Okay, so lets go another route.  I could make do with two laptops.  I would like a little more.  Raid 1 for my Linux Dev Box.  So two desktop boxes would work.  Then I could just stack one on the other, add a KVM and I get about the same effect.

I have all towers now however that is because that is how they come from Dell.  When I used to build my own I used to always use desktop cases to maximize the room and to lift my monitor up a few more inches.  My monitor could be higher, by about 4 inches.

------------------------
Keith Smith

--- On Thu, 8/5/10, Nadim Hoque <nadimhoque@gmail.com> wrote:

From: Nadim Hoque <nadimhoque@gmail.com>
Subject: Re: OT : Small home rack
To: "Main PLUG discussion list" <plug-discuss@lists.plug.phoenix.az.us>
Date: Thursday, August 5, 2010, 12:08 PM

So I also agree with towers instead of racks. My ex-roomate had a 2 u rack server and was loud and sounded like a leaf blower. Now if you go with a 1u then storage will also be an issue because of the height (and i think 4 drives at most). With towers, as brian said, are much quieter and if you get a server type case, then you can fit a lot more drives in the machine before resorting to external raid device. With that said, i do have a tower myself and am quiet content with it with the noise and performance. Another thing to note is that it is easier to add add-on cards to the machine such as a raid controller or lan card.

On Thu, Aug 5, 2010 at 11:46 AM, keith smith <klsmith2020@yahoo.com> wrote:

That is an interesting idea I have toyed with.  Reduces the amount of floor space taken up in a home office.


------------------------
Keith Smith

--- On Thu, 8/5/10, Eric Shubert <ejs@shubes.net> wrote:

From: Eric Shubert <ejs@shubes.net>
Subject: Re: OT : Small home rack
To: plug-discuss@lists.plug.phoenix.az.us
Date: Thursday, August 5, 2010, 11:34 AM


Like yourself, I expect that most geeky types would prefer to "roll their own".

Personally, I have 4 VM hosts (1 prod, 3 test/devel) in my closet (literally). They're on shelves with the rear facing out. They all run headless most of the time, but I have a monitor and kb I can easily attach when there's a problem. I've also wired the closet with appropriate power (UPS for prod) and networking. Everything's out of sight, very quiet, and relatively low power consumption. I also added a vent at the top of the closet to allow whatever heat to dissipate.

-- -Eric 'shubes'

keith smith wrote:
>
> I'm thinking of building my own computers from now on.  I use two computers for LAMP dev and was thinking that a small rack made out of angle iron might do the job.  Add a KVM switch and I use a lot less room.
>
> ------------------------
> Keith Smith
>
> --- On *Thu, 8/5/10, Eric Shubert /<ejs@shubes.net>/* wrote:
>
>
>     From: Eric Shubert <ejs@shubes.net>
>     Subject: Re: OT : Small home rack
>     To: plug-discuss@lists.plug.phoenix.az.us
>     Date: Thursday, August 5, 2010, 11:04 AM
>
>     keith smith wrote:
>      >
>      > Hi,
>      >
>      > I was wondering if there would be a need or market for a small
>     simple rack for home use.  Maybe one that would hold three 4-U (or
>     eight 2-U) rack mount servers.  I'm thinking it would stand about 3
>     ft.  I would think there would be a need for wheels on the bottom or
>     a way to swivel the servers to get to the back.
>      >
>      > Any thoughts?
>      >
>      > ------------------------
>      > Keith Smith
>      >
>      >
>
>     I think that a tower would suffice in SB/home environments. With
>     virtual hosts, of course. ;) I'm personally using an old
>     (retired/reprovisioned) P4 SFF workstation (w/ 5 VM guests) as a server.
>
>     -- -Eric 'shubes'
>
>     ---------------------------------------------------
>     PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
>     </mc/compose?to=PLUG-discuss@lists.plug.phoenix.az.us>
>     To subscribe, unsubscribe, or to change your mail settings:
>     http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>
>


---------------------------------------------------
PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
To subscribe, unsubscribe, or to change your mail settings:
http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss


---------------------------------------------------
PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
To subscribe, unsubscribe, or to change your mail settings:
http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss



--
Nadim Hoque
Computer Systems Engineering
The School of Computing, Informatics and Decision Systems Engineering
cell: 480-518-6235
nadimhoque@gmail.com

-----Inline Attachment Follows-----

---------------------------------------------------
PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
To subscribe, unsubscribe, or to change your mail settings:
http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss