nope.... that did not seem to do anything: bmike1@MikesBeast ~ $ modprobe k10temp bmike1@MikesBeast ~ $ sensors radeon-pci-0100 Adapter: PCI adapter temp1: +66.0°C it8718-isa-0228 Adapter: ISA adapter in0: +1.46 V (min = +0.00 V, max = +4.08 V) in1: +1.94 V (min = +0.00 V, max = +4.08 V) in2: +3.25 V (min = +0.00 V, max = +4.08 V) +5V: +2.99 V (min = +0.00 V, max = +4.08 V) in4: +3.10 V (min = +0.00 V, max = +4.08 V) in5: +3.25 V (min = +0.00 V, max = +4.08 V) in6: +4.08 V (min = +0.00 V, max = +4.08 V) in7: +2.35 V (min = +0.00 V, max = +4.08 V) Vbat: +3.15 V fan1: 3139 RPM (min = 0 RPM) fan2: 0 RPM (min = 0 RPM) fan3: 0 RPM (min = 0 RPM) fan5: 0 RPM (min = 0 RPM) temp1: +35.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor temp2: +51.0°C (low = +127.0°C, high = +127.0°C) sensor = thermal diode temp3: +52.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor cpu0_vid: +1.050 V intrusion0: ALARM k10temp-pci-00c3 Adapter: PCI adapter temp1: +48.8°C (high = +70.0°C) (crit = +72.0°C, hyst = +70.0°C) bmike1@MikesBeast ~ $ Cool.... I do have a video card after all! On Thu, Nov 2, 2017 at 5:19 PM, Jerry Snitselaar wrote: > On Wed Nov 01 17, Michael wrote: > >> so what command do I execute to utilize the probe? >> >> > modprobe k10temp > > and then check the output of the sensors command > > > On Tue, Oct 31, 2017 at 8:58 PM, Michael wrote: >> >> it is there: >>> $ modinfo k10temp >>> filename: /lib/modules/4.4.0-53-generic/kernel/drivers/hwmon/ >>> k10temp.ko >>> license: GPL >>> author: Clemens Ladisch >>> description: AMD Family 10h+ CPU core temperature monitor >>> srcversion: 4BBE5D56D6917F9D3D415AA >>> alias: pci:v00001022d00001583sv*sd*bc*sc*i* >>> alias: pci:v00001022d00001533sv*sd*bc*sc*i* >>> alias: pci:v00001022d00001573sv*sd*bc*sc*i* >>> alias: pci:v00001022d0000141Dsv*sd*bc*sc*i* >>> alias: pci:v00001022d00001403sv*sd*bc*sc*i* >>> alias: pci:v00001022d00001603sv*sd*bc*sc*i* >>> alias: pci:v00001022d00001703sv*sd*bc*sc*i* >>> alias: pci:v00001022d00001303sv*sd*bc*sc*i* >>> alias: pci:v00001022d00001203sv*sd*bc*sc*i* >>> depends: >>> intree: Y >>> vermagic: 4.4.0-53-generic SMP mod_unload modversions >>> parm: force:force loading on processors with erratum 319 (bool) >>> >>> >>> On Tue, Oct 31, 2017 at 4:44 PM, Jerry Snitselaar >>> wrote: >>> >>> On Tue Oct 31 17, Michael wrote: >>>> >>>> Sorry to say but yes it is. >>>>> >>>>> $ lscpu >>>>> Architecture: x86_64 >>>>> CPU op-mode(s): 32-bit, 64-bit >>>>> Byte Order: Little Endian >>>>> CPU(s): 4 >>>>> On-line CPU(s) list: 0-3 >>>>> Thread(s) per core: 1 >>>>> Core(s) per socket: 4 >>>>> Socket(s): 1 >>>>> NUMA node(s): 1 >>>>> Vendor ID: AuthenticAMD >>>>> CPU family: 16 >>>>> Model: 5 >>>>> Model name: AMD Athlon(tm) II X4 620 Processor >>>>> Stepping: 2 >>>>> CPU MHz: 1400.000 >>>>> CPU max MHz: 2600.0000 >>>>> CPU min MHz: 800.0000 >>>>> BogoMIPS: 5223.39 >>>>> Virtualization: AMD-V >>>>> L1d cache: 64K >>>>> L1i cache: 64K >>>>> L2 cache: 512K >>>>> NUMA node0 CPU(s): 0-3 >>>>> Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr >>>>> pge >>>>> mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext >>>>> fxsr_opt >>>>> pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc >>>>> extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic >>>>> cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt >>>>> hw_pstate vmmcall npt lbrv svm_lock nrip_save >>>>> >>>>> After looking further into this I found something . Do you >>>>> think I >>>>> should compile it? >>>>> Date Fri, 20 Nov 2009 09:15:23 +0100 >>>>> From Clemens Ladisch <> >>>>> Subject [PATCH] k10temp: temperature sensor for AMD Family 10h/11h CPUs >>>>> >>>>> >>>>> The k10temp driver has been in the kernel since 2.6.33. look at the >>>> config for >>>> your kernel to see if CONFIG_SENSORS_K10TEMP is there. I imagine your >>>> kernel >>>> already has the moduile built, unless you have been building your own. >>>> >>>> try 'modinfo k10temp' and see if it is there already. >>>> >>>> >>>> --------------------------------------------------- >>>> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org >>>> To subscribe, unsubscribe, or to change your mail settings: >>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss >>>> >>>> >>> >>> >>> -- >>> :-)~MIKE~(-: >>> >>> >> >> >> -- >> :-)~MIKE~(-: >> > -- :-)~MIKE~(-: