Generally i run the quick zero which is the first and last 300mb i hiess the next step is finding a home for the data and the 10+ hours to zero the long way.
Did you zero the drive all the way to the end, or just the first part. Also maybe you zeroed the partition and not the drive? Many of the raid superblocks are at the very end of the drive, and it would still be catching them if you haven't done the whole thing.
I really think this is whats happening since the Device Mapper is trying to grab hold of it.
Brian Cluff
On 10/18/2012 12:50 PM, Stephen wrote:
well 4 of the 6 drives involved are actively part of a raid. the one
i am using for Linux was already 0ed for that very reason, i do still
have a usb HDD still attached so i will try disconnecting that.
odd thing is i was able to boot a 10.10x64 no issue and installed
there and have been doing dist-upgrades to current. i will take a 2nd
look but its is really puzzling.
I will certainly have to keep an eye out. I haven't even figured out
how i'm going to configure grub yet to get multiple boot set up. i may
leave it ghetto and just use bios.
On Thu, Oct 18, 2012 at 12:31 PM, Brian Cluff <brian@snaptek.com> wrote:
The fact that the device mapper is getting involved with the drive leads me
to believe that the drive was part of a raid, or at least configured by your
raid controller at one time and there is now a superblock on it that is
messing up everything.
You'll probably need to zero out that superblock before things will start to
behave correctly.
Brian Cluff
On 10/17/2012 07:42 PM, Stephen wrote:
I have an AMD based chiset and i am trying to get ubuntu to boot right
now and it is stalling, and i am having trouble ironing out what is
going on.
I have onbaord raid drives attached to the onboard raid chipset
(SB710) however i am not intending to install to those drives the
drive i wish to install to is actually a SATA connected single drive
but i am having the worst time getting Ubuntu 12.04 to even finish its
boot cycle. and im not getting allot of feedback.
The errors i am getting are ata_id[336]: HDIO_GET_IDENTITY failed for
'/dev/sdb': Invalid argument
- this is with all Raid disks disconnected and raid turned off in
bios. just a single SATA HDD
I get one of the two following errors if i have raid disks attached
A similar entry as above comes up or i get
udevd[167] inotify_add_watch(6, /dev/dm-1, 10) failed: No Such file or
directory
the most promising option i have so far is booting with nodmraid but
it seems to just hang and go no place after detecting my CDrom devices
This is rather perplexing overall.
Ideally i would like my 2 onboard raids to be connected running
windows and then let linux run amok on my extra sata hdd but it either
is really pissed off in a way i cannot figure out or it really does
not like that port.
Anyone have any thoughts?
---------------------------------------------------
PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
To subscribe, unsubscribe, or to change your mail settings:
http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
---------------------------------------------------
PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
To subscribe, unsubscribe, or to change your mail settings:
http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss