This is a multi-part message in MIME format. --------------030801080600090600080802 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Thanks, Bryce- lspci and dmesg output are attached. Bryce C wrote: >On the modem issue, it's most likely a winmodem. Please send the >`lspci` output (might be seperate package) and the `dmesg`. > >On Sun, 2003-05-11 at 09:03, Lee Einer wrote: > >>Hi, all- >> >>I just purchased a Hewlett Packard Pavillion ZE4325US laptop. I have >>loaded Mandrake 8.2, and will be upgrading to 9.1 as soon as my boxed >>set arrives in the mail. The install went well, but I am encountering a >>few minor configuration issues- >> >>First, this laptop keyboard has five cutesy, illuminated programmable >>keys at the top, which are supposed to be shortcuts to internet access, >>e-mail, etc. Is there any way to get them recognized and programmed >>under Linux? >> >>Second, the laptop has a built-in modem which is not detected by >>HardDrak. There is no /dev/modem file. Specs provided with this laptop >>are pathetic, and don't tell me what kind of modem I have, but I am >>thinking at this point it is a winmodem. Assuming it is a winmodem, what >>is involved in getting it configured? >> >>Third is the DVD-ROM drive. It works, now that I have created a symlink >>from /dev/dvd to the appropriate block device, and identified and loaded >>the appropriate Xine audio driver, but I use the term "works" loosely, >>as it won't play encrypted DVDs. What software do you all recommend for >>playing DVDs on laptops? >> >>Last issue- the system hangs for awhile on boot. I think it is waiting >>for an internet or LAN connection through the built-in NIC. I may want >>to share an internet connection by installing a second NIC in my desktop >>and enabling internet sharing. I would like the laptop to not take >>forever to boot, but would like to set it up so I can jack into my >>desktop and browse the internet, etc. How can I set this up so that the >>laptop does not look for an internet or LAN connection on start-up, but >>does look for a connection when I want it to? >> >>Lee Einer >> >>--------------------------------------------------- >>PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us >>To subscribe, unsubscribe, or to change you mail settings: >>http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss >> --------------030801080600090600080802 Content-Type: text/plain; name="output" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="output" Linux version 2.4.18-6mdk (quintela@bi.mandrakesoft.com) (gcc version 2.96 20000731 (Mandrake Linux 8.2 2.96-0.76mdk)) #1 Fri Mar 15 02:59:08 CET 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000bef0000 (usable) BIOS-e820: 000000000bef0000 - 000000000beff000 (ACPI data) BIOS-e820: 000000000beff000 - 000000000bf00000 (ACPI NVS) BIOS-e820: 000000000bf00000 - 000000000c000000 (reserved) BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) hm, page 0bef0000 reserved twice. On node 0 totalpages: 48880 zone(0): 4096 pages. zone(1): 44784 pages. zone(2): 0 pages. Kernel command line: auto BOOT_IMAGE=linux ro root=301 devfs=mount hdc=ide-scsi quiet ide_setup: hdc=ide-scsi Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Initializing CPU#0 Detected 1656.371 MHz processor. Console: colour dummy device 80x25 Calibrating delay loop... 3303.01 BogoMIPS Memory: 189864k/195520k available (1170k kernel code, 5268k reserved, 332k data, 260k init, 0k highmem) Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: Before vendor init, caps: 0383fbff c1cbfbff 00000000, vendor = 2 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After vendor init, caps: 0383fbff c1cbfbff 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000 CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000 CPU: AMD mobile AMD Athlon(tm) XP 2000+ stepping 01 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfd87b, last bus=2 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router ALI [10b9/1533] at 00:07.0 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS not found. Starting kswapd VFS: Diskquotas version dquot_6.5.0 initialized devfs: v1.10 (20020120) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 vesafb: framebuffer at 0xe0000000, mapped to 0xcc800000, size 65472k vesafb: mode is 1024x768x16, linelength=2048, pages=41 vesafb: protected mode interface info at c000:5199 vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 Looking for splash picture.... no good signature found. Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A PCI: Found IRQ 3 for device 00:08.0 Redundant entry in serial pci_table. Please send the output of lspci -vv, this message (10b9,5457,103c,0024) and the manufacturer and name of serial board or modem board to serial-pci-info@lists.sourceforge.net. register_serial(): autoconfig failed block: 128 slots per queue, batch=32 RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ALI15X3: IDE controller on PCI bus 00 dev 80 PCI: No IRQ known for interrupt pin A of device 00:10.0. Please try using pci=biosirq. ALI15X3: chipset revision 196 ALI15X3: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x8080-0x8087, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x8088-0x808f, BIOS settings: hdc:DMA, hdd:pio hda: IC25N040ATCS04-0, ATA DISK drive hdc: QSI CD-RW/DVD-ROM SBW-241, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 78140160 sectors (40008 MB) w/1768KiB Cache, CHS=4864/255/63, UDMA(33) Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 > FDC 0 is a post-1991 82077 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 1024 buckets, 8Kbytes TCP: Hash tables configured (established 16384 bind 16384) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Uncompressing......done. Freeing initrd memory: 133k freed VFS: Mounted root (ext2 filesystem). Mounted devfs on /dev Journalled Block Device driver loaded kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Freeing unused kernel memory: 260k freed Real Time Clock Driver v1.10e EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,1), internal journal Adding Swap: 248968k swap-space (priority -1) SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: QSI Model: CDRW/DVD SBW-241 Rev: VX08 Type: CD-ROM ANSI SCSI revision: 02 kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,6), internal journal EXT3-fs: mounted filesystem with ordered data mode. natsemi.c:v1.07 1/9/2001 Written by Donald Becker http://www.scyld.com/network/natsemi.html (unofficial 2.4.x kernel port, version 1.07+LK1.0.14, Nov 27, 2001 Jeff Garzik, Tjeerd Mulder) PCI: Found IRQ 11 for device 00:12.0 eth0: NatSemi DP8381[56] at 0xd0863000, 00:0b:cd:53:90:22, IRQ 11. usb.c: registered new driver usbdevfs usb.c: registered new driver hub PCI: Assigned IRQ 9 for device 00:02.0 usb-ohci.c: USB OHCI at membase 0xd087b000, IRQ 9 usb-ohci.c: usb-00:02.0, Acer Laboratories Inc. [ALi] M5237 USB usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 4 ports detected parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: irq 7 detected eth0: autonegotiation did not complete in 4000 usec. eth0: remaining active for wake-on-lan Linux Kernel Card Services Kernel Version options: [pci] [cardbus] [pm] PCI: Found IRQ 11 for device 00:0a.0 IRQ routing conflict for 00:0a.0, have irq 5, want irq 11 Yenta IRQ list 0c98, PCI irq5 Socket status: 30000007 cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x408-0x40f 0x480-0x48f 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Trident 4DWave/SiS 7018/ALi 5451,Tvia CyberPro 5050 PCI Audio, version 0.14.9d, 03:23:13 Mar 15 2002 PCI: Found IRQ 5 for device 00:06.0 trident: ALi Audio Accelerator found at IO 0x8400, IRQ 5 ac97_codec: AC97 Audio codec, id: 0x4358:0x5429 (Unknown) Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 00:00.0 Host bridge: ATI Technologies Inc: Unknown device cab0 (rev 13) 00:01.0 PCI bridge: ATI Technologies Inc: Unknown device 700f (rev 01) 00:02.0 USB Controller: Acer Laboratories Inc. [ALi] M5237 USB (rev 03) 00:06.0 Multimedia audio controller: Acer Laboratories Inc. [ALi] M5451 PCI South Bridge Audio (rev 02) 00:07.0 ISA bridge: Acer Laboratories Inc. [ALi] M1533 PCI to ISA Bridge [Aladdin IV] 00:08.0 Modem: Acer Laboratories Inc. [ALi]: Unknown device 5457 00:0a.0 CardBus bridge: O2 Micro, Inc.: Unknown device 6972 00:10.0 IDE interface: Acer Laboratories Inc. [ALi] M5229 IDE (rev c4) 00:11.0 Bridge: Acer Laboratories Inc. [ALi] M7101 PMU 00:12.0 Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller 01:05.0 VGA compatible controller: ATI Technologies Inc: Unknown device 4336 --------------030801080600090600080802--