Might the problem still be the he On Thu, Jul 16, 2020 at 4:37 PM Stephen Partington via PLUG-discuss < plug-discuss@lists.phxlinux.org> wrote: > 68C under load is good. 80C+ idle is bad. > > > On Thu, Jul 16, 2020 at 12:35 PM Michael via PLUG-discuss < > plug-discuss@lists.phxlinux.org> wrote: > >> lets get back to heat... last time I was running glx (with the horse >> and various other pictures) and watch, and stress ng the temp was like >> 68. I don't think that is too bad. >> >> On Thu, Jul 16, 2020 at 3:19 PM Brian Cluff via PLUG-discuss >> wrote: >> > >> > Looks like your drive probably isn't the problem. >> > >> > Brian Cluff >> > >> > On 7/16/20 11:54 AM, Michael via PLUG-discuss wrote: >> > > On Thu, Jul 16, 2020 at 3:37 AM Brian Cluff via PLUG-discuss >> > > wrote: >> > >> Also check the health of your hard drive with smartctl. I've hard >> > >> systems freeze on me because my hard drive was dying that then >> appear to >> > >> work again for a while after a reboot. Basically your drive starts >> > >> throwing errors and eventually the system remounts it as read only >> and >> > >> your system eventually freaks out and freezes because it can't write >> to >> > >> the drive anymore. >> > > I sure hope this is the problem. It'll give me an excuse to put an ssd >> > > in the machine. >> > > This is from live media boot. I'll see if I can freeze the system >> > > again.... it did when I tried it before but it hasn't frozen for a >> > > couple of days now. >> > > sudo smartctl --all /dev/sda >> > > smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-26-generic] (local >> build) >> > > Copyright (C) 2002-19, Bruce Allen, Christian Franke, >> www.smartmontools.org >> > > >> > > === START OF INFORMATION SECTION === >> > > Model Family: Western Digital Caviar Blue (SATA) >> > > Device Model: WDC WD3200AAKS-75L9A0 >> > > Serial Number: WD-WMAV2S110171 >> > > LU WWN Device Id: 5 0014ee 057775228 >> > > Firmware Version: 02.03E02 >> > > User Capacity: 320,072,933,376 bytes [320 GB] >> > > Sector Size: 512 bytes logical/physical >> > > Device is: In smartctl database [for details use: -P show] >> > > ATA Version is: ATA8-ACS (minor revision not indicated) >> > > SATA Version is: SATA 2.5, 3.0 Gb/s >> > > Local Time is: Thu Jul 16 18:33:20 2020 UTC >> > > SMART support is: Available - device has SMART capability. >> > > SMART support is: Enabled >> > > >> > > === START OF READ SMART DATA SECTION === >> > > SMART overall-health self-assessment test result: PASSED >> > > >> > > General SMART Values: >> > > Offline data collection status: (0x84) Offline data collection >> activity >> > > was suspended by an interrupting command from >> host. >> > > Auto Offline Data Collection: Enabled. >> > > Self-test execution status: ( 0) The previous self-test >> > > routine completed >> > > without error or no self-test has ever >> > > been run. >> > > Total time to complete Offline >> > > data collection: ( 6000) seconds. >> > > Offline data collection >> > > capabilities: (0x7b) SMART execute Offline immediate. >> > > Auto Offline data collection on/off support. >> > > Suspend Offline collection upon new >> > > command. >> > > Offline surface scan supported. >> > > Self-test supported. >> > > Conveyance Self-test supported. >> > > Selective Self-test supported. >> > > SMART capabilities: (0x0003) Saves SMART data before >> entering >> > > power-saving mode. >> > > Supports SMART auto save timer. >> > > Error logging capability: (0x01) Error logging supported. >> > > General Purpose Logging supported. >> > > Short self-test routine >> > > recommended polling time: ( 2) minutes. >> > > Extended self-test routine >> > > recommended polling time: ( 73) minutes. >> > > Conveyance self-test routine >> > > recommended polling time: ( 5) minutes. >> > > SCT capabilities: (0x3037) SCT Status supported. >> > > SCT Feature Control supported. >> > > SCT Data Table supported. >> > > >> > > SMART Attributes Data Structure revision number: 16 >> > > Vendor Specific SMART Attributes with Thresholds: >> > > ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE >> > > UPDATED WHEN_FAILED RAW_VALUE >> > > 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail >> > > Always - 0 >> > > 3 Spin_Up_Time 0x0027 138 133 021 Pre-fail >> > > Always - 4075 >> > > 4 Start_Stop_Count 0x0032 089 089 000 Old_age >> > > Always - 11090 >> > > 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail >> > > Always - 0 >> > > 7 Seek_Error_Rate 0x002e 100 253 000 Old_age >> > > Always - 0 >> > > 9 Power_On_Hours 0x0032 019 019 000 Old_age >> > > Always - 59593 >> > > 10 Spin_Retry_Count 0x0032 100 100 000 Old_age >> > > Always - 0 >> > > 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age >> > > Always - 0 >> > > 12 Power_Cycle_Count 0x0032 098 098 000 Old_age >> > > Always - 2282 >> > > 192 Power-Off_Retract_Count 0x0032 199 199 000 Old_age >> > > Always - 1044 >> > > 193 Load_Cycle_Count 0x0032 197 197 000 Old_age >> > > Always - 11090 >> > > 194 Temperature_Celsius 0x0022 105 080 000 Old_age >> > > Always - 38 >> > > 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age >> > > Always - 0 >> > > 197 Current_Pending_Sector 0x0032 200 200 000 Old_age >> > > Always - 0 >> > > 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age >> > > Offline - 0 >> > > 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age >> > > Always - 0 >> > > 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age >> > > Offline - 0 >> > > 240 Head_Flying_Hours 0x0032 024 024 000 Old_age >> > > Always - 55990 >> > > 241 Total_LBAs_Written 0x0032 200 200 000 Old_age >> > > Always - 78243499218 >> > > 242 Total_LBAs_Read 0x0032 200 200 000 Old_age >> > > Always - 174621575474 >> > > >> > > SMART Error Log Version: 1 >> > > No Errors Logged >> > > >> > > SMART Self-test log structure revision number 1 >> > > Num Test_Description Status Remaining >> > > LifeTime(hours) LBA_of_first_error >> > > # 1 Short offline Completed without error 00% 14352 >> - >> > > # 2 Short offline Completed without error 00% 0 >> - >> > > >> > > SMART Selective self-test log data structure revision number 1 >> > > SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS >> > > 1 0 0 Not_testing >> > > 2 0 0 Not_testing >> > > 3 0 0 Not_testing >> > > 4 0 0 Not_testing >> > > 5 0 0 Not_testing >> > > Selective self-test flags (0x0): >> > > After scanning selected spans, do NOT read-scan remainder of disk. >> > > If Selective self-test is pending on power-up, resume after 0 minute >> delay. >> > > >> > > Well, I am running glmark2, watch, and stress-ng for about (one round >> > > of glmark2) with no freeze. all from live media >> > > -- >> > > :-)~MIKE~(-: >> > > --------------------------------------------------- >> > > PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org >> > > To subscribe, unsubscribe, or to change your mail settings: >> > > https://lists.phxlinux.org/mailman/listinfo/plug-discuss >> > >> > --------------------------------------------------- >> > PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org >> > To subscribe, unsubscribe, or to change your mail settings: >> > https://lists.phxlinux.org/mailman/listinfo/plug-discuss >> >> >> >> -- >> :-)~MIKE~(-: >> --------------------------------------------------- >> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org >> To subscribe, unsubscribe, or to change your mail settings: >> https://lists.phxlinux.org/mailman/listinfo/plug-discuss > > > > -- > A mouse trap, placed on top of your alarm clock, will prevent you from > rolling over and going back to sleep after you hit the snooze button. > > Stephen > > --------------------------------------------------- > PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org > To subscribe, unsubscribe, or to change your mail settings: > https://lists.phxlinux.org/mailman/listinfo/plug-discuss -- :-)~MIKE~(-: