also like stated before dont forget
to 'chmod 777 /dev/lp1'
-Scott
slegge@govliquidation.com Sent by: plug-discuss-admin@lists.plug.phoenix.az.us
05/25/2005 04:39 PM
Please respond to
plug-discuss@lists.plug.phoenix.az.us
To
plug-discuss@lists.plug.phoenix.az.us
cc
Subject
Re: lpt2 without a real lpt2
card installed
Any more details? try 'rm -rf /dev/lp1' first I am not sure what distro
but some make ALLLLLL devices you could ever imagine (ie. hdm). then
you want to 'ln -s /dev/lp0 /dev/lp1'
also please post any log information if there is any. Another thing you
might look into is device mapping in the emu app (in WINE for example)
I know you can pick what dos named devices go to what unix device something
like COM1 = /dev/cua3 or whatever. I am not familiar with the one you are
using.
-Scott
Michael Shadel <mshadel@bigplanet.com>
Sent by: plug-discuss-admin@lists.plug.phoenix.az.us
05/25/2005 03:42 PM
Please respond to
plug-discuss@lists.plug.phoenix.az.us
To
plug-discuss@lists.plug.phoenix.az.us
cc
Subject
Re: lpt2 without a real lpt2
card installed
JD Austin wrote:
>
>
> slegge@govliquidation.com wrote:
>
>>
>> symlink the real device to the device its printing to.
>>
>>
>>
>> -Scott
>>
> After hearing his explaination I was going to say the same.
> Be sure to chmod it the same as the original device 777.
>
> JD
>
>>
>> I have a dos program running under dosemu, it has hundred of reports
>> that print to lpt2. dosemu will redirect a port to a network printer.
It
>> has an lpt1 port and my program will print to the network printer
if I
>> send it to lpt1. I have my reasons but I do not want to change
all the
>> reports to print to lpt1 and I do not want to install lpt2 cards
in all
>> of the desktops. I also believe I could print to a file and run
a
>> spooler, but again I would have to change all of the report to
print to
>> a file instead of lpt2.
>>
>
>--
>JD Austin
>Twin Geckos Technology Services LLC
>email: jd@twingeckos.com
>http://www.twingeckos.com
>phone/fax: 480.288.8195
>
I used the command
ln -S /dev/lp0 /dev/lp1
this does not make any difference, any other suggestions
thanks Michael