On Sun, Mar 13, 2011 at 6:49 PM, Bryan O'Neal < Bryan.ONeal@theonealandassociates.com> wrote: > Ok - school me - what benefit would I get from flashing my cable modem? > > Wait! Scratch head! Because you can? Here's my current cable modem (without diagnostics) DOCSIS 1.0. http://98.165.44.173/ Oh, no seriously, replacing any manufacturer firmware with upgraded versions always improves it. ....And because various diagnostic features and functions become available to you, like speed tools, since you have essentially "opened up" some of the bandwidth limitations throttled at the cable modem level. See: http://www.phx2600.org/forum-archive/viewtopic.php?p=5086&sid=fd4a9eb61f8470a62ea8e148e67ba867(referencing speed, etc) Excerpt: Different firmwares provide different features and a different feel, as well. It would be best for you to scroll through http://www.sbhacker.net/forum/ and look at all the different firmware there are and find one for you. Some different firmwares are: Original Sigma firmware - Supports DOCSIS 1.0 and many modems. If your ISP only supports DOCSIS1.1 and above this is not for you. Sigma X2 - There are many versions of this firmware floating around and it supports a decent number of modems. Also note, when many connections are used at once (like bit torrent) this firmware tends to crash on most modems. If you're looking for stability imho this isn't for you unless you want to upgrade the memory on the modem. FERCSA Sigma X2 - A popular version of Sigma X2. The red on black firmware looks awful. :P Haxorware - Newer firmware that seems to be getting a lot of attention. Arguably the best firmware to date for any cable modem. SB5100Mod - Newer firmware that had wonderful development for a short amount of time but now looks discontinued. (Only the future will will really tell.) This is probably the best firmware on the sb5100. Now that you've found what cable modem you want to buy another question pops up, "Should I buy a pre modded modem?" If you've never soldered anything before then the answer is probably yes. Compare prices between pre modded and not modded + soldering kit + items to make a JTAG cable. To purchase a premod modem visit www.sbhacker.net ------------------------------------------------------------------------- USING THE FIRMWARE This can vary greatly depending on what firmware you're using. Because of this, this section will be a list of terminology and will be firmware independent. This way if you find an option in your firmware and you don't know what it is this section can help you regardless what setup you have. Connecting to your firmware: http://192.168.100.1 This is the default modem firmware. sb5100mod is http://192.168.100.1:666 Sigma based firmware and most everything else is http://192.168.100.1:1337 Downstream/Upstream Frequency - The areas in the coaxial cable used to connect to the ISP. Think of it like FM radio. The range for FM is 87.5 to 108.0. "What frequency is such-en-such radio station on?" Coaxial cables work the same way. Signal to Noise Ratio - Anything above 30dB is good. The lower the number the less signal and the more noise. Downstream Power Level - Anything from 10 to -10 is good but generally connection can be obtained from 15 to -15. If your connection level is lower than -10. Channel ID - Just like cable TV, cable internet has channels. If you're in a congested bandwidth area (during certain times of the day your internet slows down) then it might just be an over used channel. Switching to another channel can sometimes have surprising benefits. Upstream power level - Anything below 50dBmV is good. Most ISPs aim for low or mid 40s. This is how loud your cable modem shouts so your ISP can hear it. The max power level a modem is allowed to broadcast at is 58. If your power level is 58 this can be like a death sentence. -If any of your numbers are outside of the ordinary then check out this excellent guide here http://www.sbhacker....showtopic=10528 Serial Number - This is your modems serial number and can be used to trace you. However, it is relatively pointless. When changing your mac address make sure to change the serial number at the same time. HFC MAC Address - This is your modems mac address. It identifies your modem to your isp and ultimately who you are must like a mailing address. Remember to never hack a modem with a mac address tied to you! CPE USB MAC Address - Some cable modems get online via USB instead of ethernet. This can be thought of just like the FC MAC Address. Known CPE MAC Address - This obtains the mac address of the router or computer connected to your cable modem. Your ISP can see this! and therefor it is highly recommended you do not plug in any routers or computers associated with any legit internet into your hacked modem without changing their mac address first! Disable firmware updates - This should most likely be enabled. It restricts your ISP from automatically changing your modems firmware to something legit. Factory Mode - "Factory mode, when enabled, gives you access via snmp to the factory mib. the factory mib is a list of oid's, each oid having a uniq function. Here is a very small list of things you can do remote via snmp when in factory mode, *get/set the hfc, ethernet and usb mac addresses. *get/set the modem serial number. *get/set the modem certs (cm,vendor, and secure code). *ping ip addreses. *execute shell commands *execute injected code (see cmFactoryBCMGroup 'CommandType, AddressOrOpcode, ByteCount and Data')" http://www.sbhacker....hp?showtopic=17 Configuration Page Changeable - This allows you to alter some of the settings on http://192.168.100.1 Reboot Disabler - Some ISPs auto try to reboot modems. This disables that. Enabling this can be extremely helpful. Force Network Access - Gain network access without authorization. Some ISPs might need this. Embedded Telnet Server - When enabled you can log into the modems shell via telnet and type in different advanced commands. If you're on windows check out putty (using google) and try the telnet version of that app. SNMP Deamon - SNMP is a protocol that broadcasts information about your modem to your ISP and anyone who scans for it. Disabling this will remove your ISP from seeing you. I recommend disabling it. SNMP Port - Changing the SNMP broadcast port can generally have the same effect as disabling SNMP. I recommend changing the port. Default is 161. Community String Miner - This helps find the a community string for your ISP. Community strings are used for SNMP scanning. Full Flash Backup - I highly recommend you do this and save the file somewhere so that it will not be lost. If anything bad happens to your modem you can then use this. Disable firmware updates - This should most likely be enabled. It restricts your ISP from automatically changing your modems firmware to something legit. Factory Mode - "Factory mode, when enabled, gives you access via snmp to the factory mib. the factory mib is a list of oid's, each oid having a uniq function. Here is a very small list of things you can do remote via snmp when in factory mode, *get/set the hfc, ethernet and usb mac addresses. *get/set the modem serial number. *get/set the modem certs (cm,vendor, and secure code). *ping ip addreses. *execute shell commands *execute injected code (see cmFactoryBCMGroup 'CommandType, AddressOrOpcode, ByteCount and Data')" http://www.sbhacker....hp?showtopic=17 Configuration Page Changeable - This allows you to alter some of the settings on http://192.168.100.1 Reboot Disabler - Some ISPs auto try to reboot modems. This disables that. Enabling this can be extremely helpful. Force Network Access - Gain network access without authorization. Some ISPs might need this. Embedded Telnet Server - When enabled you can log into the modems shell via telnet and type in different advanced commands. If you're on windows check out putty (using google) and try the telnet version of that app. SNMP Deamon - SNMP is a protocol that broadcasts information about your modem to your ISP and anyone who scans for it. Disabling this will remove your ISP from seeing you. I recommend disabling it. SNMP Port - Changing the SNMP broadcast port can generally have the same effect as disabling SNMP. I recommend changing the port. Default is 161. Community String Miner - This helps find the a community string for your ISP. Community strings are used for SNMP scanning. Full Flash Backup - I highly recommend you do this and save the file somewhere so that it will not be lost. If anything bad happens to your modem you can then use this. CM Certification - This allows you to backup your cert file. I highly recommend you do this and a place that you will not loose it. My hdd fried and I lost some data and my modem fried in the same week. I lost my cert for my modem. Don't let this happen to you! Config file - When your modem turns on it downloads a config file from either a default TFTP server or from one of your choosing. Some firmwares give options to save the config file onto your modem to skip this step. Also, some firmwares allow for downloading and config files. Hardware Changer MAC/Serial - This allows you to change your modems mac and serial. This is quite useful. Firmware / Config Down - This updates the firmware on your modem. Caution! Backup your 2MB flash and certification file before doing this! IP is the STATIC address of your computer you manually setup hosting a TFTP server. Filename is the name of the .bin file for the firmware you're updating. sysDescr - Information given to your ISP about your modem. docsDevSwCurrentVers - Current version of standard firmware (bios) your modem is running. NonVol Config - A file that contains all everything about your modem. This file contains certificates in your modem. ------------------------------------------------------------------------- GETTING ONLINE This step varies drastically depending not only on what ISP you're trying to connect to but what area you live in as well. For example, in some areas comcast supports DOCSIS 1.0/1.1 only and in other areas comcast might support DOCSIS 1.1/2.0 only. Keep this in mind that everyone's situation is unique regardless what ISP you're on. Before getting online I have an important question to ask you, "Do you already have cable internet or/and cable TV?" If you do not then there might be a filter on your coaxial line running into your house, or the wires may not even be plugged in at all. A good page to checkout topic=8143 (on sbhacker.net forums) and make sure nothing physically is obstructing the internets, or series of tubes, running to your house. IMHO you should sign up for legit internet if you haven't already for at least a couple of months if not permanently. Cable internet is a service. If you sign up for internet they will make sure not only that any modem in your house can get online, but your ISP will also make sure the signal is strong enough for the internet to work well. --> End excerpt The newer flashable Motorola SB6120 provides Interface bonding - which makes it scream (when the cable company supports DOCSIS 3.0): http://wn.com/Flashing_SB6120_via_U-Boot > On Sun, Mar 13, 2011 at 5:24 PM, Lisa Kachold wrote: > > SBHacker Surfboard 5100/5101 RoundUp Report: > > > > With a great deal of "can-do attitude" from Kaia Taylor, hardware > expertise > > from Brad Blanette, and equipment provided by Don (not his real name), > our > > HackFesters were able to work with three modems: > > > > 0) Kaia Taylor 5100 {successfully added Lite Version haxorware} > > > > 1) Don's 5101 {successfully flashed but appearing with error (see below)} > > > > 2) Don's 5100 (no JTAG) > > > > I worked more with #1 Motorola Surfboard 5101, reflashed it with diag > > version from here: > > http://www.haxorware.com/ > > > > It says: > > Error: No CFG area Found! > > > > References to AMD Chip SBoards: > > > > > http://www.sbhacker.net/forum/index.php/topic/16152-blackcat-usb-flashes-intel-fine-amd-verification-errors/ > > > > Assumption: Bricked or memory toasted Cable Modem. > > Action: Get $newer model that works before I attempt to flash it? > > > > We will be continuing the Sbhacker games next Saturday at Noon [now that > we > > know how to do it more or less] over at Gangplankhq.com, so bring your > cable > > modems! > > -- > > Office: (480)307-8712 > > AT&T: (503)754-4452 > > > > lkachold@incentivelogic.com > > > > Senior Systems Administration > > SOMEPLACE REALLY Good > > > > "The war of good and evil present in all religions does not always end, > in > > every faith, with the victory of good, but in every one it establishes a > > clear order of existence. The sacred as well as the profane rests on that > > universal order.." > > --Stanislav Lem > > > > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------- > > PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us > > To subscribe, unsubscribe, or to change your mail settings: > > http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss > > > --------------------------------------------------- > PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us > To subscribe, unsubscribe, or to change your mail settings: > http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss > -- (503) 754-4452 iPhone (623) 239-3392 Skype (623) 688-3392 Google Voice http://www.obnosis.com Senior Systems Administrator IncentiveLogic,com *Catch My MetaSploit & IP CAM Surveillance Presentations @ ABLEConf.com in April!*