There is no error message there.  Sniffit simply doesn't have a make
install target.

On Sun, Jul 01, 2001 at 09:29:08AM -0800, Eric Van Buskirk wrote:
> Hi ALL
> 
> For epistemic reasons only, I am trying to install sniffit on my RH 7.1.
> It's not going to well, as you can see from the error log below.  I
> downloaded the file from
> <http://reptile.rug.ac.be/~coder/sniffit/sniffit.html>.  I also added the
> associated patch.  I then did "./configure"; then "make".  Upon "make", I
> received error messages.  If anyone could offer some suggestions, I would
> appreciate it.  (PS--My network is a *home* network, so any packets I read
> will be my own.  :-)).
> 
> I tried to continue after the errors with "make install-sh" and "./make
> install-sh" but the former returns a message "nothing to be done for
> install-sh".  Has anyone ever worked with this program?
> 
> By the way, what is the best way to send error messages to a log file when
> using make?  Thanks a lot!
> 
> 
> [root@Shitty sniffit.0.3.5]# make
> 
> gcc -w -O2 -c
> 
> sn_generation.c -I./libpcap-0.3 -L./libpcap-0.3 -DHAVE_LIBNCURSES=1 -DHAVE_N
> CURSES_H=1 -DHAVE_SHMGET=1 -DHAVE_ATEXIT=1 -DSIZEOF_UNSIGNED_SHORT_INT=2 -DS
> IZEOF_UNSIGNED_LONG_INT=4 -DLINUX=1
> gcc -w -O2 -c
> 
> sn_interface.c -I./libpcap-0.3 -L./libpcap-0.3 -DHAVE_LIBNCURSES=1 -DHAVE_NC
> URSES_H=1 -DHAVE_SHMGET=1 -DHAVE_ATEXIT=1 -DSIZEOF_UNSIGNED_SHORT_INT=2 -DSI
> ZEOF_UNSIGNED_LONG_INT=4 -DLINUX=1
> gcc -w -O2 -c
> sn_cfgfile.c -I./libpcap-0.3 -L./libpcap-0.3 -DHAVE_LIBNCURSES=1 -DHAVE_NCUR
> SES_H=1 -DHAVE_SHMGET=1 -DHAVE_ATEXIT=1 -DSIZEOF_UNSIGNED_SHORT_INT=2 -DSIZE
> OF_UNSIGNED_LONG_INT=4 -DLINUX=1
> gcc -w -O2 -c
> 
> sn_logfile.c -I./libpcap-0.3 -L./libpcap-0.3 -DHAVE_LIBNCURSES=1 -DHAVE_NCUR
> SES_H=1 -DHAVE_SHMGET=1 -DHAVE_ATEXIT=1 -DSIZEOF_UNSIGNED_SHORT_INT=2 -DSIZE
> OF_UNSIGNED_LONG_INT=4 -DLINUX=1
> cd libpcap-0.3; make; cd ..
> make[1]: Entering directory `/root/sniffit.0.3.5/libpcap-0.3'
> gcc -O2 -I.  -Ilinux-include -DHAVE_MALLOC_H=1 -DHAVE_ETHER_HOSTTON=1 -DHAVE
> _STR ERROR=1  -c ./pcap-linux.c
> gcc -O2 -I.  -Ilinux-include -DHAVE_MALLOC_H=1 -DHAVE_ETHER_HOSTTON=1 -DHAVE
> _STR ERROR=1  -c ./pcap.c
> gcc -O2 -I.  -Ilinux-include -DHAVE_MALLOC_H=1 -DHAVE_ETHER_HOSTTON=1 -DHAVE
> _STR ERROR=1  -c ./inet.c
> gcc -O2 -I.  -Ilinux-include -DHAVE_MALLOC_H=1 -DHAVE_ETHER_HOSTTON=1 -DHAVE
> _STR ERROR=1  -c ./gencode.c
> gcc -O2 -I.  -Ilinux-include -DHAVE_MALLOC_H=1 -DHAVE_ETHER_HOSTTON=1 -DHAVE
> _STR ERROR=1  -c ./optimize.c
> gcc -O2 -I.  -Ilinux-include -DHAVE_MALLOC_H=1 -DHAVE_ETHER_HOSTTON=1 -DHAVE
> _STR ERROR=1  -c ./nametoaddr.c
> gcc -O2 -I.  -Ilinux-include -DHAVE_MALLOC_H=1 -DHAVE_ETHER_HOSTTON=1 -DHAVE
> _STR ERROR=1  -c ./etherent.c
> gcc -O2 -I.  -Ilinux-include -DHAVE_MALLOC_H=1 -DHAVE_ETHER_HOSTTON=1 -DHAVE
> _STR ERROR=1  -c ./savefile.c
> gcc -O2 -I.  -Ilinux-include -DHAVE_MALLOC_H=1 -DHAVE_ETHER_HOSTTON=1 -DHAVE
> _STR ERROR=1  -c ./bpf_filter.c
> gcc -O2 -I.  -Ilinux-include -DHAVE_MALLOC_H=1 -DHAVE_ETHER_HOSTTON=1 -DHAVE
> _STR ERROR=1  -c ./bpf_image.c
> flex -Ppcap_ -t scanner.l > $$.scanner.c; mv $$.scanner.c scanner.c
> bison -y -p pcap_ -d grammar.y
> mv y.tab.c grammar.c
> mv y.tab.h tokdefs.h
> gcc -O2 -I.  -Ilinux-include -DHAVE_MALLOC_H=1 -DHAVE_ETHER_HOSTTON=1 -DHAVE
> _STRERROR=1  -c ./scanner.c
> gcc -O2 -I.  -Ilinux-include -DHAVE_MALLOC_H=1 -DHAVE_ETHER_HOSTTON=1 -DHAVE
> _STRERROR=1  -Dyylval=pcap_lval -c grammar.c
> ar rc libpcap.a pcap-linux.o pcap.o inet.o gencode.o optimize.o nametoaddr.o
> etherent.o savefile.o bpf_filter.o bpf_image.o scanner.o grammar.o
> ranlib libpcap.a
> make[1]: Leaving directory `/root/sniffit.0.3.5/libpcap-0.3'
> gcc -w -O2 -o sniffit sniffit.0.3.5.c sn_packets.o sn_generation.o
> sn_interface.o sn_cfgfile.o
> sn_logfile.o -I./libpcap-0.3 -L./libpcap-0.3 -lpcap -lncurses  -DHAVE_LIBNCU
> RSES=1 -DHAVE_NCURSES_H=1 -DHAVE_SHMGET=1 -DHAVE_ATEXIT=1 -DSIZEOF_UNSIGNED_
> SHORT_INT=2 -DSIZEOF_UNSIGNED_LONG_INT=4 -DLINUX=1
> strip sniffit
> 
> ________________________________________________
> See http://PLUG.phoenix.az.us/navigator-mail.shtml if your mail doesn't post to the list quickly and you use Netscape to write mail.
> 
> PLUG-discuss mailing list  -  PLUG-discuss@lists.PLUG.phoenix.az.us
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss

-- 
Jiva DeVoe
VP Of Software Development
Opnix, Inc. - Technology Shall Set You Free.
GPG Fingerprint: 0A17 DF84 516A 1DC4 B837  FE6D 3128 41CD 97CB 4AA7