That suggests hardware issue, you try under the "supported" OS yet? On 12/11/08, Jerry Davis wrote: > 0k, tried to write 2x, bad each time. > > tried k3b, which I have used many times before, > > 1. errors on the console: > > jerry@frodo:~$ k3b & > [1] 6298 > jerry@frodo:~$ kbuildsycoca running... > (K3bDevice::HalConnection) initializing HAL >= 0.5 > Mapping udi /org/freedesktop/Hal/devices/storage_model_DVDRAM_GSA_T50L to > device /dev/scd0 > /dev/scd0 resolved to /dev/scd0 > /dev/scd0 is block device (0) > /dev/scd0 seems to be cdrom > bus: 1, id: 0, lun: 0 > (K3bDevice::Device) /dev/scd0: init() > (K3bDevice::Device) /dev/scd0 feature: CD Mastering > (K3bDevice::Device) /dev/scd0 feature: CD Track At Once > (K3bDevice::Device) /dev/scd0 feature: CD-RW Media Write Support > (K3bDevice::Device) /dev/scd0 feature: DVD Read (MMC5) > (K3bDevice::Device) /dev/scd0 feature: DVD+R > (K3bDevice::Device) /dev/scd0 feature: DVD+RW > (K3bDevice::Device) /dev/scd0 feature: DVD+R Double Layer > (K3bDevice::Device) /dev/scd0 feature: DVD-R/-RW Write > (K3bDevice::Device) /dev/scd0 feature: Rigid Restricted Overwrite > (K3bDevice::Device) /dev/scd0 feature: Layer Jump Recording > (K3bDevice::Device) /dev/scd0 unknown profile: 2 > (K3bDevice::Device) /dev/scd0: dataLen: 60 > (K3bDevice::Device) /dev/scd0: checking for TAO > (K3bDevice::Device) /dev/scd0: checking for SAO > (K3bDevice::Device) /dev/scd0: checking for SAO_R96P > (K3bDevice::Device) /dev/scd0: checking for SAO_R96R > (K3bDevice::Device) /dev/scd0: checking for RAW_R16 > (K3bDevice::Device) /dev/scd0: checking for RAW_R96P > (K3bDevice::Device) /dev/scd0: checking for RAW_R96R > (K3bDevice::Device) /dev/scd0: GET PERFORMANCE dataLen = 40 > (K3bDevice::Device) /dev/scd0: GET PERFORMANCE successful with reported > length: 36 > (K3bDevice::Device) /dev/scd0: Number of supported write speeds via GET > PERFORMANCE: 2 > (K3bDevice::Device) /dev/scd0 : 11080 KB/s > (K3bDevice::Device) /dev/scd0 : 5540 KB/s > (K3bDevice::DeviceManager) setting current write speed of device /dev/scd0 > to > 11080 > /dev/scd0 resolved to /dev/scd0 > (K3bDevice::DeviceManager) dev /dev/scd0 already found > (K3bDevice::DeviceManager) found config entry for devicetype: HL-DT-ST > DVDRAM > GSA-T50L > First sec data area: 43:41:33 (LBA 196608) (402653184 > Last sec data area: 554:28:03 (LBA 2495103) (5109970944 Bytes) > Last sec layer 1: 00:00:00 (LBA 0) (0 Bytes) > Layer 1 length: 00:00:01 (LBA 1) (2048 Bytes) > Layer 2 length: 554:28:03 (LBA 2495103) (5109970944 Bytes) > DiskInfo: > Mediatype: DVD-R Sequential > Current Profile: DVD-R Sequential > Disk state: empty > Empty: 1 > Rewritable: 0 > Appendable: 0 > Sessions: 0 > Tracks: 0 > Layers: 1 > Capacity: 510:46:46 (LBA 2298496) (4707319808 Bytes) > Remaining size: 510:46:46 (LBA 2298496) (4707319808 Bytes) > Used Size: 00:00:00 (LBA 0) (0 Bytes) > (K3bDevice::Device) /dev/scd0: GET PERFORMANCE dataLen = 40 > (K3bDevice::Device) /dev/scd0: GET PERFORMANCE successful with reported > length: 36 > (K3bDevice::Device) /dev/scd0: Number of supported write speeds via GET > PERFORMANCE: 2 > (K3bDevice::Device) /dev/scd0 : 11080 KB/s > (K3bDevice::Device) /dev/scd0 : 5540 KB/s > Devices: > ------------------------------ > Blockdevice: /dev/scd0 > Generic device: > Vendor: HL-DT-ST > Description: DVDRAM GSA-T50L > Version: SR04 > Write speed: 11080 > Profiles: DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, > DVD-R > Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, > DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW > Read Cap: DVD-ROM, DVD-R, DVD-R Sequential, DVD-R Dual Layer, DVD-R > Dual > Layer Sequential, DVD-R Dual Layer Jump, DVD-RW, DVD-RW Restricted > Overwrite, > DVD-RW Sequential, DVD+RW, DVD+R, DVD+RW Dual Layer, DVD+R Dual Layer, > CD-ROM, > CD-R, CD-RW > Write Cap: DVD-R, DVD-R Sequential, DVD-R Dual Layer, DVD-R Dual Layer > Sequential, DVD-R Dual Layer Jump, DVD-RW, DVD-RW Restricted Overwrite, > DVD-RW > Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-R, CD-RW > Writing modes: SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, > RAW/R96R, Restricted Overwrite, Layer Jump > Reader aliases: /dev/scd0 > ------------------------------ > (K3bDevice::Device) /dev/scd0: GET CONFIGURATION length det failed. > (K3bDevice::Device) /dev/scd0: GET CONFIGURATION length det failed. > First sec data area: 43:41:33 (LBA 196608) (402653184 > Last sec data area: 554:28:03 (LBA 2495103) (5109970944 Bytes) > Last sec layer 1: 00:00:00 (LBA 0) (0 Bytes) > Layer 1 length: 00:00:01 (LBA 1) (2048 Bytes) > Layer 2 length: 554:28:03 (LBA 2495103) (5109970944 Bytes) > (K3bDevice::Device) /dev/scd0: GET CONFIGURATION length det failed. > (K3bDevice::Device) /dev/scd0: GET PERFORMANCE dataLen = 40 > (K3bDevice::Device) /dev/scd0: GET PERFORMANCE successful with reported > length: 36 > (K3bDevice::Device) /dev/scd0: Number of supported write speeds via GET > PERFORMANCE: 2 > (K3bDevice::Device) /dev/scd0 : 11080 KB/s > (K3bDevice::Device) /dev/scd0 : 5540 KB/s > (K3bDevice::HalConnection) lock queued for > /org/freedesktop/Hal/devices/storage_model_DVDRAM_GSA_T50L > (K3bDevice::HalConnection) unlock queued for > /org/freedesktop/Hal/devices/storage_model_DVDRAM_GSA_T50L > (K3bDevice::ScsiCommand) failed: > command: PREVENT ALLOW MEDIUM REMOVAL (1e) > errorcode: 0 > sense key: NO SENSE (2) > asc: 0 > ascq: 0 > (K3bDevice::ScsiCommand) failed: > command: START STOP UNIT (1b) > errorcode: 0 > sense key: NO SENSE (2) > asc: 0 > ascq: 0 > (K3bDevice::ScsiCommand) failed: > command: START STOP UNIT (1b) > errorcode: 0 > sense key: NO SENSE (2) > asc: 0 > ascq: 0 > Launched ok, pid = 6497 > removing udi /org/freedesktop/Hal/devices/volume_empty_dvd_r > > [1]+ Done k3b > jerry@frodo:~$ > jerry@frodo:~$ ICE default IO error handler doing an exit(), pid = 6494, > errno > = 11 > > > 2. k3b debug output: > > System > ----------------------- > K3b Version: 1.0.5 > > KDE Version: 3.5.10 > QT Version: 3.3.8b > Kernel: 2.6.27-7-generic > Devices > ----------------------- > HL-DT-ST DVDRAM GSA-T50L SR04 (/dev/scd0, ) [CD-R, CD-RW, CD-ROM, DVD-ROM, > DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL] [DVD-ROM, DVD-R > Sequential, > DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW > Restricted > Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, > CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, > Restricted Overwrite, Layer Jump] > > Burned media > ----------------------- > DVD-R Sequential > > K3bIsoImager > ----------------------- > mkisofs print size result: 237 (485376 bytes) > Pipe throughput: 485376 bytes read, 485376 bytes written. > > Used versions > ----------------------- > mkisofs: 1.1.8 > growisofs: 7.1 > > growisofs > ----------------------- > Executing 'builtin_dd if=/dev/fd/0 of=/dev/scd0 obs=32k seek=0' > /dev/scd0: "Current Write Speed" is 8.2x1352KBps. > 0/485376 ( 0.0%) @0x, remaining ??:?? RBU 1.5% UBU 0.0% > 0/485376 ( 0.0%) @0x, remaining ??:?? RBU 1.5% UBU 0.0% > 0/485376 ( 0.0%) @0x, remaining ??:?? RBU 1.5% UBU 0.0% > 0/485376 ( 0.0%) @0x, remaining ??:?? RBU 1.5% UBU 0.0% > 0/485376 ( 0.0%) @0x, remaining ??:?? RBU 1.5% UBU 0.0% > 0/485376 ( 0.0%) @0x, remaining ??:?? RBU 1.5% UBU 0.0% > 0/485376 ( 0.0%) @0x, remaining ??:?? RBU 1.5% UBU 0.0% > 0/485376 ( 0.0%) @0x, remaining ??:?? RBU 1.5% UBU 0.0% > 0/485376 ( 0.0%) @0x, remaining ??:?? RBU 1.5% UBU 0.0% > 0/485376 ( 0.0%) @0x, remaining ??:?? RBU 1.5% UBU 0.0% > 0/485376 ( 0.0%) @0x, remaining ??:?? RBU 1.5% UBU 0.0% > 0/485376 ( 0.0%) @0x, remaining ??:?? RBU 1.5% UBU 0.0% > 0/485376 ( 0.0%) @0x, remaining ??:?? RBU 1.5% UBU 0.0% > 0/485376 ( 0.0%) @0x, remaining ??:?? RBU 1.5% UBU 0.0% > 0/485376 ( 0.0%) @0x, remaining ??:?? RBU 1.5% UBU 0.0% > 0/485376 ( 0.0%) @0x, remaining ??:?? RBU 1.5% UBU 0.0% > 0/485376 ( 0.0%) @0x, remaining ??:?? RBU 1.5% UBU 0.0% > 0/485376 ( 0.0%) @0x, remaining ??:?? RBU 1.5% UBU 0.0% > 0/485376 ( 0.0%) @0x, remaining ??:?? RBU 1.5% UBU 0.0% > 0/485376 ( 0.0%) @0x, remaining ??:?? RBU 1.5% UBU 0.0% > 0/485376 ( 0.0%) @0x, remaining ??:?? RBU 1.5% UBU 0.0% > 0/485376 ( 0.0%) @0x, remaining ??:?? RBU 1.5% UBU 0.0% > 0/485376 ( 0.0%) @0x, remaining ??:?? RBU 1.5% UBU 0.0% > 0/485376 ( 0.0%) @0x, remaining ??:?? RBU 1.5% UBU 0.0% > 0/485376 ( 0.0%) @0x, remaining ??:?? RBU 1.5% UBU 0.0% > 0/485376 ( 0.0%) @0x, remaining ??:?? RBU 1.5% UBU 0.0% > 0/485376 ( 0.0%) @0x, remaining ??:?? RBU 1.5% UBU 0.0% > 0/485376 ( 0.0%) @0x, remaining ??:?? RBU 1.5% UBU 0.0% > 0/485376 ( 0.0%) @0x, remaining ??:?? RBU 1.5% UBU 0.0% > 0/485376 ( 0.0%) @0x, remaining ??:?? RBU 1.5% UBU 0.0% > 0/485376 ( 0.0%) @0x, remaining ??:?? RBU 1.5% UBU 0.0% > 0/485376 ( 0.0%) @0x, remaining ??:?? RBU 1.5% UBU 0.0% > 0/485376 ( 0.0%) @0x, remaining ??:?? RBU 1.5% UBU 0.0% > 0/485376 ( 0.0%) @0x, remaining ??:?? RBU 1.5% UBU 0.0% > 0/485376 ( 0.0%) @0x, remaining ??:?? RBU 1.5% UBU 0.0% > :-[ WRITE@LBA=0h failed with SK=0h/ASC=00h/ACQ=03h]: Input/output error > :-( write failed: Input/output error > > growisofs command: > ----------------------- > /usr/bin/growisofs -Z /dev/scd0=/dev/fd/0 -use-the-force-luke=notray > -use-the- > force-luke=tty -use-the-force-luke=tracksize:237 -speed=8 -use-the-force- > luke=bufsize:32m > > mkisofs > ----------------------- > 237 > I: -input-charset not specified, using utf-8 (detected in locale settings) > Total translation table size: 0 > Total rockridge attributes bytes: 703 > Total directory bytes: 1090 > Path table size(bytes): 10 > Max brk space used 0 > 237 extents written (0 MB) > > mkisofs calculate size command: > ----------------------- > /usr/bin/genisoimage -gui -graft-points -print-size -quiet -volid cox > -volset > -appid K3B THE CD KREATOR (C) 1998-2006 SEBASTIAN TRUEG AND THE K3B TEAM - > publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort > /tmp/kde-jerry/k3bn2DeVa.tmp -rational-rock -hide-list /tmp/kde- > jerry/k3bexHfaa.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde- > jerry/k3bKWW1ic.tmp -no-cache-inodes -full-iso9660-filenames -iso-level 2 - > path-list /tmp/kde-jerry/k3bUlZCPa.tmp > > mkisofs command: > ----------------------- > /usr/bin/genisoimage -gui -graft-points -volid cox -volset -appid K3B THE > CD > KREATOR (C) 1998-2006 SEBASTIAN TRUEG AND THE K3B TEAM -publisher -preparer > > -sysid LINUX -volset-size 1 -volset-seqno 1 -sort > /tmp/kde-jerry/k3bIbdxic.tmp > -rational-rock -hide-list /tmp/kde-jerry/k3bM2DdZb.tmp -joliet -joliet-long > - > hide-joliet-list /tmp/kde-jerry/k3bzOHNBa.tmp -no-cache-inodes > -full-iso9660- > filenames -iso-level 2 -path-list /tmp/kde-jerry/k3bvof1Gb.tmp > > > > > On Thursday 11 December 2008 15:40:27 Jerry Davis wrote: >> blank disc put in. >> /usr/bin/cdrecord is symlinked to wodim >> it was not suid'd (as root), so I did that, and >> ran the command you suggested, >> here is the output, all looks fine to me, so I will try to write. >> >> jerry@frodo:~$ cdrecord -prcap dev=/dev/scd0 >> Device type : Removable CD-ROM >> Version : 5 >> Response Format: 2 >> Capabilities : >> Vendor_info : 'HL-DT-ST' >> Identification : 'DVDRAM GSA-T50L ' >> Revision : 'SR04' >> Device seems to be: Generic mmc2 DVD-R/DVD-RW. >> >> Drive capabilities, per MMC-3 page 2A: >> >> Does read CD-R media >> Does write CD-R media >> Does read CD-RW media >> Does write CD-RW media >> Does read DVD-ROM media >> Does read DVD-R media >> Does write DVD-R media >> Does read DVD-RAM media >> Does write DVD-RAM media >> Does support test writing >> >> Does read Mode 2 Form 1 blocks >> Does read Mode 2 Form 2 blocks >> Does read digital audio blocks >> Does restart non-streamed digital audio reads accurately >> Does support Buffer-Underrun-Free recording >> Does read multi-session CDs >> Does read fixed-packet CD media using Method 2 >> Does not read CD bar code >> Does not read R-W subcode information >> Does read raw P-W subcode data from lead in >> Does return CD media catalog number >> Does return CD ISRC information >> Does support C2 error pointers >> Does not deliver composite A/V data >> >> Does play audio CDs >> Number of volume control levels: 256 >> Does support individual volume control setting for each channel >> Does support independent mute setting for each channel >> Does not support digital output on port 1 >> Does not support digital output on port 2 >> >> Loading mechanism type: tray >> Does support ejection of CD via START/STOP command >> Does not lock media on power up via prevent jumper >> Does allow media to be locked in the drive via PREVENT/ALLOW command >> Is not currently in a media-locked state >> Does not support changing side of disk >> Does not have load-empty-slot-in-changer feature >> Does not support Individual Disk Present feature >> >> Maximum read speed: 11080 kB/s (CD 62x, DVD 8x) >> Current read speed: 11080 kB/s (CD 62x, DVD 8x) >> Maximum write speed: 11080 kB/s (CD 62x, DVD 8x) >> Current write speed: 11080 kB/s (CD 62x, DVD 8x) >> Rotational control selected: CLV/PCAV >> Buffer size in KB: 2048 >> Copy management revision supported: 1 >> Number of supported write speeds: 2 >> Write speed # 0: 11080 kB/s CLV/PCAV (CD 62x, DVD 8x) >> Write speed # 1: 5540 kB/s CLV/PCAV (CD 31x, DVD 4x) >> >> Supported CD-RW media types according to MMC-4 feature 0x37: >> Does write multi speed CD-RW media >> Does write high speed CD-RW media >> Does write ultra high speed CD-RW media >> Does write ultra high speed+ CD-RW media >> >> NOW I will try to do a write to the DVD >> >> On Thursday 11 December 2008 15:23:12 Matt Graham wrote: >> > > From: jdawgaz@cox.net >> > > >> > >> installed ubuntu intrepid >> > >> then I was going to write some files to my CD-RW, and the device is >> > >> not >> > >> > found. >> > >> > >> it is installed as a scsi device, which might be the problem. >> > >> > This probably isn't the real problem. >> > >> > >> k3b says I can't use it to write, but read is ok >> > >> [ 4.750131] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T50L, SR04 >> > >> > DVD+-R*s are pretty standardized now, so this is probably OK. >> > >> > From: Lisa Kachold >> > >> > > Is your disk media already written or bad? When you slam in recordable >> > >> > media >> > >> > > k3b should automagically ask you what you would like to do? >> > >> > This depends on whether you've configured that to happen or not. Ubuntu >> > may do this by default, but I wouldn't do it like that. >> > >> > > Verify it via command line dvdrecord and cdrecord: >> > > http://ubuntuforums.org/archive/index.php/t-160777.html >> > > http://ubuntuforums.org/showthread.php?t=25212 >> > >> > Also, note that Debian-based distros don't use cdrecord. They use >> > wodim, >> > which Joerg is constantly complaining about, and saying that it's >> > horrible and has tons of bugs. So, make sure your cdrecord is SUID root >> > (still necessary since it locks pages into RAM AFAIK) and then do >> > >> > cdrecord -prcap dev=/dev/scd0 >> > >> > ...and reproduce the interesting-looking sections of its output for us. >> > You *may* want to go get the official cdrecord as well. >> >> --------------------------------------------------- >> PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us >> To subscribe, unsubscribe, or to change your mail settings: >> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss > > --------------------------------------------------- > PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us > To subscribe, unsubscribe, or to change your mail settings: > http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss > -- Sent from my mobile device A mouse trap, placed on top of your alarm clock, will prevent you from rolling over and going back to sleep after you hit the snooze button. Stephen --------------------------------------------------- PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us To subscribe, unsubscribe, or to change your mail settings: http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss