On Sun, Aug 4, 2013 at 8:52 AM, <kitepilot@kitepilot.com> wrote:

THen you are good... :)
Create a partition and install a FAT-32 filesystem if you plan on pluging that thing to Wincrap.
ET

Michael Havens writes:

dmesg says the drive is sdc. I can then mount the drive and look at it's
contents.
now for your directions:
bmike1@PresarioLapTop1:~$ lsusb > /tmp/junk-lsusb-0.txt
bmike1@PresarioLapTop1:~$ cat /proc/partitions > /tmp/junk-partitions-0.txt
bmike1@PresarioLapTop1:~$ lsusb > /tmp/junk-lsusb-1.txt
bmike1@PresarioLapTop1:~$ cat /proc/partitions > /tmp/junk-partitions-1.txt
bmike1@PresarioLapTop1:~$ diff /tmp/junk-lsusb-?.txt
0a1

Bus 001 Device 005: ID 0930:6544 Toshiba Corp. Kingston DataTraveler 2.0

Stick (2GB)
All is good.
I can tell you right now that there are no partitions on this drive. It is
dev/sdc. I kinow this is the case because I can mount /dev/sdc /mnt/sdc and
look at the contents. There is nothing in it that I want to keep.
:-)~MIKE~(-:

On Sun, Aug 4, 2013 at 8:12 AM, <kitepilot@kitepilot.com> wrote:

First question to answer is: Is the drive being detected?
Unplug the drive, wait a minute and do:
lsusb > /tmp/junk-lsusb-0.txt
cat /proc/partitions > /tmp/junk-partitions-0.txt
Now plug the drive, wait a minute and do:
lsusb > /tmp/junk-lsusb-1.txt
cat /proc/partitions > /tmp/junk-partitions-1.txt
Then
diff /tmp/junk-lsusb-?.txt
If you see at leas one line you are good, otherwise you are dead in the
water.
If you can see the device, then:
diff /tmp/junk-partitions-?.txt
That's your partition.
Depending on what you have (if you have) next steps are different.
YMMV...
ET

Michael Havens writes:

Okay, when I was making a backup drive I did so on a drive that was too
small. (bummer) now, when I stick that device in nothing happens (the nice
little file manager doesn't appear). So I think that is because I created
a
label for this drive. So I wonder to myself how to fix it. What I think of
is mkfs. What is a generic filesystem I can use on microsoft computers
too?
is xtfs the best or should I go with fat 16/32? or am I incorrect that
this
will fix the problem?
:-)~MIKE~(-:

------------------------------**---------------------
PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.**org<PLUG-discuss@lists.phxlinux.org>

To subscribe, unsubscribe, or to change your mail settings:

http://lists.phxlinux.org/**mailman/listinfo/plug-discuss<http://lists.phxlinux.org/mailman/listinfo/plug-discuss>

---------------------------------------------------
PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org
To subscribe, unsubscribe, or to change your mail settings:
http://lists.phxlinux.org/mailman/listinfo/plug-discuss