Well I did some more exploring and digging! Did get the print server up
on W2K and Linux! Now that that works I discovered I needed a 170X print
server to get the scanning functions from the W2K box! Aaarrrgg!
Somedays!

So once I get ahold of one of those, does anyone know what may be
required to get that scanning stuff to work from Linux?

Joe Stringer wrote:
> 
> >15. print server setup (mazdaracer)
> 
> >I just picked up a JetDirect EX Plus3 (used) and an HP G55 3-in-1
> printer/scanner/fax.
> >I only have the CD for the print server. I also have a router I
> >configured as my DHCP server, altho I have static addresses on my Linux
> >box and my W2K box for my wife.
> >I unplugged the server and plugged it back in while holding the 'test'
> >button as I think it should reset the box and give it a number from the
> >DHCP pool. Except I don't know what that may be.
> 
> Option 1
> Install the CD that came with the print server on your wife's machine.
> It will detect the print server and allow you to set a static IP.
> 
> Option 2
> You should be able to get into the router, either by browser or telnet and
> view
> a table of current DHCP leases.
> 
> Option 3
> Set one of your machines to pick up a DHCP address.  View what it is, then
> ping
> a couple of addresses before and after it until you get a reply.  This is
> most
> likely the print server.
> 
> I beleive this is what you were asking!?
> 
> Joe Stringer
> joe@stringshome.com
> 
> ________________________________________________
> See http://PLUG.phoenix.az.us/navigator-mail.shtml if your mail doesn't post to the list quickly and you use Netscape to write mail.
> 
> PLUG-discuss mailing list  -  PLUG-discuss@lists.PLUG.phoenix.az.us
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss