Don't see any sound card there. What card do you think you have and do you have any reason to believe it works? Try reseating the card or replacing it with another. If this is an old machine, verify the sound card is not in an ISA slot (longer with fewer and fatter connections) rather than a PCI slot. On 10/29/06, Michael Havens wrote: > > lspci as superuser > > bmike1@0[dev]$ sudo lspci -v > 0000:00:00.0 Host bridge: VIA Technologies, Inc. VT82C598 [Apollo MVP3] > (rev > 04) > Flags: bus master, medium devsel, latency 16 > Memory at d8000000 (32-bit, prefetchable) [size=64M] > Capabilities: [a0] AGP version 1.0 > > 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo > MVP3/Pro133x AGP] (prog-if 00 [Normal decode]) > Flags: bus master, 66MHz, medium devsel, latency 0 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 > Memory behind bridge: dc000000-ddffffff > Prefetchable memory behind bridge: d0000000-d7ffffff > > 0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C586/A/B PCI-to-ISA > [Apollo VP] (rev 47) > Subsystem: VIA Technologies, Inc. MVP3 ISA Bridge > Flags: bus master, stepping, medium devsel, latency 0 > > 0000:00:07.1 IDE interface: VIA Technologies, Inc. > VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if > 8a > [Master SecP PriP]) > Flags: bus master, medium devsel, latency 32 > I/O ports at d000 [size=16] > > 0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > Controller (rev 02) (prog-if 00 [UHCI]) > Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller > Flags: bus master, medium devsel, latency 32, IRQ 11 > I/O ports at d400 [size=32] > > 0000:00:07.3 Host bridge: VIA Technologies, Inc. VT82C586B ACPI (rev 10) > Flags: medium devsel, IRQ 9 > > 0000:00:0a.0 Serial controller: 3Com Corp, Modem Division 56K FaxModem > Model > 5610 (rev 01) (prog-if 02 [16550]) > Subsystem: 3Com Corp, Modem Division: Unknown device 00d3 > Flags: medium devsel, IRQ 11 > I/O ports at d800 [size=8] > Capabilities: [dc] Power Management version 2 > > 0000:00:0b.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet > Pro > 100] (rev 05) > Subsystem: Compaq Computer Corporation NC3121 Fast Ethernet NIC > (WOL) > Flags: bus master, medium devsel, latency 32, IRQ 11 > Memory at df100000 (32-bit, prefetchable) [size=4K] > I/O ports at dc00 [size=32] > Memory at df000000 (32-bit, non-prefetchable) [size=1M] > Expansion ROM at 20000000 [disabled] [size=1M] > Capabilities: [dc] Power Management version 1 > > 0000:00:0c.0 SCSI storage controller: Adaptec AHA-2940U/UW/D / AIC-7881U > Flags: bus master, medium devsel, latency 32, IRQ 11 > I/O ports at e000 [disabled] [size=256] > Memory at df101000 (32-bit, non-prefetchable) [size=4K] > Expansion ROM at 20100000 [disabled] [size=64K] > > 0000:01:00.0 VGA compatible controller: nVidia Corporation NV10 [GeForce > 256 > SDR] (rev 10) (prog-if 00 [VGA]) > Subsystem: Elsa AG Erazor X > Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 10 > Memory at dc000000 (32-bit, non-prefetchable) [size=16M] > Memory at d0000000 (32-bit, prefetchable) [size=128M] > Expansion ROM at dd000000 [disabled] [size=64K] > Capabilities: [60] Power Management version 1 > Capabilities: [44] AGP version 2.0 > > bmike1@0[dev]$ > On Sunday 29 October 2006 9:52 am, Kenneth wrote: > > > but I don't see the sound card in there (not that this means much). > > > Yes, there is a pci soundcard in there. At on point in my 'adventures > > > with linux' I had used the 'Setup ALSA PCI Soundcard' command > > > successfully. I did investigate the man pages for amixer and it > appears > > > to have changed some > > > but when I modified the command it didn't help. > > > > > > Ideas? Proposals? What? > > > > I would start by seeing if the module for the sound card you have is > > loaded. If not, does > > > > modprobe > > > > work? > > > > > > > > > > > ___________________________________________________________________________ > >_________ Want to start your own business? Learn how on Yahoo! Small > > Business (http://smallbusiness.yahoo.com) > > > > --------------------------------------------------- > > PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us > > To subscribe, unsubscribe, or to change you mail settings: > > http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss > --------------------------------------------------- > PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us > To subscribe, unsubscribe, or to change you mail settings: > http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss > -- Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind. - Dr. Seuss