Hard drive On Thu, Jul 16, 2020 at 4:41 PM Michael wrote: > > Might the problem still be the he > > On Thu, Jul 16, 2020 at 4:37 PM Stephen Partington via PLUG-discuss < > plug-discuss@lists.phxlinux.org> wrote: > >> 68C under load is good. 80C+ idle is bad. >> >> >> On Thu, Jul 16, 2020 at 12:35 PM Michael via PLUG-discuss < >> plug-discuss@lists.phxlinux.org> wrote: >> >>> lets get back to heat... last time I was running glx (with the horse >>> and various other pictures) and watch, and stress ng the temp was like >>> 68. I don't think that is too bad. >>> >>> On Thu, Jul 16, 2020 at 3:19 PM Brian Cluff via PLUG-discuss >>> wrote: >>> > >>> > Looks like your drive probably isn't the problem. >>> > >>> > Brian Cluff >>> > >>> > On 7/16/20 11:54 AM, Michael via PLUG-discuss wrote: >>> > > On Thu, Jul 16, 2020 at 3:37 AM Brian Cluff via PLUG-discuss >>> > > wrote: >>> > >> Also check the health of your hard drive with smartctl. I've hard >>> > >> systems freeze on me because my hard drive was dying that then >>> appear to >>> > >> work again for a while after a reboot. Basically your drive starts >>> > >> throwing errors and eventually the system remounts it as read only >>> and >>> > >> your system eventually freaks out and freezes because it can't >>> write to >>> > >> the drive anymore. >>> > > I sure hope this is the problem. It'll give me an excuse to put an >>> ssd >>> > > in the machine. >>> > > This is from live media boot. I'll see if I can freeze the system >>> > > again.... it did when I tried it before but it hasn't frozen for a >>> > > couple of days now. >>> > > sudo smartctl --all /dev/sda >>> > > smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-26-generic] (local >>> build) >>> > > Copyright (C) 2002-19, Bruce Allen, Christian Franke, >>> www.smartmontools.org >>> > > >>> > > === START OF INFORMATION SECTION === >>> > > Model Family: Western Digital Caviar Blue (SATA) >>> > > Device Model: WDC WD3200AAKS-75L9A0 >>> > > Serial Number: WD-WMAV2S110171 >>> > > LU WWN Device Id: 5 0014ee 057775228 >>> > > Firmware Version: 02.03E02 >>> > > User Capacity: 320,072,933,376 bytes [320 GB] >>> > > Sector Size: 512 bytes logical/physical >>> > > Device is: In smartctl database [for details use: -P show] >>> > > ATA Version is: ATA8-ACS (minor revision not indicated) >>> > > SATA Version is: SATA 2.5, 3.0 Gb/s >>> > > Local Time is: Thu Jul 16 18:33:20 2020 UTC >>> > > SMART support is: Available - device has SMART capability. >>> > > SMART support is: Enabled >>> > > >>> > > === START OF READ SMART DATA SECTION === >>> > > SMART overall-health self-assessment test result: PASSED >>> > > >>> > > General SMART Values: >>> > > Offline data collection status: (0x84) Offline data collection >>> activity >>> > > was suspended by an interrupting command from >>> host. >>> > > Auto Offline Data Collection: Enabled. >>> > > Self-test execution status: ( 0) The previous self-test >>> > > routine completed >>> > > without error or no self-test has ever >>> > > been run. >>> > > Total time to complete Offline >>> > > data collection: ( 6000) seconds. >>> > > Offline data collection >>> > > capabilities: (0x7b) SMART execute Offline immediate. >>> > > Auto Offline data collection on/off support. >>> > > Suspend Offline collection upon new >>> > > command. >>> > > Offline surface scan supported. >>> > > Self-test supported. >>> > > Conveyance Self-test supported. >>> > > Selective Self-test supported. >>> > > SMART capabilities: (0x0003) Saves SMART data before >>> entering >>> > > power-saving mode. >>> > > Supports SMART auto save timer. >>> > > Error logging capability: (0x01) Error logging supported. >>> > > General Purpose Logging supported. >>> > > Short self-test routine >>> > > recommended polling time: ( 2) minutes. >>> > > Extended self-test routine >>> > > recommended polling time: ( 73) minutes. >>> > > Conveyance self-test routine >>> > > recommended polling time: ( 5) minutes. >>> > > SCT capabilities: (0x3037) SCT Status supported. >>> > > SCT Feature Control supported. >>> > > SCT Data Table supported. >>> > > >>> > > SMART Attributes Data Structure revision number: 16 >>> > > Vendor Specific SMART Attributes with Thresholds: >>> > > ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE >>> > > UPDATED WHEN_FAILED RAW_VALUE >>> > > 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail >>> > > Always - 0 >>> > > 3 Spin_Up_Time 0x0027 138 133 021 Pre-fail >>> > > Always - 4075 >>> > > 4 Start_Stop_Count 0x0032 089 089 000 Old_age >>> > > Always - 11090 >>> > > 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail >>> > > Always - 0 >>> > > 7 Seek_Error_Rate 0x002e 100 253 000 Old_age >>> > > Always - 0 >>> > > 9 Power_On_Hours 0x0032 019 019 000 Old_age >>> > > Always - 59593 >>> > > 10 Spin_Retry_Count 0x0032 100 100 000 Old_age >>> > > Always - 0 >>> > > 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age >>> > > Always - 0 >>> > > 12 Power_Cycle_Count 0x0032 098 098 000 Old_age >>> > > Always - 2282 >>> > > 192 Power-Off_Retract_Count 0x0032 199 199 000 Old_age >>> > > Always - 1044 >>> > > 193 Load_Cycle_Count 0x0032 197 197 000 Old_age >>> > > Always - 11090 >>> > > 194 Temperature_Celsius 0x0022 105 080 000 Old_age >>> > > Always - 38 >>> > > 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age >>> > > Always - 0 >>> > > 197 Current_Pending_Sector 0x0032 200 200 000 Old_age >>> > > Always - 0 >>> > > 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age >>> > > Offline - 0 >>> > > 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age >>> > > Always - 0 >>> > > 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age >>> > > Offline - 0 >>> > > 240 Head_Flying_Hours 0x0032 024 024 000 Old_age >>> > > Always - 55990 >>> > > 241 Total_LBAs_Written 0x0032 200 200 000 Old_age >>> > > Always - 78243499218 >>> > > 242 Total_LBAs_Read 0x0032 200 200 000 Old_age >>> > > Always - 174621575474 >>> > > >>> > > SMART Error Log Version: 1 >>> > > No Errors Logged >>> > > >>> > > SMART Self-test log structure revision number 1 >>> > > Num Test_Description Status Remaining >>> > > LifeTime(hours) LBA_of_first_error >>> > > # 1 Short offline Completed without error 00% >>> 14352 - >>> > > # 2 Short offline Completed without error 00% >>> 0 - >>> > > >>> > > SMART Selective self-test log data structure revision number 1 >>> > > SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS >>> > > 1 0 0 Not_testing >>> > > 2 0 0 Not_testing >>> > > 3 0 0 Not_testing >>> > > 4 0 0 Not_testing >>> > > 5 0 0 Not_testing >>> > > Selective self-test flags (0x0): >>> > > After scanning selected spans, do NOT read-scan remainder of disk. >>> > > If Selective self-test is pending on power-up, resume after 0 minute >>> delay. >>> > > >>> > > Well, I am running glmark2, watch, and stress-ng for about (one round >>> > > of glmark2) with no freeze. all from live media >>> > > -- >>> > > :-)~MIKE~(-: >>> > > --------------------------------------------------- >>> > > PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org >>> > > To subscribe, unsubscribe, or to change your mail settings: >>> > > https://lists.phxlinux.org/mailman/listinfo/plug-discuss >>> > >>> > --------------------------------------------------- >>> > PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org >>> > To subscribe, unsubscribe, or to change your mail settings: >>> > https://lists.phxlinux.org/mailman/listinfo/plug-discuss >>> >>> >>> >>> -- >>> :-)~MIKE~(-: >>> --------------------------------------------------- >>> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org >>> To subscribe, unsubscribe, or to change your mail settings: >>> https://lists.phxlinux.org/mailman/listinfo/plug-discuss >> >> >> >> -- >> A mouse trap, placed on top of your alarm clock, will prevent you from >> rolling over and going back to sleep after you hit the snooze button. >> >> Stephen >> >> --------------------------------------------------- >> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org >> To subscribe, unsubscribe, or to change your mail settings: >> https://lists.phxlinux.org/mailman/listinfo/plug-discuss > > -- > :-)~MIKE~(-: > -- :-)~MIKE~(-: