Am 31. Jul, 2003 schw=E4tzte elemint@cox.net so:

> Below is the output from cat /proc/scsi/scsi
>
> cat /proc/scsi/scsi
> Attached devices:
> Host: scsi0 Channel: 00 Id: 00 Lun: 00
>   Vendor: DELL     Model: PERCRAID RAID5   Rev: V1.0
>   Type:   Direct-Access                    ANSI SCSI revision: 02

This should be a hard drive ( or drives since it appears to be RAID ).

> Host: scsi2 Channel: 00 Id: 03 Lun: 00
>   Vendor: HP       Model: C1118M           Rev: 5.14
>   Type:   Medium Changer                   ANSI SCSI revision: 02

This is a robot.

> Host: scsi2 Channel: 00 Id: 04 Lun: 00
>   Vendor: HP       Model: C1113M           Rev: 1.14
>   Type:   Optical Device                   ANSI SCSI revision: 02
> Host: scsi2 Channel: 00 Id: 05 Lun: 00
>   Vendor: HP       Model: C1113M           Rev: 1.14
>   Type:   Optical Device                   ANSI SCSI revision: 02

These should be mag-op drives, I think.

> Host: scsi3 Channel: 00 Id: 05 Lun: 00
>   Vendor: NEC      Model: CD-ROM DRIVE:466 Rev: 1.06
>   Type:   CD-ROM                           ANSI SCSI revision: 02

And this one just might be a CD-ROM :).

> how can I confirm which device my DLT tape drive is?

What physical devices do you have hooked up to the box?

Is the medium changer a robot for the DLT? Do you have two DLT tape drives?

/dev/nst0 is the first tape drive, /dev/nst1 is the second tape drive.

mt -f /dev/nst0 status

ciao,

der.hans
--=20
#  https://www.LuftHans.com/    http://www.AZOTO.org/
#  C'est la Net - der.hans