The driver appears to be loading:

 

$ lsmod| grep rt2x00

rt2x00pci              13287  1 rt2800pci

rt2x00mmio             13603  2 rt2800pci,rt2800mmio

rt2x00lib              55307  5 rt2x00pci,rt2800lib,rt2800pci,rt2800mmio,rt2x00mmio

mac80211              626489  6 rtl_usb,rtlwifi,rt2x00lib,rt2x00pci,rt2800lib,rtl8192cu

cfg80211              484040  3 mac80211,rtlwifi,rt2x00lib

 and pci-id and RT5362 do not appear in dmesg:

 $ dmesg |grep RT5362

 $ dmesg |grep pci-id

 $ 

On Fri, Aug 25, 2017 at 8:02 AM, Michael <bmike1@gmail.com> wrote:

$ iwconfig

lo        no wireless extensions.

On Fri, Aug 25, 2017 at 7:57 AM, Michael <bmike1@gmail.com> wrote:

iwconfig doesn't see it

On Thu, Aug 24, 2017 at 5:23 PM, Michael Butash <michael@butash.net> wrote:

Need to make sure the system sees it as a usable network device.  Do: 

iwconfig  ## verifies if the system sees it as a proper 802.11 device, and/or ap association

ip link  ## sees the nic as a real interface

ip addr  ## shows ip layer data, if it has an address

cat /var/log/syslog | grep NetworkManager  ## verfies if network-manager is trying to do anything with it

Also, does the systray applet show the network scanning for any wifi devices?  You should see *some* ssid's being found.

-mb

On Thu, Aug 24, 2017 at 1:45 PM, Michael <bmike1@gmail.com> wrote:

or more as it is being detected just not transmitting data. what should I do?

On Thu, Aug 24, 2017 at 4:34 PM, Michael <bmike1@gmail.com> wrote:

lspci sees SOMETHING at least. It says 

03:00.0 Network controller: Ralink corp. RT5362 PCI 802.11n Wireless Network Adapter

so it is detected.

The card in the other computer is almost identical It is pci-e wile the one not being detected is a pci card.

On Thu, Aug 24, 2017 at 4:17 PM, Michael Butash <michael@butash.net> wrote:

Look at the pci devices with lspci, grep for network devices:

>> lspci | grep Network

>> 02:00.0 Network controller: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter (rev 32)

You should see a like device there, your new card.  If it's not being detected properly, search dmesg output looking for an unknown device, might be a firmware thing or something.  Dmesg should at least tell you what pci-id, vendor, or model of chip to then google why that doesn't load under your os.

-mb

On Wed, Aug 23, 2017 at 4:30 PM, Michael <bmike1@gmail.com> wrote:

I got two wireless cards (netis wf2118) for two computers. both computers have mint. One card is pci the other pci-e. the pci-e card works great. the pci not so much. the green connectivity light on the pci card is happily a solid green. Any ideas on how to get it to work?....

I just googled it and the one hit I got said he had a dead card. How can I tell if it is dead?

--

:-)~MIKE~(-:

---------------------------------------------------
PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org
To subscribe, unsubscribe, or to change your mail settings:
http://lists.phxlinux.org/mailman/listinfo/plug-discuss

---------------------------------------------------
PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org
To subscribe, unsubscribe, or to change your mail settings:
http://lists.phxlinux.org/mailman/listinfo/plug-discuss

--

:-)~MIKE~(-:

--

:-)~MIKE~(-:

---------------------------------------------------
PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org
To subscribe, unsubscribe, or to change your mail settings:
http://lists.phxlinux.org/mailman/listinfo/plug-discuss

---------------------------------------------------
PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org
To subscribe, unsubscribe, or to change your mail settings:
http://lists.phxlinux.org/mailman/listinfo/plug-discuss

--

:-)~MIKE~(-:

--

:-)~MIKE~(-:

--

:-)~MIKE~(-:

---------------------------------------------------
PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org
To subscribe, unsubscribe, or to change your mail settings:
http://lists.phxlinux.org/mailman/listinfo/plug-discuss