Thanks for being willing to send me a distro, Lisa. My address is 3486 E Granite DR Cottonwood, AZ 86326 The last name is Havens Last night a PLUGER and myself were up until 2AM and we determined the drive was toast. Here are a couple of relevant correspondenses: Michael Havens Mon, Nov 14, 2011 at 1:50 AM To: michael@butash.net root@1[hda1]# fdisk -l /dev/hda1 Disk /dev/hda1: 38.3 GB, 38329772544 bytes 16 heads, 63 sectors/track, 74268 cylinders Units = cylinders of 1008 * 512 = 516096 bytes Disk /dev/hda1 doesn't contain a valid partition table root@1[hda1]# ls /dev/hd* /dev/hda /dev/hda1 /dev/hda2 /dev/hda5 /dev/hdc root@1[hda1]# So this seems to indicate that my partiton table has been hosed somehow. Is that all it says? Is it like I can repair the partition table but after I do that I better replace the drive? - Show quoted text - -- :-)~MIKE~(-: Add star Michael Butash Mon, Nov 14, 2011 at 2:26 AM Reply-To: michael@butash.net To: Michael Havens Eww, yeah that's not good. If you had a backup of your geometry (fdisk -l) you could theoretically repartition right over it and just go on with life, assuming the data is there, but I'm thinking it's really not. You're getting into forensics at this point to data recover. On the flip side, i don't know what kind of forensic restore applications might be out there to do this automagically. Not had to (knock on wood). You can pay to have it done, but it is NOT cheap. Best case is you have a backup to move on, worst you will next time. Might need to kick something and move on. On 11/14/11, Lisa Kachold wrote: > The 240 error can happen: > > a) If you are trying to mount the drive in an EXT4 on an EXT2 partition > (journaling is disabled). > b) If you have mounted in EXT4 when using grub. > *c)* If you have a ext4 root and don’t use grub2, you can obtain this > error: > > EXT3-fs: sda1: couldn’t mount because of unsupported optional features (240) > > Add "*rootfstype=ext4*" to the kernel line* or at the grub> line when > specifying the initrd? > > **ARE you CERTAIN you have ext4 and not ext2? > > You can "fdisk -l" to see a list of disks and types.** > * > > Of course, there also is: > > d) Your drive journal is toast as your fsck failed. > > I suggest you boot into either recovery mode or LiveDistro/Knoppix and > manually work on the drive or: > > 0) Boot into recovery mode and follow these instructions. > https://help.ubuntu.com/community/LiveCdRecovery > > if not successful: > > 0) Move off or backup your data. > > 1) Rebuild with new distro version following recovery recommendations: > > I can drop an Ubuntu Live and a knoppix tool distro into the mail for you > today? What is your distro version exactly, please and upgrade choice? > > Contact me offline with your address? > > Other references: > > Fsck: https://help.ubuntu.com/community/SystemAdministration/Fsck > > Booting Ubuntu 10.10 into Recovery Mode: > https://wiki.ubuntu.com/RecoveryMode > > > > On Mon, Nov 14, 2011 at 6:36 AM, kitepilot@kitepilot.com < > kitepilot@kitepilot.com> wrote: > >> I have a problem, I can't download ubuntu with my live cd. >>> >> This is easy to do but I live in the corner of Alabama, Tennessee and >> Georgia (in GA) and it is a fairly long drive (I've done it both ways >> several times) >> I'll be glad to help you over the phone. >> >>> root@1[hda1]# mount /dev/hda1 hda1 >>> >> Type: >> cat /proc/partitions >> You can only mount what shows in that file. >> However: >> >>> [17196389.468000] EXT3-fs: hda1: couldn't mount because of unsupported >>> >> Points to an unrecognizable filesystem. >> Try: >> fsck -N /dev/... >> but: >> mount -o ro /dev/hda1 hda1 >> Sometimes works... >> >>> Is there antway to retreive the data w/o spending any money? >>> >> Yes, I've done it. use (THEY ARE DIFFERENT): >> ddrescue >> (http://www.gnu.org/s/**ddrescue/ddrescue.html) >> or >> dd_rescue >> (http://www.garloff.de/kurt/**linux/ddrescue/ >> ) >> One is "better" than the other but I can't remember which one/why. >> The freezer trick works every time (or most every time anyway... :) >> ET >> PS: As usual, "free advice, you can't sue me! :)" >> YMMV... >> >> Michael Havens writes: >> >>> I have a problem, I can't download ubuntu with my live cd. I live in >>> cottonwood. Does anyone live around here who can copy it for me and >>> I'll drive over to you to get it? Doesn't one of you live on Mingus >>> Mountain? >>> On 11/13/11, Stephen wrote: >>> >>>> http://www.cgsecurity.org/**wiki/TestDiskhas >>>> been useful for me in the past. >>>> On Sun, Nov 13, 2011 at 6:33 PM, Michael Havens >>>> wrote: >>>> >>>>> Is this the right command >>>>> root@1[hda1]# mount /dev/hda1 hda1 >>>>> mount: wrong fs type, bad option, bad superblock on /dev/hda1, >>>>> missing codepage or other error >>>>> In some cases useful info is found in syslog - try >>>>> dmesg | tail or so >>>>> root@1[hda1]# mount /dev/hda1 /mnt/hda1 >>>>> mount: wrong fs type, bad option, bad superblock on /dev/hda1, >>>>> missing codepage or other error >>>>> In some cases useful info is found in syslog - try >>>>> dmesg | tail or so >>>>> root@1[hda1]# dmesg |tail >>>>> [17179619.724000] Adding 1646620k swap on /dev/hda5. Priority:1 >>>>> extents:1 across:1646620k >>>>> [17179621.012000] ACPI: Power Button (FF) [PWRF] >>>>> [17179621.012000] ACPI: Power Button (CM) [PWRB] >>>>> [17179621.248000] ibm_acpi: ec object not found >>>>> [17179621.300000] pcc_acpi: loading... >>>>> [17179621.416000] ACPI: Thermal Zone [THM0] (36 C) >>>>> [17179635.144000] ppdev: user-space parallel port driver >>>>> [17179639.016000] powernow: This module only works with AMD K7 CPUs >>>>> [17196389.468000] EXT3-fs: hda1: couldn't mount because of unsupported >>>>> optional features (240). >>>>> [17196610.992000] EXT3-fs: hda1: couldn't mount because of unsupported >>>>> optional features (240). >>>>> root@1[hda1]# >>>>> Hmm. I am suspecting a crash. I s there antway to retreive the data >>>>> w/o spending any money? >>>>> >>>> >>>> -- >>>> A mouse trap, placed on top of your alarm clock, will prevent you from >>>> rolling over and going back to sleep after you hit the snooze button. >>>> Stephen >>>> ------------------------------**--------------------- >>>> PLUG-discuss mailing list - >>>> PLUG-discuss@lists.plug.**phoenix.az.us >>>> To subscribe, unsubscribe, or to change your mail settings: >>>> http://lists.PLUG.phoenix.az.**us/mailman/listinfo/plug-**discuss >>>> >>> >>> -- >>> :-)~MIKE~(-: >>> ------------------------------**--------------------- >>> PLUG-discuss mailing list - >>> PLUG-discuss@lists.plug.**phoenix.az.us >>> To subscribe, unsubscribe, or to change your mail settings: >>> http://lists.PLUG.phoenix.az.**us/mailman/listinfo/plug-**discuss >>> >> ------------------------------**--------------------- >> PLUG-discuss mailing list - >> PLUG-discuss@lists.plug.**phoenix.az.us >> To subscribe, unsubscribe, or to change your mail settings: >> http://lists.PLUG.phoenix.az.**us/mailman/listinfo/plug-**discuss > > > > > -- > (602) 791-8002 Android > (623) 239-3392 Skype > (623) 688-3392 Google Voice > ** > HomeSmartInternational.com > -- :-)~MIKE~(-: --------------------------------------------------- PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us To subscribe, unsubscribe, or to change your mail settings: http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss