What happened?

I was able to get an application to start with the same /bin/sh script that ran on Lenny, but will not run in Ubuntu LTS Serrver?

It's telling me the user path and file path are not there.

root@storm:/home/sts/current/examples# cat /etc/init.d/stsd
#! /bin/sh

# AUTOMATICLLY GENERATED INIT SCRIPT FROM LAST SETUP.sh run.
# PLEASE CHECK THAT PATHS ARE CORRECT BEFORE USAGE!
PREFIX=/home/sts/current

# CONFPREFIX should preferable be common for all versions
CONFPREFIX=$PREFIX
#CONFPREFIX=/home/sts/current

# Do we want a watchdog process or not. 1 is yes, 0 is no.
WATCHDOG=1

# Don't run axissts as root. Specify its user here. Note that this
# user must have write access to $PREFIX.
USER=sts

# The maximum number of open files we can handle before the
# system stops it. Change this if you have defined a higher value in
# your kernel.
FILES=10000

STARTPROGRAM=$PREFIX/bin/run_axissts.sh
DAEMON=$PREFIX/bin/axissts
SERVICENAME=sts_ststorm8080
CONFIGFILE=$CONFPREFIX/etc/${SERVICENAME}.conf
KEYDIR=/home/sts/etc/keys
PATH=/.:/bin:/usr/bin:/sbin:/usr/sbin
PIDFILE=$CONFPREFIX/${SERVICENAME}.pid
WDPIDFILE=$CONFPREFIX/${SERVICENAME}watchdog.pid

ARGS="-f $CONFIGFILE -d -p $PIDFILE -K $KEYDIR"

# Check for existence of $PREFIX.
if [ -z $PREFIX ]
then
echo "You must configure where you have installed $SERVICENAME!"
exit 0
fi

# Check if we have write access to the $CONFPREFIX directory
su $USER -c "test -w $CONFPREFIX"
filestatus=$?

if [ $filestatus != "0" ]
then
    echo "The user $USER needs write access to $CONFPREFIX."
    exit 0
fi

# Check if we have a configuration file.
if [ ! -f $CONFIGFILE ]
then
echo "No configuration file: $CONFIGFILE"
exit 0
fi

# Check if we have a key directory.
if [ ! -d $KEYDIR ]
then
echo "No key directory!"
echo "Place the key file you have been given from Axis in $KEYDIR"
exit 0
fi

if [ ! -x $DAEMON ]
then
echo "No such file: $DAEMON"
exit 0
fi

case "$1" in
start)
    echo "Starting Server: $SERVICENAME:"

    # Bump up the number of filedescriptors we can use.
    ulimit -n $FILES

    if [ $WATCHDOG = 1 ]
    then
      COMMAND="$STARTPROGRAM $DAEMON $CONFIGFILE $PIDFILE $WDPIDFILE $KEYDIR &"
    else
      COMMAND="$DAEMON $ARGS"
    fi

    # Run the daemon as $USER.

    echo "Starting $COMMAND"
    su $USER -c "$COMMAND"
    ;;

stop)

    echo "Stopping Server: $SERVICENAME"

    # Check for watchdog pid file.
    if [ -f $WDPIDFILE ]
    then
      kill `cat $WDPIDFILE`
      rm -f $WDPIDFILE
    else
      if [ $WATCHDOG = 1 ]
      then
        echo "No Server Watchdog pid file: $WDPIDFILE!"
        exit 0
      fi
    fi

    # Check for PIDFILE.
    if [ ! -f $PIDFILE ]
    then
      echo "No ST Server pid file: $PIDFILE!"
      exit 0
    fi

    kill `cat $PIDFILE`
    rm -f $PIDFILE
    ;;

reload)
    echo "Not implemented."
    ;;

force-reload|restart)
    sh $0 stop
    sh $0 start
    ;;

status)
    if [ -f $PIDFILE ]
    then
      PID=`cat $PIDFILE`
      echo "ST Server running as process $PID"
      exit 0
    fi
    ;;
*)
    echo "Usage: /etc/init.d/$SERVICENAME {start|stop|restart|force-reload|status}"
    exit 1
    ;;

esac

exit 0
root@storm:/home/sts/current/examples#

When I run the /etc/init.d/stsd file I get:

in/connection_monitor.php
root      7042 6860 0 15:47 pts/1    00:00:00 grep sts
root@storm:/home/sts/current/examples# ls -al
total 72
drwxr-xr-x 2 sts sts 4096 2010-03-24 15:44 .
drwxrwxrwx 14 sts sts 4096 2010-03-24 15:44 ..
-rwxr-xr-x 1 sts sts 2093 2008-08-08 04:05 axissts.conf
-rwxr-xr-x 1 sts sts 1520 2009-09-28 01:39 gst-install-deps.sh
-rwxr-xr-x 1 sts sts   795 2007-10-26 05:31 handle_failed_queries.sh
-rwxr-xr-x 1 sts sts   216 2008-08-20 03:57 logrotate-sts
-rwxr-xr-x 1 sts sts 3558 2008-08-08 03:56 mediaproxyd
-rwxr-xr-x 1 sts sts   110 2008-07-28 07:27 php.ini
-rwxr-xr-x 1 sts sts 3303 2009-08-14 07:31 sthelpers
-rwxr-xr-x 1 sts sts 18676 2010-02-23 01:02 stmediaconvert
-rwxr-xr-x 1 sts sts 2900 2010-03-24 15:44 stsd
-rwxr-xr-x 1 sts sts 2979 2010-03-24 14:07 stsd_dynamic
-rwxr-xr-x 1 sts sts 4917 2009-09-18 05:43 virtualhost.conf
root@storm:/home/sts/current/examples# cat /etc/init.d/stsd
#! /bin/sh

# AUTOMATICLLY GENERATED INIT SCRIPT FROM LAST SETUP.sh run.
# PLEASE CHECK THAT PATHS ARE CORRECT BEFORE USAGE!
PREFIX=/home/sts/current

# CONFPREFIX should preferable be common for all versions
#CONFPREFIX=$PREFIX
CONFPREFIX=/home/sts/current

# Do we want a watchdog process or not. 1 is yes, 0 is no.
WATCHDOG=1

# Don't run axissts as root. Specify its user here. Note that this
# user must have write access to $PREFIX.
USER=sts

# The maximum number of open files the ST Server can handle before the
# system stops it. Change this if you have defined a higher value in
# your kernel.
FILES=10000

STARTPROGRAM=$PREFIX/bin/run_axissts.sh
DAEMON=$PREFIX/bin/axissts
SERVICENAME=sts_ststorm8080
CONFIGFILE=$CONFPREFIX/etc/${SERVICENAME}.conf
KEYDIR=/home/sts/etc/keys
PATH=/.:/bin:/usr/bin:/sbin:/usr/sbin
PIDFILE=$CONFPREFIX/${SERVICENAME}.pid
WDPIDFILE=$CONFPREFIX/${SERVICENAME}watchdog.pid

ARGS="-f $CONFIGFILE -d -p $PIDFILE -K $KEYDIR"

# Check for existence of $PREFIX.
if [ -z $PREFIX ]
then
echo "You must configure where you have installed $SERVICENAME!"
exit 0
fi

# Check if we have write access to the $CONFPREFIX directory
su $USER -c "test -w $CONFPREFIX"
filestatus=$?

if [ $filestatus != "0" ]
then
    echo "The user $USER needs write access to $CONFPREFIX."
    exit 0
fi

# Check if we have a configuration file.
if [ ! -f $CONFIGFILE ]
then
echo "No configuration file: $CONFIGFILE"
exit 0
fi

# Check if we have a key directory.
if [ ! -d $KEYDIR ]
then
echo "No key directory!"
echo "Place the key file you have been given from Axis in $KEYDIR"
exit 0
fi

if [ ! -x $DAEMON ]
then
echo "No such file: $DAEMON"
exit 0
fi

case "$1" in
start)
    echo "Starting Axis ST Server: $SERVICENAME:"

    # Bump up the number of filedescriptors we can use.
    ulimit -n $FILES

    if [ $WATCHDOG = 1 ]
    then
      COMMAND="$STARTPROGRAM $DAEMON $CONFIGFILE $PIDFILE $WDPIDFILE $KEYDIR &"
    else
      COMMAND="$DAEMON $ARGS"
    fi

    # Run the daemon as $USER.

    echo "Starting $COMMAND"
    su $USER -c "$COMMAND"
    ;;

stop)

    echo "Stopping Axis ST Server: $SERVICENAME"

    # Check for watchdog pid file.
    if [ -f $WDPIDFILE ]
    then
      kill `cat $WDPIDFILE`
      rm -f $WDPIDFILE
    else
      if [ $WATCHDOG = 1 ]
      then
        echo "No ST Server Watchdog pid file: $WDPIDFILE!"
        exit 0
      fi
    fi

    # Check for PIDFILE.
    if [ ! -f $PIDFILE ]
    then
      echo "No ST Server pid file: $PIDFILE!"
      exit 0
    fi

    kill `cat $PIDFILE`
    rm -f $PIDFILE
    ;;

reload)
    echo "Not implemented."
    ;;

force-reload|restart)
    sh $0 stop
    sh $0 start
    ;;

status)
    if [ -f $PIDFILE ]
    then
      PID=`cat $PIDFILE`
      echo "ST Server running as process $PID"
      exit 0
    fi
    ;;
*)
    echo "Usage: /etc/init.d/$SERVICENAME {start|stop|restart|force-reload|status}"
    exit 1
    ;;

esac

exit 0
root@storm:/home/sts/current/examples# clear
root@storm:/home/sts/current/examples# whoami
root
root@storm:/home/sts/current/examples# su - sts
sts@storm:~$ /etc/init.d/stsd start
Password:
su: Authentication failure

sts@storm:~$ exit
logout
root@storm:/home/sts/current/examples# cd /etc/init.d
root@storm:/etc/init.d# ls -al /home/sts/current/etc
total 28
drwxr-xr-x 2 sts sts 4096 2010-03-24 15:12 .
drwxrwxrwx 14 sts sts 4096 2010-03-24 15:44 ..
-rwxrwxrwx 1 sts sts 1703 2006-05-16 05:41 axissts.conf
-rwxrwxrwx 1 sts sts 447 2010-03-24 15:12 mediaproxyd.conf
-rwxrwxrwx 1 sts sts 447 2010-03-24 14:46 mediaproxy_mediastorm554.conf
-rwxrwxrwx 1 sts sts    4 2010-03-24 14:49 record_manager.php_storm.ivedasolutions.com.pid
-rwxrwxrwx 1 sts sts 1559 2010-03-24 14:07 sts_ststorm8080.conf
root@storm:/etc/init.d# ls -al /home/sts/current/bin
total 568
drwxr-xr-x 2 sts sts   4096 2010-03-24 14:59 .
drwxrwxrwx 14 sts sts   4096 2010-03-24 15:44 ..
-rwxr-xr-x 1 sts sts 125372 2010-02-23 01:02 axissts
-rwxr-xr-x 1 sts sts   8909 2009-02-02 07:26 batch_upgrade.php
-rwxr-xr-x 1 sts sts 29416 2009-08-17 04:21 camera_maintenance.php
-rwxr-xr-x 1 sts sts   4746 2009-09-02 02:28 camera_upgrade.php
lrwxrwxrwx 1 sts sts     25 2010-03-24 12:44 config_main.php -> ../config/config_main.php
-rwxr-xr-x 1 sts sts   7078 2009-09-02 02:28 connection_monitor.php
-rwxr-xr-x 1 sts sts   3025 2009-08-25 03:13 event_cleanup.php
-rwxr-xr-x 1 sts sts 54670 2009-08-28 09:53 event_rpcgen.py
-rwxr-xr-x 1 sts sts    784 2006-08-03 03:06 exec_delayed.php
-rwxr-xr-x 1 sts sts    745 2009-01-05 06:23 generate_self_signed_certificate.sh
-rwxr-xr-x 1 sts sts 122260 2010-02-23 01:02 mediaproxy
-rwxr-xr-x 1 sts sts 13508 2010-02-23 01:02 mjpg2movie
-rwxr-xr-x 1 sts sts   4279 2009-03-06 05:50 password_manage.php
-rwxr-xr-x 1 sts sts 12541 2007-10-26 00:04 prune_event_dirs.php
-rwxr-xr-x 1 sts sts   3439 2009-08-25 03:13 quota_cleanup.php
-rwxr-xr-x 1 sts sts   6531 2009-10-05 06:07 record_manager.php
-rwxr-xr-x 1 sts sts   7732 2009-08-25 03:13 rmevents.php
-rwxr-xr-x 1 sts sts   1834 2008-10-23 05:54 run_axissts.sh
-rwxr-xr-x 1 sts sts   2422 2008-10-20 01:08 run_mediaproxy.sh
-rwxr-xr-x 1 sts sts 18311 2009-10-06 10:34 server_watchdog.php
-rwxr-xr-x 1 sts sts   1342 2009-03-11 06:24 session_cleanup.php
-rwxr-xr-x 1 sts sts   4302 2009-10-01 07:52 smsclient_http_get.php
-rwxr-xr-x 1 sts sts   4821 2009-10-01 07:52 smsclient_pixie.php
-rwxr-xr-x 1 sts sts 57324 2010-02-23 01:02 smtpclient
-rwxr-xr-x 1 sts sts 18676 2010-02-23 01:02 stmediaconvert
-rwxr-xr-x 1 sts sts    375 2009-07-15 05:51 stmediaconvert.sh
root@storm:/etc/init.d# ./stsd start
Starting Axis ST Server: sts_ststorm8080:
Starting /home/sts/current/bin/run_axissts.sh /home/sts/current/bin/axissts /home/sts/current/etc/sts_ststorm8080.conf /home/sts/current/sts_ststorm8080.pid /home/sts/current/sts_ststorm8080watchdog.pid /home/sts/etc/keys &
/home/sts/current/bin/run_axissts.sh: 101: /home/sts/current/bin/axissts: not found
root@storm:/etc/init.d#

WTF? (so confiused)!

I even added a ./ to the stsd $PATH and that doesn't work?

No selinux - what could it be?
--
Office: (480)307-8707
AT&T: (503)754-4452
Systems Engineer
SomeplaceReallyGood.com