I think you mean ddrescue? I have been running it for a few days and getting lots of errors.

GNU ddrescue 1.17
Press Ctrl-C to interrupt
rescued:   328577 MB,  errsize:  85901 MB,  current rate:   12047 kB/s
   ipos:   414478 MB,   errors:     321,    average rate:    6771 kB/s
   opos:   414478 MB,    time since last successful read:       0 s
Copying non-tried blocks...

Any suggestions on how to cool the usb drive with the errors. I have it flat on a cold large faux granite desk surface which is very cold to the touch. But the drive is still very warm.

Thanks!

Mark

On Sun, Dec 20, 2015 at 6:48 PM, George Toft <george@georgetoft.com> wrote:
There is a special version of dd that will retry on bad sectors and try to formulate a best guess for the bad sector.  I've used it with some success - took about 2 weeks to recover a 300GB drive.  I also had to keep it refrigerated.
Regards,

George Toft
On 12/19/2015 9:32 AM, Stephen Partington wrote:

There is an application called test disk that might be handy for data recovery. But this looks like your drive is in bad shape.

On Dec 19, 2015 9:25 AM, "Mark Phillips" <mark@phillipsmarketing.biz> wrote:
I have a 2 TB WD USB drive that I formated with NTFS. I have a rather extensive movie/TV library on it for my plex media server, and I am getting read errors. I hope I haven't lost all of that data! It has been attached to one of my Netgear wireless access points, hence the need for NTFS.

fdisk -l gives for the drive
/dev/sdc1            2048  3906963455  1953480704    7  HPFS/NTFS/exFAT

I tried running smartctl on the device, (which is now plugged into a usb 3.0 port on my laptop) and got this error after a few tests

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed: read failure       90%     10086         494859396
# 2  Extended offline    Completed: read failure       90%     10073         494859396
# 3  Extended offline    Completed: read failure       90%     10072         494859396
# 4  Short offline       Completed: read failure       90%     10072         494859396

I noticed this in the attributes section of smartctl -
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       122
  3 Spin_Up_Time            0x0027   202   200   021    Pre-fail  Always       -       4891
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       464
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   100   253   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   087   087   000    Old_age   Always       -       10086
 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       40
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       17
193 Load_Cycle_Count        0x0032   198   198   000    Old_age   Always       -       6187
194 Temperature_Celsius     0x0022   121   102   000    Old_age   Always       -       31
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       31
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   100   253   000    Old_age   Offline      -       0

Any thoughts on how I can fix this drive, or do I need to get a new one? What is the best way to copy the contents of the drive with these errors to a new drive?

Thanks!

Mark

---------------------------------------------------
PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org
To subscribe, unsubscribe, or to change your mail settings:
http://lists.phxlinux.org/mailman/listinfo/plug-discuss


---------------------------------------------------
PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org
To subscribe, unsubscribe, or to change your mail settings:
http://lists.phxlinux.org/mailman/listinfo/plug-discuss


---------------------------------------------------
PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org
To subscribe, unsubscribe, or to change your mail settings:
http://lists.phxlinux.org/mailman/listinfo/plug-discuss