I have found a temp fix which works until you can upgrade:
firstly, disable the http service
then move th port elsewhere.

write this and reboot.

it should "cure" the problem for a while (I had to do this here).

Technomage Hawke

Kevin Brown wrote:
> 
> OK, well the latest round of Red Code is now giving me more headaches at home
> than I care to deal with.  My poor DSL router (Cisco 675 External DSL router) is
> going down every few hours and requires a power cycling to bring it back up.  It
> is currently running CBOS 2.0.1 and I want to upgrade it to 2.4.1 (or 2.4.2),
> but since my experience with the duplicate of the modem (which I upgraded from
> NSOS 1.4 to CBOS 2.4.2) was, shall we say, less than successful (I can't get the
> config right to actually use it), I was wondering if anyone knew of what the
> exact configuration of the modem should be to get it to work.
> 
> I saw this site http://www.users.uswest.net/~rlutton/ADSL/indexJS.html and used
> the config he shows on the site, but the modem that I upgraded, while being able
> to connect to Qwest, is not working as an actual router.  The wan light
> finalizes solid green and the ethernet shows green with a blinking amber
> activity light (as stuff happens on the net), but nothing actually can get out
> on the net through it.  I've had experience with Qwest's so called tech-support
> and would rather see if someone else here had already gone through this
> themselves.
> 
> The DSL router is set up in PPP mode using DHCP and NAT for the machines in my
> house (10.0.0.x addresses inside).
> 
> Any help/suggestions appreciated.
> ________________________________________________
> See http://PLUG.phoenix.az.us/navigator-mail.shtml if your mail doesn't post to the list quickly and you use Netscape to write mail.
> 
> PLUG-discuss mailing list  -  PLUG-discuss@lists.PLUG.phoenix.az.us
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss

-- 
I will not be pushed, filed, stamped, indexed, briefed, debriefed, or
numbered!
My life is my own - No. 6