der.hans wrote: >moin, moin, > >I'm having problems getting the land line working with a zap card. > > > >Sep 3 17:33:53 WARNING[1329]: Loading module chan_zap.so failed! > > If you did an update that updated the kernel then run genzaptelconf and rebuild_zaptel from root. The pseudo zap timer uses the usb interface, disabling USB can cause issues if you're using pseudo zap. It might be the dhcp server they bundle too (I don't use the DHCP server). I did have an issue once where I initially loaded asterisk@home without a zap card and then put one in, I didn't have time to figure it out, so I simply reloaded asterisk@home with the card installed and it worked fine. >Sep 3 17:33:57 WARNING[1348]: Unknown directive >'permit=192.168.1.0/255.255.255 >.0' at line 18 of manager_custom.conf >Sep 3 17:33:57 WARNING[1348]: ... >Soun >d may be choppy. >Sep 3 17:33:57 WARNING[1348]: Unknown directive 'parkingtime' at line 9 >of feat >ures.conf >Sep 3 17:33:57 NOTICE[1348]: Unable to load config mgcp.conf, MGCP >disabled >Sep 3 17:33:57 WARNING[1348]: Unable to open IAX timing interface: No >such devi >ce >Sep 3 17:33:57 NOTICE[1348]: Unable to load config skinny.conf, Skinny >disabled >Sep 3 17:33:57 WARNING[1348]: Unable to open '/dev/zap/channel': No such >device >Sep 3 17:33:57 ERROR[1348]: Unable to open channel 1: No such device >here = 0, tmp->channel = 1, channel = 1 >Sep 3 17:33:57 ERROR[1348]: Unable to register channel '1' >Sep 3 17:33:57 WARNING[1348]: chan_zap.so: load_module failed, returning >-1 >Sep 3 17:33:57 WARNING[1348]: Loading module chan_zap.so failed! > > > >Hmmm, looks like the permit line is supposed to be commented out. > >#permit=192.168.1.0/255.255.255.0 > >I deleted it and restarted asterisk. > >Don't know what what MGCP is. > > http://www.voip-info.org/tiki-index.php?page=MGCP >I haven't installed anything specific for IAX. That's the asterisk to >asterisk proto, right? > > It will do it automatically. >I think skinny is for some Cisco hardware devices I don't have. > > > I don't have cisco hardware either. Sounds more like the kernel modules aren't setup. Does the box have a sound card? Asterisk uses the sound card hardware for a bunch of things. >crw-r--r-- 1 asterisk asterisk 196, 254 Sep 2 00:44 /dev/zap/channel > >Just because there's a /dev/ doesn't mean the physical device is setup, >though. > > True, but if it's not there you can be sure it isn't setup. >[root@asterisk1 root]# cat /proc/interrupts > CPU0 > 0: 1401443 XT-PIC timer > 1: 4 XT-PIC keyboard > 2: 0 XT-PIC cascade > 8: 1 XT-PIC rtc > 10: 8408 XT-PIC eth0 > 11: 0 XT-PIC libata > 12: 33 XT-PIC PS/2 Mouse > 14: 44358 XT-PIC ide0 > 15: 60 XT-PIC ide1 >NMI: 0 >ERR: 0 > >The zap card was on interrupt 10, but when I restarted asterisk ( >including via reboot and hard boot ) it didn't come back up. > > > Hmm.. What is on irq11 - libata? Having eth0 and the zap card on the same interrupt will give you all sorts of trouble with audio quality. Go into the bios and force some thing to share an irq or disable thing you don't care about Heres from a box I'm building: [root@asterisk1 root]# cat /proc/interrupts 0: 53503481 XT-PIC timer 1: 467 XT-PIC keyboard 2: 0 XT-PIC cascade * 3: 534466857 XT-PIC wcfxo* 4: 5 XT-PIC serial 5: 0 XT-PIC usb-ohci 8: 1 XT-PIC rtc 9: 0 XT-PIC ehci-hcd 10: 0 XT-PIC usb-ohci 11: 525097 XT-PIC usb-ohci, eth0 12: 860 XT-PIC PS/2 Mouse 14: 937421 XT-PIC ide0 15: 0 XT-PIC ide1 NMI: 0 >I also tried an upgrade via yum. > >ciao, > >der.hans > > I think at this point you should start over. This thing has about the same learning curve as Linux does, but like Linux persistence pays off :) I started over about 6 times before I got the first one right after that it was much easier. Here are some sites that will eat up more time than you have (grin): http://www.voip-info.org http://voxilla.com http://sourceforge.net/forum/?group_id=123387 http://sourceforge.net/forum/?group_id=121515 It definately looks like the zap module isn't getting loaded start with genzaptelconf and rebuild_zaptel . JD --------------------------------------------------- PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us To subscribe, unsubscribe, or to change you mail settings: http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss