The more you add and remove the cooler from the MB the harder it is to work with. I wonder about the intel engineers sometimes, this is really the best they could come up with??

On Fri, Oct 15, 2010 at 10:15 AM, John <jharitos@yahoo.com> wrote:
Okay, I see what my problem was even though it was turned it wasn't turned all the way where the round top part fit into the notch. I took a pair of pliers and turned it and the push pin freed.

--- On Tue, 10/12/10, Brian Cluff <brian@snaptek.com> wrote:

> From: Brian Cluff <brian@snaptek.com>
> Subject: Re: Removing socket 1156 stock cooler
> To: "Main PLUG discussion list" <plug-discuss@lists.plug.phoenix.az.us>
> Date: Tuesday, October 12, 2010, 12:35 AM
> Those are relatively east to remove,
> but not totally obvious how to do
> it.  The heat sync stays connected to the board by
> pushing a pin between
> the 2 plastic wedges that keep it connected to the
> motherboard.  To get
> the fan off you have to turn the top that you pressed in
> when you
> attached it 90 degrees and then pull up it. That will pull
> the little
> pin back and allow it to be pulled free from the
> motherboard.  Just do
> that 4 times and the fan should be able to be removed
> fairly easy.
>
> Brian Cluff
>
> On 10/11/2010 03:32 PM, John wrote:
> > Sorry, I should've specified it was the stock cooler
> something similar
> > to this.
> >
> > http://www.thermaltakeusa.com/Product.aspx?C=1417&ID=1960
> >
> > I'm thinking of sending the MB with the cooler
> attached. I bent a pin on
> > the last one even though it was toast already.
> >
> > --- On *Mon, 10/11/10, JD Austin /<jd@twingeckos.com>/*
> wrote:
> >
> >
> >     From: JD Austin <jd@twingeckos.com>
> >     Subject: Re: Removing socket
> 1156 stock cooler
> >     To: "Main PLUG discussion
> list" <plug-discuss@lists.plug.phoenix.az.us>
> >     Date: Monday, October 11,
> 2010, 5:24 PM
> >
> >     Which kind do you have? They
> come in a few different styles:
> >     http://www.thermaltakeusa.com/Products.aspx?C=1417
> >     <http://www.thermaltakeusa.com/Products.aspx?C=1417>
> >     On Mon, Oct 11, 2010 at 15:19,
> John <jharitos@yahoo.com
> >     </mc/compose?to=jharitos@yahoo.com>>
> wrote:
> >
> >         I bought the
> parts to make a new Ubuntu system. Unfortunately,
> >         the new power
> supply was bad and I cooked my RAM, MB, i5
> >         processor, and
> one other MB before I realized the PSU was the
> >         culprit. I need
> to send everything back to the PSU maker. I
> >         removed the 1156
> cooler once and it was not a pleasant
> >         experience. Two
> of the push pins came right up but the other two
> >         would not and I
> had a nasty time getting it off. I searched vids
> >         and they said to
> use a screw driver but this didn't work. Anyone
> >         have a video or
> an idea of how to remove the fan without using
> >         force.
> >
> >
> >
> >     
>    ---------------------------------------------------
> >         PLUG-discuss
> mailing list -
> >         PLUG-discuss@lists.plug.phoenix.az.us
> >     
>    </mc/compose?to=PLUG-discuss@lists.plug.phoenix.az.us>
> >         To subscribe,
> unsubscribe, or to change your mail settings:
> >         http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
> >
> >
> >
> >     -----Inline Attachment
> Follows-----
> >
> > 
>    ---------------------------------------------------
> >     PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
> >     </mc/compose?to=PLUG-discuss@lists.plug.phoenix.az.us>
> >     To subscribe, unsubscribe, or
> to change your mail settings:
> >     http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
> >
> >
> >
> >
> > ---------------------------------------------------
> > PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
> > To subscribe, unsubscribe, or to change your mail
> settings:
> > http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>
> ---------------------------------------------------
> PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
> To subscribe, unsubscribe, or to change your mail
> settings:
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>



---------------------------------------------------
PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
To subscribe, unsubscribe, or to change your mail settings:
http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss