The user needs to be part of the scanner group in order for the scanner 
to be found.

I would guess that while you were adding and removing scanner software, 
one of the the packages removed the scanner group completely and when 
you shutdown the machine it forgot that you were in the group.

Try adding the scanner group to your user and then log out and back in 
again and it should start working

Brian Cluff

On 12/22/2015 12:29 PM, Michael Havens wrote:
> but why did it work before? ,I just shut down, started windows, and then
> restarted into linux!!!!
>
> On Tue, Dec 22, 2015 at 2:28 PM, Michael Havens <bmike1@gmail.com
> <mailto:bmike1@gmail.com>> wrote:
>
>     I found the problem. It seems to be a permissions error!
>
>     man sane-usb
>     This is a short HOWTO-like section. For the full details, read the fol‐
>             lowing  sections.  The  goal  of  this  section  is  to get
>     the scanner
>             detected by sane-find-scanner(1).
>
>             Run sane-find-scanner. If it lists your scanner with the
>     correct vendor
>             and  product  ids, you are done. See section SANE ISSUES for
>     details on
>             how to go on.
>
>             sane-find-scanner doesn't list your scanner? Does it work as
>       root?  If
>             yes, there is a permission issue. See the LIBUSB section for
>     details.
>
>             Nothing  is found even as root? Check that your kernel
>     supports USB and
>             that libusb is installed (see section LIBUSB).
>
>     <edit>
>     LIBUSB
>             SANE  can  only  use libusb 0.1.6 or newer. It needs to be
>     installed at
>             build-time. Modern Linux distributions and other operating
>     systems come
>             with libusb.
>
>             Libusb  can  only access your scanner if it's not claimed by
>     the kernel
>             scanner driver. If you want to use libusb,  unload  the
>       kernel  driver
>             (e.g. rmmod scanner under Linux) or disable the driver when
>     compiling a
>             new kernel. For Linux, your kernel needs support for the USB
>     filesystem
>             (usbfs). For kernels older than 2.4.19, replace "usbfs" with
>     "usbdevfs"
>             because the name has changed. This filesystem must be
>       mounted.  That's
>             done  automatically  at  boot  time, if /etc/fstab contains
>     a line like
>             this:
>
>                    none /proc/bus/usb usbfs defaults  0  0
>
>             The permissions for the device files used by libusb  must
>       be  adjusted
>             for  user  access. Otherwise only root can use SANE devices.
>     For Linux,
>             the devices are located in /proc/bus/usb/ or in
>       /dev/bus/usb,  if  you
>             use  udev.  There  are directories named e.g. "001" (the bus
>     name) con‐
>             taining files "001", "002" etc. (the device files).  The
>       right  device
>             files can be found out by running scanimage -L as root.
>     Setting permis‐
>             sions with "chmod" is not permanent, however. They will be
>     reset  after
>             reboot or replugging the scanner.
>
>     Okay, do I need to make it look like:
>
>                      none /proc/bus/usb usbfs defaults  6   6
>
>     or what do I need to do?
>
>     On Tue, Dec 22, 2015 at 2:10 PM, Michael Havens <bmike1@gmail.com
>     <mailto:bmike1@gmail.com>> wrote:
>
>         I then tried:
>
>           scanimage>test.scn
>           scanimage: no SANE devices found
>
>
>
>
>     --
>     :-)~MIKE~(-:
>
>
>
>
> --
> :-)~MIKE~(-:
>
>
> ---------------------------------------------------
> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org
> To subscribe, unsubscribe, or to change your mail settings:
> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>

---------------------------------------------------
PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org
To subscribe, unsubscribe, or to change your mail settings:
http://lists.phxlinux.org/mailman/listinfo/plug-discuss