Craig White wrote:

>On Mon, 2003-07-07 at 09:39, FrankMandato wrote:
>
>>   When I use dhcp and activate eth0 I get a "Determining IP iformation 
>>for eth0... failed" errormessage. I ahve disabled my firewall as well as 
>>iptables and still can't get out.
>>
>>  Thanks
>>
>>  FrankM
>>
>>Jeffrey Pyne wrote:
>>
>>>Are you assigning a static IP address to eth0?  If so, that might be your
>>>problem.  Cox wants you to use DHCP.  Change the configuration of eth0 so
>>>that it grabs its IP address, default gateway, netmask, etc. from Cox's
>>>servers and try again.  You may have to power off your cable modem for a
>>>minute or two to clear its cache in order for your RH box to obtain an IP
>>>address from DHCP.
>>>
>>>Also, if your firewall rules are blocking ICMP, that might be why you can't
>>>ping anything.  Try stopping your firewall and see if you can ping your
>>>default gateway, nameservers, www.google.com, etc.
>>>
>>>HTH,
>>>
>>>Jeff
>>>
>>>On Monday, July 07, 2003 9:10 AM, FrankMandato wrote:
>>>
>>>
>>>>  I also changed my IP address to 68.98.10.73, but the
>>>>routing table never changes, I tried adding that address
>>>>manually, but I get an error message that the netmask
>>>>does not match the IP address, the netmask I use is
>>>>255.255.255.240 for the new address.
>>>>
>---------
>One little but very important detail for Cox & cable modems - they hold
>out for a single MAC address, I presume as a security caution to keep
>them from being hijacked.
>
>If you pull the power plug on the cable modem for 5 minutes and then
>plug it back in, it will reset the modem, reload its configuration from
>Cox's TFTP server and allow you to switch MAC addresses
>(computers/network cards)
>
>Try it
>
>Craig
>
>---------------------------------------------------
>PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
>To subscribe, unsubscribe, or to change  you mail settings:
>http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>
   That did the trick, I never even thought about resetting the cable
modem  ---duh.

  Thanks for all the help.

  FrankM