Alan Dayley wrote:
> Vaughn Treude wrote:
>> Craig,
>> Thanks for your reply.  Yes, it's old.  I was hoping (perhaps in vain) 
>> that I could solve this with some kind of mode switch. Or maybe this 
>> drive is on its way out. I'm always afraid that upgrading will break my 
>> other stuff.  :-)
>>
>>  From dmesg, I see these over and over again:
>> ATAPI device hdc:
>>    Error: Not ready -- (Sense key=0x02)
>>    (reserved error code) -- (asc=0x30, ascq=0x02)
>>    The failed "Read Subchannel" packet command was:
>>    "42 02 40 01 00 00 00 00 10 00 00 00 00 00 00 00 "
>> cdrom: This disc doesn't have any tracks I recognize!
>>
>> Same stuff in syslog.
>>
>> Puzzling, because this is an empty DVD, it's not SUPPOSED to have any 
>> tracks it recognizes!  :-)
> 
> I this case the first suspect is the burner and it's firmware, not the
> system software.  All recordable optical media is not equal.  Not all
> burners are equal either.
> 
> This part:
> 
>>    Error: Not ready -- (Sense key=0x02)
>>    (reserved error code) -- (asc=0x30, ascq=0x02)
> 
> is an error code in 3 bytes.  Taken together they mean:
> 2 / 30 / 02      CANNOT READ MEDIUM . INCOMPATIBLE FORMAT
> (as defined at http://www.isobuster.com/help.php?help=305  Not an
> official source but corroborates with others around.)
> 
> I think the drive cannot read the media you are giving it.  Does the
> drive still burn the other brand?  You could test that if you have the
> other brand blanks laying around.
> 
> Sometimes a burner firmware update can help, if you can find one.  Make
> sure you found the right firmware and updater, though.  It is usually
> easy to do such an update but there is a risk of "bricking" the burner.
> 
> Alan
> 

Yes.  It still burns the Memorex brand, I just tried it.  I thought at 
first the drive was ready to bite the dust, because I hadn't burned 
anything in a while.  But a firmware update sounds promising, I'll give 
it a try.  Thanks!

Vaughn

> 
> 
> ------------------------------------------------------------------------
> 
> ---------------------------------------------------
> PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
> To subscribe, unsubscribe, or to change your mail settings:
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss

---------------------------------------------------
PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
To subscribe, unsubscribe, or to change your mail settings:
http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss