>>>>>>>>>>>>>>> prevent you from rolling over and going back to sleep after you hit the >>>>>>>>>>>>>>>>>> snooze button. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Stephen >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> --------------------------------------------------- >>>>>>>>>>>>>>>>>> PLUG-discuss mailing list - >>>>>>>>>>>>>>>>>> PLUG-discuss@lists.phxlinux.org >>>>>>>>>>>>>>>>>> To subscribe, unsubscribe, or to change your mail >>>>>>>>>>>>>>>>>> settings: >>>>>>>>>>>>>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>> :-)~MIKE~(-: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>> :-)~MIKE~(-: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>> :-)~MIKE~(-: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> --------------------------------------------------- >>>>>>>>>>>>>>> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org >>>>>>>>>>>>>>> To subscribe, unsubscribe, or to change your mail settings: >>>>>>>>>>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss >>>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> --------------------------------------------------- >>>>>>>>>>>>>> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org >>>>>>>>>>>>>> To subscribe, unsubscribe, or to change your mail settings: >>>>>>>>>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss >>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> -- >>>>>>>>>>>>> :-)~MIKE~(-: >>>>>>>>>>>>> >>>>>>>>>>>>> --------------------------------------------------- >>>>>>>>>>>>> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org >>>>>>>>>>>>> To subscribe, unsubscribe, or to change your mail settings: >>>>>>>>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> --------------------------------------------------- >>>>>>>>>>>> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org >>>>>>>>>>>> To subscribe, unsubscribe, or to change your mail settings: >>>>>>>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>>>> :-)~MIKE~(-: >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> :-)~MIKE~(-: >>>>>>>>>> >>>>>>>>>> --------------------------------------------------- >>>>>>>>>> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org >>>>>>>>>> To subscribe, unsubscribe, or to change your mail settings: >>>>>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss >>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> --------------------------------------------------- >>>>>>>>> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org >>>>>>>>> To subscribe, unsubscribe, or to change your mail settings: >>>>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> :-)~MIKE~(-: >>>>>>>> >>>>>>>> --------------------------------------------------- >>>>>>>> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org >>>>>>>> To subscribe, unsubscribe, or to change your mail settings: >>>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss >>>>>>>> >>>>>>> >>>>>>> >>>>>>> --------------------------------------------------- >>>>>>> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org >>>>>>> To subscribe, unsubscribe, or to change your mail settings: >>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss >>>>>>> >>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> :-)~MIKE~(-: >>>>>> >>>>> >>>>> >>>>> >>>>> -- >>>>> :-)~MIKE~(-: >>>>> >>>> >>>> >>>> >>>> -- >>>> :-)~MIKE~(-: >>>> >>> >>> >>> >>> -- >>> :-)~MIKE~(-: >>> >>> --------------------------------------------------- >>> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org >>> To subscribe, unsubscribe, or to change your mail settings: >>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss >>> >> >> >> --------------------------------------------------- >> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org >> To subscribe, unsubscribe, or to change your mail settings: >> http://lists.phxlinux.org/mailman/listinfo/plug-discuss >> > > > > -- > :-)~MIKE~(-: > > --------------------------------------------------- > PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org > To subscribe, unsubscribe, or to change your mail settings: > http://lists.phxlinux.org/mailman/listinfo/plug-discuss >