I never changed the bios settings and I don't know how to underclock the machine. as for the fan I opened the case. I don't have a small strong fan to point in there... I only have a oscillating fan and box fans. On Sun, Nov 26, 2017 at 11:16 PM, Brien Dieterle wrote: > What have you done to test the overheating theory? Have you at least > popped the case and directed a strong fan in there and restarted the > stress/glmark test? > > Other things to try: > Bios settings. Reset to factory recommended defaults, adjust voltages, > underclock, ram timings, etc etc. Not suggesting you do these all at once- > one at a time. > > > On Sun, Nov 26, 2017 at 9:01 PM, Michael wrote: > >> no ... it crashes both with and without. sorry I wasn't clear. >> >> On Sun, Nov 26, 2017 at 9:31 PM, Stephen Partington > > wrote: >> >>> Well so far the thing crashes with the wifi card, and is stable without. >>> this to me suggests a driver or hardare issue with the card. >>> >>> Especially with the errors you had listed before. >>> >>> >>> On Sun, Nov 26, 2017 at 5:59 PM, Michael wrote: >>> >>>> with..... I do not have internet without. I don't know why but the >>>> ethernet port does not work now. do you want me to remove the card and see >>>> if it crashes it? >>>> >>>> On Sun, Nov 26, 2017 at 7:20 PM, Stephen Partington < >>>> cryptworks@gmail.com> wrote: >>>> >>>>> Crash with or without the wifi card? >>>>> >>>>> >>>>> Virus-free. >>>>> www.avast.com >>>>> >>>>> <#m_-6862869679939780864_m_6166556507672410501_m_-2810662078329617179_m_2812855064856121644_m_1756427078425960486_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> >>>>> >>>>> On Sun, Nov 26, 2017 at 4:47 PM, Michael wrote: >>>>> >>>>>> I an back to thinking that it is the power supply. How can I verify >>>>>> this? >>>>>> >>>>>> On Thu, Nov 23, 2017 at 11:21 AM, Michael wrote: >>>>>> >>>>>>> darn..... it just crashed again. You know I never had this problem >>>>>>> when I was hard-wired in. Let's try that! >>>>>>> >>>>>>> On Thu, Nov 16, 2017 at 10:33 AM, Brien Dieterle >>>>>>> wrote: >>>>>>> >>>>>>>> Yay! You might consider just forgetting about wifi cards and get a >>>>>>>> wifi router. Many let you configure the router as a client to your >>>>>>>> existing wifi network, so you can just plug in up to 5 devices to the thing >>>>>>>> and it "just works". >>>>>>>> I use this setup to get 3 machines onto the wifi. >>>>>>>> Machine-to-machine xfers are very fast since they avoid the wifi entirely. >>>>>>>> Also I suspect that sharing one wifi connection is more efficient than 3 >>>>>>>> devices competing for signal (but I have no idea, really) >>>>>>>> >>>>>>>> On Thu, Nov 16, 2017 at 3:45 AM, Michael wrote: >>>>>>>> >>>>>>>>> it was the card. I had forgotten about running stress and glmark >>>>>>>>> and that having caused it to crash. Thanks for reminding me. When I run >>>>>>>>> stress and glmark now it does not crash but I had run the sed command >>>>>>>>> already >>>>>>>>> >>>>>>>>> On Wed, Nov 15, 2017 at 9:11 PM, Brien Dieterle >>>>>>>>> wrote: >>>>>>>>> >>>>>>>>>> First determine if the card is crashing the computer. Remove the >>>>>>>>>> card, then try to crash it using stress and glmark and finally darktable >>>>>>>>>> >>>>>>>>>> On Nov 15, 2017 6:09 PM, "Michael" wrote: >>>>>>>>>> >>>>>>>>>>> dude! when I put the card in is about the time it started to >>>>>>>>>>> crash. any recommendations on a card that won't cause it to crash if the >>>>>>>>>>> sed command doesn't fix it?? >>>>>>>>>>> >>>>>>>>>>> On Wed, Nov 15, 2017 at 9:01 AM, Stephen Partington < >>>>>>>>>>> cryptworks@gmail.com> wrote: >>>>>>>>>>> >>>>>>>>>>>> All of that data suggests your wireless card is the issue. I >>>>>>>>>>>> see no other errors. >>>>>>>>>>>> >>>>>>>>>>>> See the following: >>>>>>>>>>>> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1422190 >>>>>>>>>>>> and >>>>>>>>>>>> https://answers.launchpad.net/ubuntu/+question/404313 >>>>>>>>>>>> >>>>>>>>>>>> 404313 actually has a workaround as well that looks like it >>>>>>>>>>>> might eliminate the error. >>>>>>>>>>>> >>>>>>>>>>>> On Wed, Nov 15, 2017 at 4:31 AM, Michael >>>>>>>>>>>> wrote: >>>>>>>>>>>> >>>>>>>>>>>>> Well, after I edit with darktable the computer reboots and >>>>>>>>>>>>> periodically halts. The first thought I had was that the power supply was >>>>>>>>>>>>> failing. But it only happens after running darktable. Is there a way we >>>>>>>>>>>>> could nail down what is causing this before I start to just replace parts? >>>>>>>>>>>>> >>>>>>>>>>>>> It reboot at about 17:23 and here are the errors it is giving >>>>>>>>>>>>> me in dmesg and /var/log/syslog. Does this point you to what >>>>>>>>>>>>> it could be? >>>>>>>>>>>>> >>>>>>>>>>>>> I don't know what I'm looking at in dmesg and don't know how >>>>>>>>>>>>> far back to copy! >>>>>>>>>>>>> Hope this is good. >>>>>>>>>>>>> >>>>>>>>>>>>> [ 66.482976] [UFW BLOCK] IN=wlp3s6 OUT= MAC= >>>>>>>>>>>>> SRC=fe80:0000:0000:0000:2372:3ac4:279c:f220 >>>>>>>>>>>>> DST=ff02:0000:0000:0000:0000:0000:0001:0003 LEN=76 TC=0 >>>>>>>>>>>>> HOPLIMIT=255 FLOWLBL=1036500 PROTO=UDP SPT=5355 DPT=5355 LEN=36 >>>>>>>>>>>>> [ 66.732895] [UFW BLOCK] IN=wlp3s6 OUT= MAC= >>>>>>>>>>>>> SRC=fe80:0000:0000:0000:2372:3ac4:279c:f220 >>>>>>>>>>>>> DST=ff02:0000:0000:0000:0000:0000:0001:0003 LEN=76 TC=0 >>>>>>>>>>>>> HOPLIMIT=255 FLOWLBL=1036500 PROTO=UDP SPT=5355 DPT=5355 LEN=36 >>>>>>>>>>>>> [ 66.982905] [UFW BLOCK] IN=wlp3s6 OUT= MAC= >>>>>>>>>>>>> SRC=fe80:0000:0000:0000:2372:3ac4:279c:f220 >>>>>>>>>>>>> DST=ff02:0000:0000:0000:0000:0000:0001:0003 LEN=76 TC=0 >>>>>>>>>>>>> HOPLIMIT=255 FLOWLBL=1036500 PROTO=UDP SPT=5355 DPT=5355 LEN=36 >>>>>>>>>>>>> [ 67.394753] [UFW BLOCK] IN=wlp3s6 OUT= MAC= SRC=192.168.0.9 >>>>>>>>>>>>> DST=224.0.0.252 LEN=56 TOS=0x00 PREC=0x00 TTL=255 ID=31808 PROTO=UDP >>>>>>>>>>>>> SPT=5355 DPT=5355 LEN=36 >>>>>>>>>>>>> [ 67.660399] [UFW BLOCK] IN=wlp3s6 OUT= MAC= SRC=192.168.0.9 >>>>>>>>>>>>> DST=224.0.0.252 LEN=56 TOS=0x00 PREC=0x00 TTL=255 ID=31837 PROTO=UDP >>>>>>>>>>>>> SPT=5355 DPT=5355 