The cdrom only has the option for 1,2, and 4. Thomas Cameron wrote: > Ouch - set them to 0, 1 and 5 and you will be in better shape. That unit > takes 80-pin drives, so you shouldn't need to mess with termination. > -- > Thomas Cameron, RHCE, CNE, MCSE, MCT > Cameron Technical Services, Inc. > http://www.camerontech.com/ > (512) 454-3200 > ----- Original Message ----- > From: "Robert Wultsch" > To: > Sent: Sunday, June 29, 2003 1:57 AM > Subject: Re: SCSI issue > > > >>Thanks. >>Cdrom is set to id4,hd are 1 and 3. >> >>A picture of my ghetto sled (I did not have a real sled and did not feel >>like paying for one) is at >>http://www.public.asu.edu/~rwultsch/media/dsc_004.jpg . >> >>Thomas Cameron wrote: >> >>>Look up the installed drives on the vendor's (i.e. Seagate or WD or >>>whatever) web site. Jumper the first drive to be SCSI ID 0, the second >>>drive to be ID1 and the CD to be SCSI ID 5. Sparcs don't play nice with > > a > >>>CD which is not SCSI ID 5. >>>-- >>>Thomas Cameron, RHCE, CNE, MCSE, MCT >>>Cameron Technical Services, Inc. >>>http://www.camerontech.com/ >>>(512) 454-3200 >>>----- Original Message ----- >>>From: "Robert Wultsch" >>>To: >>>Sent: Sunday, June 29, 2003 1:28 AM >>>Subject: SCSI issue >>> >>> >>> >>> >>>>I have a sparc station 20 that I recently bough a cdrom for so that I >>>>could install debian linux. At this point there is not a functioning os >>>>on the computer. >>>> >>>>At the OK prompt when I type "probe scsi" I am told that only the cdrom >>>>is detected and then it hangs. On the two hard drives previously >>>>installed there is a total of one jumper in place. On the cdrom no >>>>jumper are in place. >>>> >>>>I am sure this is a simple matter of the scsi variant of master/slave or >>>>something like that, but I would rather not experiment with jumpers. >>>> >>>>--------------------------------------------------- >>>>PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us >>>>To subscribe, unsubscribe, or to change you mail settings: >>>>http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss >>>> >>> >>> >>>--------------------------------------------------- >>>PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us >>>To subscribe, unsubscribe, or to change you mail settings: >>>http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss >> >> >>--------------------------------------------------- >>PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us >>To subscribe, unsubscribe, or to change you mail settings: >>http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss >> > > > --------------------------------------------------- > PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us > To subscribe, unsubscribe, or to change you mail settings: > http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss