On Thursday 31 July 2003 10:45 am, elemint@cox.net wrote:
> Below is the output from cat /proc/scsi/scsi
>
> cat /proc/scsi/scsi
> Attached devices:
> Host: scsi0 Channel: 00 Id: 00 Lun: 00
>   Vendor: DELL     Model: PERCRAID RAID5   Rev: V1.0
>   Type:   Direct-Access                    ANSI SCSI revision: 02
> Host: scsi2 Channel: 00 Id: 03 Lun: 00
>   Vendor: HP       Model: C1118M           Rev: 5.14
>   Type:   Medium Changer                   ANSI SCSI revision: 02
> Host: scsi2 Channel: 00 Id: 04 Lun: 00
>   Vendor: HP       Model: C1113M           Rev: 1.14
>   Type:   Optical Device                   ANSI SCSI revision: 02
> Host: scsi2 Channel: 00 Id: 05 Lun: 00
>   Vendor: HP       Model: C1113M           Rev: 1.14
>   Type:   Optical Device                   ANSI SCSI revision: 02
> Host: scsi3 Channel: 00 Id: 05 Lun: 00
>   Vendor: NEC      Model: CD-ROM DRIVE:466 Rev: 1.06
>   Type:   CD-ROM                           ANSI SCSI revision: 02
>
> how can I confirm which device my DLT tape drive is?

Huh? There's no DLT tape drive in the above list, just two MO drives and a MO 
changer. In addition, it looks as if you have two of the drives at the same 
SCSI ID (SCSI ID 5). My suspicion is that you have your DLT tape drive at the 
same SCSI ID as some other device,  and thus it's not being noticed. 

-- 
Eric Lee Green  mailto:eric@badtux.org
Unix/Linux/Storage Software Engineer needs job -- 
see http://badtux.org for resume