actually,
if you do it right, you don't need to assign a gateway for eth1. just use an 
ech statement that allows ipv4_forwarding on.

thats what I use without truble at all and saves on the gatway line entries

Technomage

On Monday 11 November 2002 04:38 am, you wrote:
>    What distro are you running?
>
>    I have cox dhcp and have ipmasq running off a firewall that gives the
> boxes behind the firewall internet access. I am running RH 7.3
>
>    eth0 is set for cox dhcp, eth1 is set for 192.168.0.1, the boxes
> behind this are set to 192.168.0.x and 192.168.0.x where x is anything
> from 192.168.0.2 to 192.168.0.254.
>
>    The gateway for all machines behind the firewall is 192.168.0.1
>
>    The gateway for eth1 is cox dhcp ipaddress, everytime cox changes
> your ip address, you have to change the gateway for eth1 to the new
> value.
>
>   I have to say that it took me a little time to get this set up running
> correctly, now that it is, all I have to do to add another pc is
> configure the new machine and that's it.
>
>   Hope this helps --- I'll dig around and look where I got the firewall
> scripts from, they work just great, and let you know.
>
>   FrankM
>
> On Sat, 2002-11-09 at 17:28, Unixprgrmr@aol.com wrote:
> > How do I go from cox dhcp to ip masquerade for fixed ips?
> >
> > I already have a system w/2 nic cards....
> >
> > Thanks!
> > Lynn
>
> -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
> PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
> To subscribe, unsubscribe, or to change  you mail settings:
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss

-- 
I will not be pushed, filed, stamped, indexed, briefed, debriefed, or 
numbered!
My life is my own - No. 6