LEN=36 >>>>>>>>>>>>> [ 67.898448] [UFW BLOCK] IN=wlp3s6 OUT= MAC= SRC=192.168.0.9 >>>>>>>>>>>>> DST=224.0.0.252 LEN=56 TOS=0x00 PREC=0x00 TTL=255 ID=31873 PROTO=UDP >>>>>>>>>>>>> SPT=5355 DPT=5355 LEN=36 >>>>>>>>>>>>> [ 69.425251] [UFW BLOCK] IN=wlp3s6 OUT= >>>>>>>>>>>>> MAC=e4:be:ed:04:95:ca:b0:7f:b9:af:f1:db:08:00 >>>>>>>>>>>>> SRC=198.252.206.25 DST=192.168.0.9 LEN=110 TOS=0x08 PREC=0x00 TTL=53 >>>>>>>>>>>>> ID=13722 DF PROTO=TCP SPT=443 DPT=41690 WINDOW=60 RES=0x00 ACK PSH URGP=0 >>>>>>>>>>>>> [ 71.863569] [UFW BLOCK] IN=wlp3s6 OUT= >>>>>>>>>>>>> MAC=e4:be:ed:04:95:ca:b0:7f:b9:af:f1:db:86:dd >>>>>>>>>>>>> SRC=2607:f8b0:4002:080a:0000:0000:0000:200e >>>>>>>>>>>>> DST=2600:8807:c007:d200:39b7:9792:f36e:935d LEN=127 TC=0 >>>>>>>>>>>>> HOPLIMIT=59 FLOWLBL=550839 PROTO=TCP SPT=443 DPT=50808 WINDOW=114 RES=0x00 >>>>>>>>>>>>> ACK PSH URGP=0 >>>>>>>>>>>>> [ 72.081655] [UFW BLOCK] IN=wlp3s6 OUT= >>>>>>>>>>>>> MAC=e4:be:ed:04:95:ca:b0:7f:b9:af:f1:db:86:dd >>>>>>>>>>>>> SRC=2607:f8b0:4002:080a:0000:0000:0000:200e >>>>>>>>>>>>> DST=2600:8807:c007:d200:39b7:9792:f36e:935d LEN=127 TC=0 >>>>>>>>>>>>> HOPLIMIT=59 FLOWLBL=868246 PROTO=TCP SPT=443 DPT=50808 WINDOW=114 RES=0x00 >>>>>>>>>>>>> ACK PSH URGP=0 >>>>>>>>>>>>> [ 72.522503] [UFW BLOCK] IN=wlp3s6 OUT= >>>>>>>>>>>>> MAC=e4:be:ed:04:95:ca:b0:7f:b9:af:f1:db:86:dd >>>>>>>>>>>>> SRC=2607:f8b0:4002:080a:0000:0000:0000:200e >>>>>>>>>>>>> DST=2600:8807:c007:d200:39b7:9792:f36e:935d LEN=127 TC=0 >>>>>>>>>>>>> HOPLIMIT=59 FLOWLBL=645260 PROTO=TCP SPT=443 DPT=50808 WINDOW=114 RES=0x00 >>>>>>>>>>>>> ACK PSH URGP=0 >>>>>>>>>>>>> [ 73.414368] [UFW BLOCK] IN=wlp3s6 OUT= >>>>>>>>>>>>> MAC=e4:be:ed:04:95:ca:b0:7f:b9:af:f1:db:86:dd >>>>>>>>>>>>> SRC=2607:f8b0:4002:080a:0000:0000:0000:200e >>>>>>>>>>>>> DST=2600:8807:c007:d200:39b7:9792:f36e:935d LEN=127 TC=0 >>>>>>>>>>>>> HOPLIMIT=59 FLOWLBL=16434 PROTO=TCP SPT=443 DPT=50808 WINDOW=114 RES=0x00 >>>>>>>>>>>>> ACK PSH URGP=0 >>>>>>>>>>>>> [ 75.198980] [UFW BLOCK] IN=wlp3s6 OUT= >>>>>>>>>>>>> MAC=e4:be:ed:04:95:ca:b0:7f:b9:af:f1:db:86:dd >>>>>>>>>>>>> SRC=2607:f8b0:4002:080a:0000:0000:0000:200e >>>>>>>>>>>>> DST=2600:8807:c007:d200:39b7:9792:f36e:935d LEN=127 TC=0 >>>>>>>>>>>>> HOPLIMIT=59 FLOWLBL=892115 PROTO=TCP SPT=443 DPT=50808 WINDOW=114 RES=0x00 >>>>>>>>>>>>> ACK PSH URGP=0 >>>>>>>>>>>>> [ 77.713042] [UFW BLOCK] IN=wlp3s6 OUT= >>>>>>>>>>>>> MAC=e4:be:ed:04:95:ca:b0:7f:b9:af:f1:db:86:dd >>>>>>>>>>>>> SRC=2607:f8b0:4002:0c06:0000:0000:0000:00bd >>>>>>>>>>>>> DST=2600:8807:c007:d200:39b7:9792:f36e:935d LEN=123 TC=0 >>>>>>>>>>>>> HOPLIMIT=49 FLOWLBL=589661 PROTO=TCP SPT=443 DPT=60286 WINDOW=803 RES=0x00 >>>>>>>>>>>>> ACK PSH URGP=0 >>>>>>>>>>>>> [ 78.776864] [UFW BLOCK] IN=wlp3s6 OUT= >>>>>>>>>>>>> MAC=e4:be:ed:04:95:ca:b0:7f:b9:af:f1:db:86:dd >>>>>>>>>>>>> SRC=2607:f8b0:4002:080a:0000:0000:0000:200e >>>>>>>>>>>>> DST=2600:8807:c007:d200:39b7:9792:f36e:935d LEN=127 TC=0 >>>>>>>>>>>>> HOPLIMIT=59 FLOWLBL=907299 PROTO=TCP SPT=443 DPT=50808 WINDOW=114 RES=0x00 >>>>>>>>>>>>> ACK PSH URGP=0 >>>>>>>>>>>>> [ 94.398331] [UFW BLOCK] IN=wlp3s6 OUT= >>>>>>>>>>>>> MAC=e4:be:ed:04:95:ca:b0:7f:b9:af:f1:db:86:dd >>>>>>>>>>>>> SRC=2607:f8b0:4002:0c07:0000:0000:0000:005f >>>>>>>>>>>>> DST=2600:8807:c007:d200:39b7:9792:f36e:935d LEN=127 TC=0 >>>>>>>>>>>>> HOPLIMIT=47 FLOWLBL=624562 PROTO=TCP SPT=443 DPT=48738 WINDOW=207 RES=0x00 >>>>>>>>>>>>> ACK PSH URGP=0 >>>>>>>>>>>>> [ 98.607223] ieee80211 phy0: rt2x00queue_flush_queue: >>>>>>>>>>>>> Warning - Queue 1 failed to flush >>>>>>>>>>>>> [ 99.119249] ieee80211 phy0: rt2x00queue_flush_queue: >>>>>>>>>>>>> Warning - Queue 2 failed to flush >>>>>>>>>>>>> [ 99.631233] ieee80211 phy0: rt2x00queue_flush_queue: >>>>>>>>>>>>> Warning - Queue 1 failed to flush >>>>>>>>>>>>> [ 100.751253] ieee80211 phy0: rt2x00queue_flush_queue: >>>>>>>>>>>>> Warning - Queue 1 failed to flush >>>>>>>>>>>>> [ 101.575244] ieee80211 phy0: rt2x00queue_flush_queue: >>>>>>>>>>>>> Warning - Queue 1 failed to flush >>>>>>>>>>>>> [ 107.924730] [UFW BLOCK] IN=wlp3s6 OUT= >>>>>>>>>>>>> MAC=e4:be:ed:04:95:ca:b0:7f:b9:af:f1:db:86:dd >>>>>>>>>>>>> SRC=2607:f8b0:4002:0c06:0000:0000:0000:00bd >>>>>>>>>>>>> DST=2600:8807:c007:d200:39b7:9792:f36e:935d LEN=123 TC=0 >>>>>>>>>>>>> HOPLIMIT=49 FLOWLBL=719850 PROTO=TCP SPT=443 DPT=60286 WINDOW=803 RES=0x00 >>>>>>>>>>>>> ACK PSH URGP=0 >>>>>>>>>>>>> [ 121.012584] [UFW BLOCK] IN=wlp3s6 OUT= >>>>>>>>>>>>> MAC=01:00:5e:00:00:01:b0:7f:b9:af:f1:db:08:00 SRC=192.168.0.1 >>>>>>>>>>>>> DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 >>>>>>>>>>>>> [ 121.014359] [UFW BLOCK] IN=wlp3s6 OUT= >>>>>>>>>>>>> MAC=01:00:5e:00:00:01:b0:7f:b9:af:f1:db:08:00 SRC=192.168.0.1 >>>>>>>>>>>>> DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 >>>>>>>>>>>>> [ 128.885933] [UFW BLOCK] IN=wlp3s6 OUT= >>>>>>>>>>>>> MAC=e4:be:ed:04:95:ca:b0:7f:b9:af:f1:db:86:dd >>>>>>>>>>>>> SRC=2607:f8b0:4002:080a:0000:0000:0000:200e >>>>>>>>>>>>> DST=2600:8807:c007:d200:39b7:9792:f36e:935d LEN=127 TC=0 >>>>>>>>>>>>> HOPLIMIT=60 FLOWLBL=306771 PROTO=TCP SPT=443 DPT=50348 WINDOW=805 RES=0x00 >>>>>>>>>>>>> ACK PSH URGP=0 >>>>>>>>>>>>> [ 141.538155] ieee80211 phy0: rt2x00queue_flush_queue: >>>>>>>>>>>>> Warning - Queue 2 failed to flush >>>>>>>>>>>>> [ 143.058037] ieee80211 phy0: rt2x00queue_flush_queue: >>>>>>>>>>>>> Warning - Queue 2 failed to flush >>>>>>>>>>>>> [ 144.217983] ieee80211 phy0: rt2x00queue_flush_queue: >>>>>>>>>>>>> Warning - Queue 2 failed to flush >>>>>>>>>>>>> [ 146.714197] [UFW BLOCK] IN=wlp3s6 OUT= >>>>>>>>>>>>> MAC=e4:be:ed:04:95:ca:b0:7f:b9:af:f1:db:86:dd >>>>>>>>>>>>> SRC=2607:f8b0:4002:0c06:0000:0000:0000:00bc >>>>>>>>>>>>> DST=2600:8807:c007:d200:39b7:9792:f36e:935d LEN=396 TC=0 >>>>>>>>>>>>> HOPLIMIT=49 FLOWLBL=1036755 PROTO=TCP SPT=5228 DPT=50620 WINDOW=186 >>>>>>>>>>>>> RES=0x00 ACK PSH URGP=0 >>>>>>>>>>>>> [ 155.260641] [UFW BLOCK] IN=wlp3s6 OUT= >>>>>>>>>>>>> MAC=e4:be:ed:04:95:ca:78:45:61:24:98:dc:08:00 SRC=192.168.0.3 >>>>>>>>>>>>> DST=192.168.0.9 LEN=363 TOS=0x00 PREC=0x00 TTL=64 ID=34450 DF PROTO=UDP >>>>>>>>>>>>> SPT=1900 DPT=41602 LEN=343 >>>>>>>>>>>>> [ 156.283206] [UFW BLOCK] IN=wlp3s6 OUT= >>>>>>>>>>>>> MAC=e4:be:ed:04:95:ca:78:45:61:24:98:dc:08:00 SRC=192.168.0.3 >>>>>>>>>>>>> DST=192.168.0.9 LEN=363 TOS=0x00 PREC=0x00 TTL=64 ID=34451 DF PROTO=UDP >>>>>>>>>>>>> SPT=1900 DPT=41602 LEN=343 >>>>>>>>>>>>> [ 157.205647] [UFW BLOCK] IN=wlp3s6 OUT= >>>>>>>>>>>>> MAC=e4:be:ed:04:95:ca:78:45:61:24:98:dc:08:00 SRC=192.168.0.3 >>>>>>>>>>>>> DST=192.168.0.9 LEN=363 TOS=0x00 PREC=0x00 TTL=64 ID=34452 DF PROTO=UDP >>>>>>>>>>>>> SPT=1900 DPT=41602 LEN=343 >>>>>>>>>>>>> [ 158.228642] [UFW BLOCK] IN=wlp3s6 OUT= >>>>>>>>>>>>> MAC=e4:be:ed:04:95:ca:78:45:61:24:98:dc:08:00 SRC=192.168.0.3 >>>>>>>>>>>>> DST=192.168.0.9 LEN=363 TOS=0x00 PREC=0x00 TTL=64 ID=34453 DF PROTO=UDP >>>>>>>>>>>>> SPT=1900 DPT=41602 LEN=343 >>>>>>>>>>>>> [ 171.230130] [UFW BLOCK] IN=wlp3s6 OUT= >>>>>>>>>>>>> MAC=e4:be:ed:04:95:ca:b0:7f:b9:af:f1:db:86:dd >>>>>>>>>>>>> SRC=2607:f8b0:4002:0811:0000:0000:0000:200e >>>>>>>>>>>>> DST=2600:8807:c007:d200:39b7:9792:f36e:935d LEN=127 TC=0 >>>>>>>>>>>>> HOPLIMIT=59 FLOWLBL=84030 PROTO=TCP SPT=443 DPT=33268 WINDOW=473 RES=0x00 >>>>>>>>>>>>> ACK PSH URGP=0 >>>>>>>>>>>>> [ 195.644378] [UFW BLOCK] IN=wlp3s6 OUT= >>>>>>>>>>>>> MAC=e4:be:ed:04:95:ca:b0:7f:b9:af:f1:db:86:dd >>>>>>>>>>>>> SRC=2607:f8b0:4002:080a:0000:0000:0000:2003 >>>>>>>>>>>>> DST=2600:8807:c007:d200:39b7:9792:f36e:935d LEN=127 TC=0 >>>>>>>>>>>>> HOPLIMIT=60 FLOWLBL=215363 PROTO=TCP SPT=443 DPT=35348 WINDOW=127 RES=0x00 >>>>>>>>>>>>> ACK PSH URGP=0 >>>>>>>>>>>>> >>>>>>>>>>>>> What are all of these ufw blocks? Could that be causing the >>>>>>>>>>>>> problem? >>>>>>>>>>>>> $ gedit /var/log/syslog could pinpoint the time better. I got >>>>>>>>>>>>> a bunch of 'failed to flush' errors (whatever that means >>>>>>>>>>>>> >>>>>>>>>>>>> Nov 13 05:13:36 MikesBeast kernel: [ 1223.596512] ieee80211 >>>>>>>>>>>>> phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush >>>>>>>>>>>>> Nov 13 05:13:36 MikesBeast kernel: [ 1224.044516] ieee80211 >>>>>>>>>>>>> phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush >>>>>>>>>>>>> Nov 13 05:13:37 MikesBeast kernel: [ 1224.556487] ieee80211 >>>>>>>>>>>>> phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush >>>>>>>>>>>>> Nov 13 05:13:38 MikesBeast kernel: [ 1225.404496] ieee80211 >>>>>>>>>>>>> phy0: rt2x00queue_flush_queue: Warning - Queue 1 failed to flush >>>>>>>>>>>>> Nov 13 05:13:38 MikesBeast kernel: [ 1225.852530] ieee80211 >>>>>>>>>>>>> phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush >>>>>>>>>>>>> Nov 13 05:13:39 MikesBeast kernel: [ 1226.300515] ieee80211 >>>>>>>>>>>>> phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush >>>>>>>>>>>>> Nov 13 05:13:40 MikesBeast kernel: [ 1227.124469] ieee80211 >>>>>>>>>>>>> phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush >>>>>>>>>>>>> Nov 13 05:15:36 MikesBeast kernel: [ 1343.596206] ieee80211 >>>>>>>>>>>>> phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush >>>>>>>>>>>>> Nov 13 05:15:36 MikesBeast kernel: [ 1344.044183] ieee80211 >>>>>>>>>>>>> phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush >>>>>>>>>>>>> Nov 13 05:15:37 MikesBeast kernel: [ 1344.556190] ieee80211 >>>>>>>>>>>>> phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush >>>>>>>>>>>>> Nov 13 05:15:38 MikesBeast kernel: [ 1345.740173] ieee80211 >>>>>>>>>>>>> phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush >>>>>>>>>>>>> Nov 13 05:15:39 MikesBeast kernel: [ 1346.240181] ieee80211 >>>>>>>>>>>>> phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush >>>>>>>>>>>>> Nov 13 05:17:01 MikesBeast CRON[5382]: (root) CMD ( cd / && >>>>>>>>>>>>> run-parts --report /etc/cron.hourly) >>>>>>>>>>>>> Nov 13 05:17:38 MikesBeast kernel: [ 1465.211830] ieee80211 >>>>>>>>>>>>> phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush >>>>>>>>>>>>> Nov 13 05:17:38 MikesBeast kernel: [ 1465.711828] ieee80211 >>>>>>>>>>>>> phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush >>>>>>>>>>>>> Nov 13 05:17:39 MikesBeast kernel: [ 1466.211827] ieee80211 >>>>>>>>>>>>> phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush >>>>>>>>>>>>> Nov 13 05:19:37 MikesBeast kernel: [ 1584.543436] ieee80211 >>>>>>>>>>>>> phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush >>>>>>>>>>>>> Nov 13 05:19:38 MikesBeast kernel: [ 1586.039422] ieee80211 >>>>>>>>>>>>> phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush >>>>>>>>>>>>> Nov 13 05:19:41 MikesBeast dhclient[1664]: DHCPREQUEST of >>>>>>>>>>>>> 192.168.0.9 on wlp3s6 to 192.168.0.1 port 67 (xid=0x5da5416b) >>>>>>>>>>>>> Nov 13 05:19:43 MikesBeast dhclient[1664]: DHCPACK of >>>>>>>>>>>>> 192.168.0.9 from 192.168.0.1 >>>>>>>>>>>>> Nov 13 05:19:43 MikesBeast NetworkManager[1111]: >>>>>>>>>>>>> [1510568383.1866] dhcp4 (wlp3s6): address 192.168.0.9 >>>>>>>>>>>>> Nov 13 05:19:43 MikesBeast NetworkManager[1111]: >>>>>>>>>>>>> [1510568383.1867] dhcp4 (wlp3s6): plen 24 (255.255.255.0) >>>>>>>>>>>>> Nov 13 05:19:43 MikesBeast NetworkManager[1111]: >>>>>>>>>>>>> [1510568383.1867] dhcp4 (wlp3s6): gateway 192.168.0.1 >>>>>>>>>>>>> Nov 13 05:19:43 MikesBeast NetworkManager[1111]: >>>>>>>>>>>>> [1510568383.1867] dhcp4 (wlp3s6): server identifier 192.168.0.1 >>>>>>>>>>>>> Nov 13 05:19:43 MikesBeast NetworkManager[1111]: >>>>>>>>>>>>> [1510568383.1867] dhcp4 (wlp3s6): lease time 3600 >>>>>>>>>>>>> Nov 13 05:19:43 MikesBeast dbus[1079]: [system] Activating via >>>>>>>>>>>>> systemd: service name='org.freedesktop.nm_dispatcher' >>>>>>>>>>>>> unit='dbus-org.freedesktop.nm-dispatcher.service' >>>>>>>>>>>>> Nov 13 05:19:43 MikesBeast NetworkManager[1111]: >>>>>>>>>>>>> [1510568383.1867] dhcp4 (wlp3s6): nameserver '68.105.28.11' >>>>>>>>>>>>> Nov 13 05:19:43 MikesBeast NetworkManager[1111]: >>>>>>>>>>>>> [1510568383.1867] dhcp4 (wlp3s6): nameserver '68.105.29.11' >>>>>>>>>>>>> Nov 13 05:19:43 MikesBeast NetworkManager[1111]: >>>>>>>>>>>>> [1510568383.1867] dhcp4 (wlp3s6): nameserver '68.105.28.12' >>>>>>>>>>>>> Nov 13 05:19:43 MikesBeast NetworkManager[1111]: >>>>>>>>>>>>> [1510568383.1868] dhcp4 (wlp3s6): state changed bound -> bound >>>>>>>>>>>>> Nov 13 05:19:43 MikesBeast systemd[1]: Starting Network >>>>>>>>>>>>> Manager Script Dispatcher Service... >>>>>>>>>>>>> Nov 13 05:19:43 MikesBeast dhclient[1664]: bound to >>>>>>>>>>>>> 192.168.0.9 -- renewal in 1749 seconds. >>>>>>>>>>>>> Nov 13 05:19:43 MikesBeast dbus[1079]: [system] Successfully >>>>>>>>>>>>> activated service 'org.freedesktop.nm_dispatcher' >>>>>>>>>>>>> Nov 13 05:19:43 MikesBeast systemd[1]: Started Network Manager >>>>>>>>>>>>> Script Dispatcher Service. >>>>>>>>>>>>> Nov 13 05:19:43 MikesBeast nm-dispatcher: req:1 'dhcp4-change' >>>>>>>>>>>>> [wlp3s6]: new request (2 scripts) >>>>>>>>>>>>> Nov 13 05:19:43 MikesBeast nm-dispatcher: req:1 'dhcp4-change' >>>>>>>>>>>>> [wlp3s6]: start running ordered scripts... >>>>>>>>>>>>> Nov 13 05:23:32 MikesBeast ntpd[2333]: 23.239.24.67 local addr >>>>>>>>>>>>> 192.168.0.9 -> >>>>>>>>>>>>> Nov 13 05:23:36 MikesBeast kernel: [ 1823.594646] ieee80211 >>>>>>>>>>>>> phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush >>>>>>>>>>>>> Nov 13 05:23:38 MikesBeast kernel: [ 1825.386631] ieee80211 >>>>>>>>>>>>> phy0: rt2x00queue_flush_queue: Warning - Queue 1 failed to flush >>>>>>>>>>>>> Nov 13 05:23:39 MikesBeast kernel: [ 1826.210611] ieee80211 >>>>>>>>>>>>> phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush >>>>>>>>>>>>> Nov 13 05:25:36 MikesBeast kernel: [ 1943.598219] ieee80211 >>>>>>>>>>>>> phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush >>>>>>>>>>>>> Nov 13 05:25:36 MikesBeast kernel: [ 1944.046216] ieee80211 >>>>>>>>>>>>> phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush >>>>>>>>>>>>> Nov 13 05:25:39 MikesBeast kernel: [ 1946.214203] ieee80211 >>>>>>>>>>>>> phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush >>>>>>>>>>>>> >>>>>>>>>>>>> as for /var/log/messages that file does not exist. >>>>>>>>>>>>> >>>>>>>>>>>>> -- >>>>>>>>>>>>> :-)~MIKE~(-: >>>>>>>>>>>>> >>>>>>>>>>>>> --------------------------------------------------- >>>>>>>>>>>>> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org >>>>>>>>>>>>> To subscribe, unsubscribe, or to change your mail settings: >>>>>>>>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>>>>> A mouse trap, placed on top of your alarm clock, will prevent >>>>>>>>>>>> you from rolling over and going back to sleep after you hit the snooze >>>>>>>>>>>> button. >>>>>>>>>>>> >>>>>>>>>>>> Stephen >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> --------------------------------------------------- >>>>>>>>>>>> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org >>>>>>>>>>>> To subscribe, unsubscribe, or to change your mail settings: >>>>>>>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>>>> :-)~MIKE~(-: >>>>>>>>>>> >>>>>>>>>>> --------------------------------------------------- >>>>>>>>>>> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org >>>>>>>>>>> To subscribe, unsubscribe, or to change your mail settings: >>>>>>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> --------------------------------------------------- >>>>>>>>>> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org >>>>>>>>>> To subscribe, unsubscribe, or to change your mail settings: >>>>>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss >>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> -- >>>>>>>>> :-)~MIKE~(-: >>>>>>>>> >>>>>>>>> --------------------------------------------------- >>>>>>>>> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org >>>>>>>>> To subscribe, unsubscribe, or to change your mail settings: >>>>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> --------------------------------------------------- >>>>>>>> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org >>>>>>>> To subscribe, unsubscribe, or to change your mail settings: >>>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss >>>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> :-)~MIKE~(-: >>>>>>> >>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> :-)~MIKE~(-: >>>>>> >>>>>> --------------------------------------------------- >>>>>> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org >>>>>> To subscribe, unsubscribe, or to change your mail settings: >>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss >>>>>> >>>>> >>>>> >>>>> >>>>> -- >>>>> A mouse trap, placed on top of your alarm clock, will prevent you from >>>>> rolling over and going back to sleep after you hit the snooze button. >>>>> >>>>> Stephen >>>>> >>>>> >>>>> --------------------------------------------------- >>>>> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org >>>>> To subscribe, unsubscribe, or to change your mail settings: >>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss >>>>> >>>> >>>> >>>> >>>> -- >>>> :-)~MIKE~(-: >>>> >>>> --------------------------------------------------- >>>> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org >>>> To subscribe, unsubscribe, or to change your mail settings: >>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss >>>> >>> >>> >>> >>> -- >>> A mouse trap, placed on top of your alarm clock, will prevent you from >>> rolling over and going back to sleep after you hit the snooze button. >>> >>> Stephen >>> >>> >>> --------------------------------------------------- >>> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org >>> To subscribe, unsubscribe, or to change your mail settings: >>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss >>> >> >> >> >> -- >> :-)~MIKE~(-: >> >> --------------------------------------------------- >> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org >> To subscribe, unsubscribe, or to change your mail settings: >> http://lists.phxlinux.org/mailman/listinfo/plug-discuss >> > > > --------------------------------------------------- > PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org > To subscribe, unsubscribe, or to change your mail settings: > http://lists.phxlinux.org/mailman/listinfo/plug-discuss > -- :-)~MIKE~(-: