On Jan 31, 2005, at 9:32 PM, FoulDragon@aol.com wrote: > Well, I've been happy with my Samsung ML-1210, bought probably 2.5 > years ago at Fry's (at the time it was 150 USD - 50 rebate = 100). >   > I haven't finished my way through the starter cartridge packed in > (rated 1000 pages) but note that online dealers have replacements > (rated 2500) for 40 to 60 USD depending on if remanufactured or new. >   > However, the model's long gone.  I saw one at the Goodwill recently, > almost got it for a spare cartridge, but the cart was gone.  I think > Samsung now offers better models (15 or more ppm versus 12, and the > design's more enclosed-- on the 1210, the paper sits out, and the > output tray's vertical so it collects dirt which can't get replaced) >   > HP also makes (made?) a low-end laser, at the time it was a $200 > competitor with the $175 ML-1210; it was a Winprinter. >   > I know Brother makes an inexpensive laser, but Brother lasers often > have a seperate drum and toner cartridge.  The toner's cheap but after > like 20000 pages the drum goes and it's a "cheaper to throw the > printer away" replacement. You are right about the dual nature of Brother laser printers... but it's so worth it! I've mucked around with a few laser printers in my day, and can say definitively that Brother printers kick serious ass. Plus, 20,000 pages is a *lot* of pages. You can print 10 pages a day for FIVE years with the same drum. And the toner lasts for upwards of 6,000 pages (10 pages a day for two years). AND, if that's not enough, they aren't that expensive to replace. I just bought a replacement drum for my HL1270N (see other post for full gory story) for only $50. And that'll last for another 20,000 odd pages. Beat that, any ink jet! :-) I strongly recommend any Brother laser printer to anybody. --------------------------------------------------- PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us To subscribe, unsubscribe, or to change you mail settings: http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss