which distro of linux are u using i seen alot of this with RH and SuSE .. RH used to screw up alot on the floppy drive with this error basically i found that it did'nt like the floppy options either as a module or built into the kernel. I did'nt investigate too deeply cuz well i did'nt get these moans from Slackware. Nige ----- Original Message ----- From: "Tom Achtenberg" To: Sent: Wednesday, November 07, 2001 10:37 PM Subject: RE: Mounting CDROM > I issued the ln command below and the mount command. Still could not mount > the CD. I rebooted and do not get the fstab fail I was getting earlier. > When I try to mount the CD I get he following error: "Wrong FS type, Bad > Option, Bad Superblock on /dev/cdrom or too many mounted file systems." The > cdrom line in /etc/fstab is: "/dev/cdrom mnt/cdrom iso9660 > noauto,owner,ro 0 0" > > Would it be better if I made the CD a slave on the secondary? Should I move > my second hard drive to the secondary and put the CD on the primary? > > -----Original Message----- > From: plug-discuss-admin@lists.PLUG.phoenix.az.us > [mailto:plug-discuss-admin@lists.PLUG.phoenix.az.us]On Behalf Of Thomas > Mondoshawan Tate > Sent: Wednesday, November 07, 2001 8:54 PM > To: plug-discuss@lists.PLUG.phoenix.az.us > Subject: Re: Mounting CDROM > > > On Wed, Nov 07, 2001 at 08:01:13PM -0800, Matt Alexander wrote: > > "hdc" means that you've got an IDE device (your cdrom) plugged into the > > secondary IDE controller and set as the Master. /dev/cdrom is just a > > symlink to /dev/hdc (in your case). So check that /dev/cdrom exists, and > > if it doesn't, create it like this: > > > > ln -s /dev/hdc /dev/cdrom > > > > Then mount it like this: > > > > mount /dev/cdrom /mnt/cdrom > > > > If that works, then you can add this to your /etc/fstab to be able to > > mount your cdrom like this in the future: > > > > mount /mnt/cdrom > > Additionally, your "Unknown filesystem" errors could be due to a missing > default filesystem option in the fstab. Check to make sure that the third > field for your cdrom entry reads as "iso9660" -- otherwise you will have to > specify the filesystem type every time you try to mount. (mount /mnt/cdrom > -t iso9660). > > -- > Thomas "Mondoshawan" Tate > phoenix@psy.ed.asu.edu > http://tank.dyndns.org > > ________________________________________________ > See http://PLUG.phoenix.az.us/navigator-mail.shtml if your mail doesn't post to the list quickly and you use Netscape to write mail. > > PLUG-discuss mailing list - PLUG-discuss@lists.PLUG.phoenix.az.us > http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss >