Alan,
Thanks for the tips but those things I already thought of (except the
console setup, which I just tried and it has nothing about serial port
config, just a re-hash of the options available at install.) The
Network/Dialup page has settings for speed but nothing about low-level
serial port config. Maybe serial modem support is one of those features they
never thought anyone would actually use. I figured maybe the serial config
is burried somwehere in the rc.init sequence, but that is proving devilishly
difficult to nail down.
--
Phil Mattison
http://www.ohmikron.com/
Motors::Drivers::Controllers::Software

> I have not used IPCop with a serial modem so I am just guessing here.
>
> You are correct to aim at the protocol settings since that is what
> garbage data usually indicates.  Did you run the 'setup' command on the
> IPCop box console?  (ie on the monitor and keyboard connected to the
> computer running IPCop)  The settings for the serial port must be there
> somewhere.
>
> I'm asking your question in the #ipcop IRC channel.  You could drop in
> there too if you know IRC.  Connect to irc.freenode.net and join the
> #ipcop channel.
>
> OK.  In the administration GUI, click the Network-->Dialup menu item.
> On that screen there is a Connection tab with a drop-down selector for
> Interface.  Choose Serial in that box and you should get to the settings
> you need.  (This is according to help in the IRC channel)
>
> Alan


---------------------------------------------------
PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
To subscribe, unsubscribe, or to change  you mail settings:
http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss