I once had overly complex routing tables set up which caused me great pain and confusing problems such as you are describing. What are your routing tables? eg route -n from all 3 machines. > George Gambill wrote: > > > > Trying to set up a router (RH8) between a 192.168.100.0/255.255.255.0 subnet > > and a 10.1.0.0/255.255.0.0 subnet. > > > > Hosts involved are > > > > winslow 192.168.100,253 > > > > gwg 192.168.100.252 (eth0) > > gwg 10.1.1.68 (eth1) > > > > nowhere 10.1.1.66 > > > > >From winslow (aka 192.168.100.253) I can ping: > > gwg (aka itself) > > 192.168.100.252 (aka GWG eth0) > > 10.1.1.68 (aka GWG eth1) > > > > but not: > > nowhere (aka 10.1.1.66) > > 10.1.1.66 (aka nowhere) > > > > >From GWG (the router) I can ping: > > winslow (aka 192.168.100.253) > > 192.168.100.253 (aka winslow eth0) > > > > gwg (aka itself) > > 192.168.100.252 (aka itself eth0) > > 10.1.1.68 (aka itself eth1) > > > > nowhere (aka 10.1.1.66) > > 10.1.1.66 (aka nowhere) > > > > from nowhere (aka 10.1.1.66) I can ping: > > > > gwg > > 10.1.1.68 > > 192.168.100.252 > > > > but not: > > winslow > > 192.168.100.253 > > > > Using Webmin on the router (gwg) and looking at the firewall, it shows under > > "packet filtering": > > "FORWARD" default "Accept" with no other rules > > "INPUT" default "Accept" with no other rules > > "OUTPUT" default "Accept" with no other rules > > > > Any ideas why I can't ping nowhere (10.1.1.66) from winslow > > (192.168.100.253)? > > > > George > > --------------------------------------------------- > > PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us > > To subscribe, unsubscribe, or to change you mail settings: > > http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss > > > Hi George, > > What is the status of IP Forwarding on the router (gwg)? cat > /proc/sys/net/ipv4/ip_forward > > George > -- Patrick Fleming, EA Licensed to represent taxpayers before Exam, Appeals, and Conference divisions of the IRS