Ouch - set them to 0, 1 and 5 and you will be in better shape. That unit takes 80-pin drives, so you shouldn't need to mess with termination. -- Thomas Cameron, RHCE, CNE, MCSE, MCT Cameron Technical Services, Inc. http://www.camerontech.com/ (512) 454-3200 ----- Original Message ----- From: "Robert Wultsch" To: Sent: Sunday, June 29, 2003 1:57 AM Subject: Re: SCSI issue > Thanks. > Cdrom is set to id4,hd are 1 and 3. > > A picture of my ghetto sled (I did not have a real sled and did not feel > like paying for one) is at > http://www.public.asu.edu/~rwultsch/media/dsc_004.jpg . > > Thomas Cameron wrote: > > Look up the installed drives on the vendor's (i.e. Seagate or WD or > > whatever) web site. Jumper the first drive to be SCSI ID 0, the second > > drive to be ID1 and the CD to be SCSI ID 5. Sparcs don't play nice with a > > CD which is not SCSI ID 5. > > -- > > Thomas Cameron, RHCE, CNE, MCSE, MCT > > Cameron Technical Services, Inc. > > http://www.camerontech.com/ > > (512) 454-3200 > > ----- Original Message ----- > > From: "Robert Wultsch" > > To: > > Sent: Sunday, June 29, 2003 1:28 AM > > Subject: SCSI issue > > > > > > > >>I have a sparc station 20 that I recently bough a cdrom for so that I > >>could install debian linux. At this point there is not a functioning os > >>on the computer. > >> > >>At the OK prompt when I type "probe scsi" I am told that only the cdrom > >>is detected and then it hangs. On the two hard drives previously > >>installed there is a total of one jumper in place. On the cdrom no > >>jumper are in place. > >> > >>I am sure this is a simple matter of the scsi variant of master/slave or > >>something like that, but I would rather not experiment with jumpers. > >> > >>--------------------------------------------------- > >>PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us > >>To subscribe, unsubscribe, or to change you mail settings: > >>http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss > >> > > > > > > --------------------------------------------------- > > PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us > > To subscribe, unsubscribe, or to change you mail settings: > > http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss > > > --------------------------------------------------- > PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us > To subscribe, unsubscribe, or to change you mail settings: > http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss >