tried running the scripts you provided, I get the message "device enp0s3 is already a member of a bridge; can't enslave it to bridge br0" So, I am pretty sure the issue lies with my Windows machine or my Linksys settings. In actuality, its probably my Windows machine because I once had Bridged networking working with my current Linksys settings. On Wed, Feb 4, 2015 at 10:20 AM, Todd Millecam wrote: > Might be helpful to start from square one. > > First thing you need to determine is if wireshark will work on your > wifi--if it does then continue. If it doesn't, then it only worked at > starbucks because they have a wonkey setup where they're intentionally > trying to capture all the internet traffic that goes through there. > > Here are the exact commands I use to setup a bridged interface manually on > a systemd system using ip (as opposed to the old ifconfig), just swap out > my ethernet ens32 for your enp0p3 > > ]$ ip link add name br0 type bridge > ]$ ip link set dev br0 up > ]$ ip link set dev ens32 promisc on > ]$ ip link set dev ens32 down && ip link set dev ens32 up > ]$ ip link set dev ens32 master br0 #lose connection here > ]$ modprobe tun > ]$ ip tuntap add tap0 mode tap > ]$ brctl addif br0 ens32 > ]$ brctl addif br0 tap0 > ]$ dhcpcd -k > ]$ dhcpcd br0 > ]$ ping google.com > > If ping works, then you're setup and have a tap0 interface ready to go for > your VM. > > On Wed, Feb 4, 2015 at 9:19 AM, sean wrote: > >> Are you sure that it was bridged at Starbucks and not nat'd? What's the >> wifi chip? Not all have support for being bridged. >> On Feb 4, 2015 9:09 AM, "Michael Torres" wrote: >> >>> Yes it has both ...its a laptop. I hear what your saying but i have a >>> hard time wrapping my head around the fact that my wireless card will >>> communicate with starbucks router..but not mine. I am going to try and >>> reconfigure. My linksys router.... i have to factory reset it as i forgot >>> the password. >>> On Feb 4, 2015 8:36 AM, "Michael Butash" wrote: >>> >>>> I don't use Cent ever, but if it's anything like Ubuntu, you get either >>>> a) network interfaces file ala sysconfig scripts in rh derivatives or b) >>>> NetworkManager controlling everything, but not both. If NM is running your >>>> stack, than it's likely ignoring those configurations as it contains all >>>> that in dbus and /etc/NetworkManager or like. >>>> >>>> If that is a wireless nic, I still think the wireless isn't giving you >>>> another address, and likely won't in all cases. Reason is typically >>>> wireless is meant to have a single client per security association. This >>>> is usually controllable to some aspect. There's a reason to prevent this - >>>> someone bridging their laptop to strong encrypted wireless, and >>>> representing it via old wep or like I can crack with my phone. Might work >>>> at home, but don't always expect that to work in more strict environments. >>>> >>>> Does the system have a wired nic on it? Have you tested with that? >>>> >>>> If you want to see the transaction, "tcpdump -i enp0s3 port 67 or port >>>> 68" that "outside" interface and see if you see the dhcp packet leave the >>>> wireless. If you get no response, your router/ap doesn't like another >>>> request. If not leaving that interface, it's a local system issue. >>>> >>>> Packets on the wire trump all, see if there are any. >>>> >>>> -mb >>>> >>>> >>>> On 02/04/2015 01:07 AM, Michael Torres wrote: >>>> >>>>> I didnt think that was the reason. just for the simple fact that I >>>>> was connected wirelessly at Starbucks......their router assigned me an IP >>>>> address using the enp0s3 file. >>>>> >>>>> anyways, I removed the device and reinstalled, still the same thing. >>>>> I still think its a setting in my router or perhaps Windows strikes again >>>>> and there is something in the Network Manager that I dont understand. >>>>> >>>>> How frustrating.....anyways, thanks for the help, if you think of >>>>> anything else, please let me know. >>>>> >>>>> Going to bed now.. >>>>> >>>>> >>>> --------------------------------------------------- >>>> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org >>>> To subscribe, unsubscribe, or to change your mail settings: >>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss >>>> >>> >>> --------------------------------------------------- >>> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org >>> To subscribe, unsubscribe, or to change your mail settings: >>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss >>> >> >> --------------------------------------------------- >> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org >> To subscribe, unsubscribe, or to change your mail settings: >> http://lists.phxlinux.org/mailman/listinfo/plug-discuss >> > > > > -- > Todd Millecam > > --------------------------------------------------- > PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org > To subscribe, unsubscribe, or to change your mail settings: > http://lists.phxlinux.org/mailman/listinfo/plug-discuss >